linux-kernel - Re: [PATCH] ARM: kirkwood: add button for OpenBlock A6

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5182C512.4050102@free-electrons.com>
Date:	Thu, 02 May 2013 21:57:06 +0200
From:	Gregory CLEMENT <gregory.clement@...e-electrons.com>
To:	Gregory CLEMENT <gregory.clement@...e-electrons.com>
CC:	Jason Cooper <jason@...edaemon.net>, Andrew Lunn <andrew@...n.ch>,
	Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
	Nobuhiro Iwamatsu <iwamatsu@...auri.org>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: kirkwood: add button for OpenBlock A6

On 05/02/2013 09:43 PM, Gregory CLEMENT wrote:
> The OpenBlocks A6 board has one software-controlled button on the
> front side, labeled "INIT", so we add minimal support for this button
> in the kernel.
> 

Oh, I found that Thomas have already submitted the same patch but I was
misleaded because I didn't find anything related to this in v3.9,
nor in next-20130502.

You can drop this patch of course, but waht happens to Thomas' patch?

> Signed-off-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>
> ---
>  arch/arm/boot/dts/kirkwood-openblocks_a6.dts |   13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
> index d27f724..627d8d0 100644
> --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
> +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
> @@ -209,4 +209,17 @@
>  			gpios = <&gpio1 11 1>;
>  		};
>          };
> +
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +			button@1 {
> +			label = "Init Button";
> +			linux,code = <116>;
> +			gpios = <&gpio1 6 0>;
> +		};
> +	};
> +
>  };
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/