[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5196580D.1070209@ti.com>
Date: Fri, 17 May 2013 11:17:17 -0500
From: Dan Murphy <dmurphy@...com>
To: Nishanth Menon <nm@...com>, <b-cousson@...com>, <tony@...mide.com>
CC: <linux@....linux.org.uk>, <linux-omap@...r.kernel.org>,
<devicetree-discuss@...ts.ozlabs.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the
panda DTS
On 05/17/2013 11:15 AM, Nishanth Menon wrote:
> On 11:02-20130517, Dan Murphy wrote:
>> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
>> are different.
>>
>> A1-A3 = gpio_wk7
>> ES = gpio_110
>>
>> There is no change to LED D2
>>
>> Abstract away the pinmux and the LED definitions for the two boards into
>> the respective DTS files.
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>> ---
>> Changes in this version:
>> - review comments incorporated.
>> Previous version of this patch was discussed in:
>> https://patchwork.kernel.org/patch/2582771/
> one minor nit,
> $subject could do with space after the ':'
> otherwise, it looks fine to me. Will suggest waiting for further
> reviewers if they have an opinion prior to a new rev.
Thanks NM I will queue up this change locally and await further review prior to sending v7.
>> arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++-
>> arch/arm/boot/dts/omap4-panda-es.dts | 28 ++++++++++++++++++++++++++++
>> 2 files changed, 43 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
>> index 03bd60d..5fd59b3 100644
>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
>> @@ -16,8 +16,13 @@
>> reg = <0x80000000 0x40000000>; /* 1 GB */
>> };
>>
>> - leds {
>> + leds: leds {
>> compatible = "gpio-leds";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <
>> + &led_wkgpio_pins
>> + >;
>> +
>> heartbeat {
>> label = "pandaboard::status1";
>> gpios = <&gpio1 7 0>;
>> @@ -137,6 +142,15 @@
>> };
>> };
>>
>> +&omap4_pmx_wkup {
>> + led_wkgpio_pins: pinmux_leds_wkpins {
>> + pinctrl-single,pins = <
>> + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */
>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
>> + >;
>> + };
>> +};
>> +
>> &i2c1 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&i2c1_pins>;
>> diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
>> index f1d8c21..c968a3b 100644
>> --- a/arch/arm/boot/dts/omap4-panda-es.dts
>> +++ b/arch/arm/boot/dts/omap4-panda-es.dts
>> @@ -34,3 +34,31 @@
>> 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>> >;
>> };
>> +
>> +&omap4_pmx_core {
>> + led_gpio_pins: gpio_led_pmx {
>> + pinctrl-single,pins = <
>> + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */
>> + >;
>> + };
>> +};
>> +
>> +&led_wkgpio_pins {
>> + pinctrl-single,pins = <
>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
>> + >;
>> +};
>> +
>> +&leds {
>> + pinctrl-0 = <
>> + &led_gpio_pins
>> + &led_wkgpio_pins
>> + >;
>> +
>> + heartbeat {
>> + gpios = <&gpio4 14 0>;
>> + };
>> + mmc {
>> + gpios = <&gpio1 8 0>;
>> + };
>> +};
--
------------------
Dan Murphy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists