[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <519FB7F7.7080009@ti.com>
Date: Fri, 24 May 2013 13:56:55 -0500
From: Dan Murphy <dmurphy@...com>
To: Nishanth Menon <nm@...com>, <b-cousson@...com>, <tony@...mide.com>
CC: <linux@....linux.org.uk>, <linux-omap@...r.kernel.org>,
<devicetree-discuss@...ts.ozlabs.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the
panda DTS
On 05/17/2013 11:17 AM, Dan Murphy wrote:
> On 05/17/2013 11:15 AM, Nishanth Menon wrote:
>> On 11:02-20130517, Dan Murphy wrote:
>>> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
>>> are different.
>>>
>>> A1-A3 = gpio_wk7
>>> ES = gpio_110
>>>
>>> There is no change to LED D2
>>>
>>> Abstract away the pinmux and the LED definitions for the two boards into
>>> the respective DTS files.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@...com>
>>> ---
>>> Changes in this version:
>>> - review comments incorporated.
>>> Previous version of this patch was discussed in:
>>> https://patchwork.kernel.org/patch/2582771/
>> one minor nit,
>> $subject could do with space after the ':'
>> otherwise, it looks fine to me. Will suggest waiting for further
>> reviewers if they have an opinion prior to a new rev.
> Thanks NM I will queue up this change locally and await further review prior to sending v7.
>
>>> arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++-
>>> arch/arm/boot/dts/omap4-panda-es.dts | 28 ++++++++++++++++++++++++++++
>>> 2 files changed, 43 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
>>> index 03bd60d..5fd59b3 100644
>>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
>>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
>>> @@ -16,8 +16,13 @@
>>> reg = <0x80000000 0x40000000>; /* 1 GB */
>>> };
>>>
>>> - leds {
>>> + leds: leds {
>>> compatible = "gpio-leds";
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <
>>> + &led_wkgpio_pins
>>> + >;
>>> +
>>> heartbeat {
>>> label = "pandaboard::status1";
>>> gpios = <&gpio1 7 0>;
>>> @@ -137,6 +142,15 @@
>>> };
>>> };
>>>
>>> +&omap4_pmx_wkup {
>>> + led_wkgpio_pins: pinmux_leds_wkpins {
>>> + pinctrl-single,pins = <
>>> + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */
>>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
>>> + >;
>>> + };
>>> +};
>>> +
>>> &i2c1 {
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&i2c1_pins>;
>>> diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
>>> index f1d8c21..c968a3b 100644
>>> --- a/arch/arm/boot/dts/omap4-panda-es.dts
>>> +++ b/arch/arm/boot/dts/omap4-panda-es.dts
>>> @@ -34,3 +34,31 @@
>>> 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>>> >;
>>> };
>>> +
>>> +&omap4_pmx_core {
>>> + led_gpio_pins: gpio_led_pmx {
>>> + pinctrl-single,pins = <
>>> + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */
>>> + >;
>>> + };
>>> +};
>>> +
>>> +&led_wkgpio_pins {
>>> + pinctrl-single,pins = <
>>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
>>> + >;
>>> +};
>>> +
>>> +&leds {
>>> + pinctrl-0 = <
>>> + &led_gpio_pins
>>> + &led_wkgpio_pins
>>> + >;
>>> +
>>> + heartbeat {
>>> + gpios = <&gpio4 14 0>;
>>> + };
>>> + mmc {
>>> + gpios = <&gpio1 8 0>;
>>> + };
>>> +};
>
Any additional comments besides the headline?
If not I will post v7
--
------------------
Dan Murphy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists