lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 16 May 2013 11:55:45 -0700
From:	Sören Brinkmann <soren.brinkmann@...inx.com>
To:	Mark Brown <broonie@...nel.org>
CC:	Philip Balister <philip@...ister.org>,
	Saravana Kannan <skannan@...eaurora.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	Mike Turquette <mturquette@...aro.org>,
	<linux-kernel@...r.kernel.org>,
	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Subject: Re: [PATCH RFC] clk: Introduce userspace clock driver

On Thu, May 16, 2013 at 06:26:05PM +0100, Mark Brown wrote:
> On Thu, May 16, 2013 at 10:44:16AM -0400, Philip Balister wrote:
> > On 05/16/2013 12:28 AM, Saravana Kannan wrote:
> 
> > > Agreed. I was about to reply with exactly the same point. I haven't done
> > > any UIO coding, but that device file will eventually have to be opened.
> > > Turn on the clocks in the open and turn them off at close.
> 
> > > Rate to request can be a DT property.
> 
> > But you are assuming each device implemented in the fpga uses one clock.
> > This assumption is clearly not valid since devices will ahve to share
> > clocks.
> 
> The binding should obviously be defined as a set of clocks rather than a
> single clock - something like how we specify regulators on PMICs
> probably makes sense.  Each clock can have its own properties.
For a device driver as clock consumer, the bindings etc. are well
defined. Just add the 'clocks' and 'clock-names' props and use the CCF.

	Sören


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ