[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <516FBD18.3060501@ti.com>
Date: Thu, 18 Apr 2013 11:30:00 +0200
From: Vincent Stehlé <v-stehle@...com>
To: Dan Murphy <dmurphy@...com>
CC: <b-cousson@...com>, <tony@...mide.com>, <linux@....linux.org.uk>,
<linux-omap@...r.kernel.org>,
<devicetree-discuss@...ts.ozlabs.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the
panda DTS
On 04/17/2013 10:16 PM, Dan Murphy wrote:
> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
> are different.
(..)
> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
> index 03bd60d..0c48f6b 100644
> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
(..)
> @@ -135,6 +136,25 @@
> 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
> >;
> };
> +
> + led_gpio_pins: pinmux_leds_pins {
> + pinctrl-single,pins = <
> + >;
> + };
> +};
Hi,
FYI, there was a recent discussion precisely on this topic, where Tomy
suggested to remove the empty section:
http://marc.info/?l=linux-omap&m=136546635409232&w=2
Apart from that, I just tested your patch on top of Tomy's
omap-for-v3.10/dt branch and it is working fine for me on PandaBoards
EA3, A4 and ES.
Tested-by: Vincent Stehlé <v-stehle@...com>
Best regards,
V.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists