| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1369995280-20863-1-git-send-email-ian.campbell@citrix.com>
Date: Fri, 31 May 2013 11:14:40 +0100
From: Ian Campbell <ian.campbell@...rix.com>
To: linux-kernel@...r.kernel.org
CC: Ian Campbell <ian.campbell@...rix.com>,
Shaveta Leekha <shaveta@...escale.com>,
Minghuan Lian <Minghuan.Lian@...escale.com>,
Andy Fleming <afleming@...escale.com>,
Poonam Aggrwal <poonam.aggrwal@...escale.com>,
Ramneek Mehresh <ramneek.mehresh@...escale.com>,
Kumar Gala <galak@...nel.crashing.org>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Paul Mackerras <paulus@...ba.org>,
linuxppc-dev@...ts.ozlabs.org
Subject: [PATCH] powerpc/fsl-booke: Rename b4qds.dts -> b4qds.dtsi.
This file is a common include for B4860 and B4420 but is not a valid DTS itself:
DTC arch/powerpc/boot/b4qds.dtb
Error: arch/powerpc/boot/dts/b4qds.dts:35.1-2 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [arch/powerpc/boot/b4qds.dtb] Error 1
make: *** [b4qds.dtb] Error 2
I spotted in build tests of device-tree.git, announcement
https://lkml.org/lkml/2013/4/24/209, which builds *.dts. Probably no one would
do this this in real life on linux.git but it still seems worth fixing.
Signed-off-by: Ian Campbell <ian.campbell@...rix.com>
Cc: Shaveta Leekha <shaveta@...escale.com>
Cc: Minghuan Lian <Minghuan.Lian@...escale.com>
Cc: Andy Fleming <afleming@...escale.com>
Cc: Poonam Aggrwal <poonam.aggrwal@...escale.com>
Cc: Ramneek Mehresh <ramneek.mehresh@...escale.com>
Cc: Kumar Gala <galak@...nel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Cc: Paul Mackerras <paulus@...ba.org>
Cc: linuxppc-dev@...ts.ozlabs.org
Cc: linux-kernel@...r.kernel.org
---
arch/powerpc/boot/dts/b4420qds.dts | 2 +-
arch/powerpc/boot/dts/b4860qds.dts | 2 +-
arch/powerpc/boot/dts/b4qds.dts | 169 ------------------------------------
arch/powerpc/boot/dts/b4qds.dtsi | 169 ++++++++++++++++++++++++++++++++++++
4 files changed, 171 insertions(+), 171 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/b4qds.dts
create mode 100644 arch/powerpc/boot/dts/b4qds.dtsi
diff --git a/arch/powerpc/boot/dts/b4420qds.dts b/arch/powerpc/boot/dts/b4420qds.dts
index 923156d..508dbdf 100644
--- a/arch/powerpc/boot/dts/b4420qds.dts
+++ b/arch/powerpc/boot/dts/b4420qds.dts
@@ -33,7 +33,7 @@
*/
/include/ "fsl/b4420si-pre.dtsi"
-/include/ "b4qds.dts"
+/include/ "b4qds.dtsi"
/ {
model = "fsl,B4420QDS";
diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/b4860qds.dts
index 78907f3..6bb3707 100644
--- a/arch/powerpc/boot/dts/b4860qds.dts
+++ b/arch/powerpc/boot/dts/b4860qds.dts
@@ -33,7 +33,7 @@
*/
/include/ "fsl/b4860si-pre.dtsi"
-/include/ "b4qds.dts"
+/include/ "b4qds.dtsi"
/ {
model = "fsl,B4860QDS";
diff --git a/arch/powerpc/boot/dts/b4qds.dts b/arch/powerpc/boot/dts/b4qds.dts
deleted file mode 100644
index e6d2f8f..0000000
--- a/arch/powerpc/boot/dts/b4qds.dts
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * B4420DS Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of
- * this software, even if advised of the possibility of such damage.
- */
-
-/ {
- model = "fsl,B4QDS";
- compatible = "fsl,B4QDS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- ifc: localbus@...124000 {
- reg = <0xf 0xfe124000 0 0x2000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000
- 2 0 0xf 0xff800000 0x00010000
- 3 0 0xf 0xffdf0000 0x00008000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,ifc-nand";
- reg = <0x2 0x0 0x10000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@...000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@...000 {
- /* 10MB for Linux Kernel Image */
- reg = <0x00200000 0x00A00000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@...000 {
- /* 500MB for Root file System Image */
- reg = <0x00c00000 0x1F400000>;
- label = "NAND RFS Image";
- };
- };
-
- board-control@3,0 {
- compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis";
- reg = <3 0 0x300>;
- };
- };
-
- memory {
- device_type = "memory";
- };
-
- dcsr: dcsr@...000000 {
- ranges = <0x00000000 0xf 0x00000000 0x01052000>;
- };
-
- soc: soc@...000000 {
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
- spi@...000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "sst,sst25wf040";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
- };
- };
-
- sdhc@...000 {
- /*Disabled as there is no sdhc connector on B4420QDS board*/
- status = "disabled";
- };
-
- i2c@...000 {
- eeprom@50 {
- compatible = "at24,24c64";
- reg = <0x50>;
- };
- eeprom@51 {
- compatible = "at24,24c256";
- reg = <0x51>;
- };
- eeprom@53 {
- compatible = "at24,24c256";
- reg = <0x53>;
- };
- eeprom@57 {
- compatible = "at24,24c256";
- reg = <0x57>;
- };
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- };
- };
-
- usb@...000 {
- dr_mode = "host";
- phy_type = "ulpi";
- };
-
- };
-
- pci0: pcie@...200000 {
- reg = <0xf 0xfe200000 0 0x10000>;
- ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
- 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
- pcie@0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-
-};
-
-/include/ "fsl/b4si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/b4qds.dtsi
new file mode 100644
index 0000000..e6d2f8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/b4qds.dtsi
@@ -0,0 +1,169 @@
+/*
+ * B4420DS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/ {
+ model = "fsl,B4QDS";
+ compatible = "fsl,B4QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ ifc: localbus@...124000 {
+ reg = <0xf 0xfe124000 0 0x2000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 2 0 0xf 0xff800000 0x00010000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@...000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@...000 {
+ /* 10MB for Linux Kernel Image */
+ reg = <0x00200000 0x00A00000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@...000 {
+ /* 500MB for Root file System Image */
+ reg = <0x00c00000 0x1F400000>;
+ label = "NAND RFS Image";
+ };
+ };
+
+ board-control@3,0 {
+ compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis";
+ reg = <3 0 0x300>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@...000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01052000>;
+ };
+
+ soc: soc@...000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ spi@...000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst,sst25wf040";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+ };
+ };
+
+ sdhc@...000 {
+ /*Disabled as there is no sdhc connector on B4420QDS board*/
+ status = "disabled";
+ };
+
+ i2c@...000 {
+ eeprom@50 {
+ compatible = "at24,24c64";
+ reg = <0x50>;
+ };
+ eeprom@51 {
+ compatible = "at24,24c256";
+ reg = <0x51>;
+ };
+ eeprom@53 {
+ compatible = "at24,24c256";
+ reg = <0x53>;
+ };
+ eeprom@57 {
+ compatible = "at24,24c256";
+ reg = <0x57>;
+ };
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ usb@...000 {
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+
+ };
+
+ pci0: pcie@...200000 {
+ reg = <0xf 0xfe200000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+};
+
+/include/ "fsl/b4si-post.dtsi"
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists