| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1370261333-5121-1-git-send-email-j-keerthy@ti.com>
Date: Mon, 3 Jun 2013 17:38:53 +0530
From: J Keerthy <j-keerthy@...com>
To: <linux-kernel@...r.kernel.org>
CC: <linux-doc@...r.kernel.org>, <devicetree-discuss@...ts.ozlabs.org>,
<swarren@...dotorg.org>, <broonie@...nsource.wolfsonmicro.com>,
<rob.herring@...xeda.com>, <rob@...dley.net>,
<mturquette@...aro.org>, <sameo@...ux.intel.com>, <wim@...ana.be>,
<lgirdwood@...il.com>, <gg@...mlogic.co.uk>, <t-kristo@...com>,
J Keerthy <j-keerthy@...com>, Ian Lartey <ian@...mlogic.co.uk>
Subject: [PATCH] mfd: DT bindings for the palmas family MFD
From: Graeme Gregory <gg@...mlogic.co.uk>
Add the various binding files for the palmas family of chips. There is a
top level MFD binding then a seperate binding for regulators IP blocks on chips.
Signed-off-by: Graeme Gregory <gg@...mlogic.co.uk>
Signed-off-by: J Keerthy <j-keerthy@...com>
Signed-off-by: Ian Lartey <ian@...mlogic.co.uk>
---
Documentation/devicetree/bindings/mfd/palmas.txt | 49 ++++++
.../devicetree/bindings/regulator/palmas-pmic.txt | 165 ++++++++++++++++++++
2 files changed, 214 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/palmas.txt
create mode 100644 Documentation/devicetree/bindings/regulator/palmas-pmic.txt
diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt
new file mode 100644
index 0000000..c6c5e78
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/palmas.txt
@@ -0,0 +1,49 @@
+* palmas device tree bindings
+
+The TI palmas family current members :-
+twl6035 (palmas)
+twl6037 (palmas)
+tps65913 (palmas)
+tps65914 (palmas)
+
+Required properties:
+- compatible : Should be from the list
+ ti,twl6035
+ ti,twl6036
+ ti,twl6037
+ ti,tps65913
+ ti,tps65914
+ ti,tps80036
+and also the generic series names
+ ti,palmas
+- interrupt-controller : palmas has its own internal IRQs
+- #interrupt-cells : should be set to 2 for IRQ number and flags
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupts.txt
+- interrupt-parent : The parent interrupt controller.
+
+Optional properties:
+ ti,mux_padX : set the pad register X (1-2) to the correct muxing for the
+ hardware, if not set will use muxing in OTP.
+
+Example:
+
+palmas {
+ compatible = "ti,twl6035", "ti,palmas";
+ reg = <0x48>
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ti,mux-pad1 = <0>;
+ ti,mux-pad2 = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic {
+ compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+ ....
+ };
+}
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
new file mode 100644
index 0000000..f7bbc3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -0,0 +1,165 @@
+* palmas regulator IP block devicetree bindings
+
+Required properties:
+- compatible : Should be from the list
+ ti,twl6035-pmic
+ ti,twl6036-pmic
+ ti,twl6037-pmic
+ ti,tps65913-pmic
+ ti,tps65914-pmic
+and also the generic series names
+ ti,palmas-pmic
+
+Optional properties:
+- ti,ldo6-vibrator : ldo6 is in vibrator mode
+
+Optional nodes:
+- regulators : should contain the constrains and init information for the
+ regulators. It should contain a subnode per regulator from the
+ list.
+ For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
+ smps45, smps457, smps7 depending on varient, smps6, smps[8-10],
+ ldo[1-9], ldoln, ldousb
+
+ optional chip specific regulator fields :-
+ ti,warm-reset - maintain voltage during warm reset(boolean)
+ ti,roof-floor - control voltage selection by pin(boolean)
+ ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto,
+ 2 - eco, 3 - forced pwm
+ ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us
+ ti,smps-range - OTP has the wrong range set for the hardware so override
+ 0 - low range, 1 - high range
+
+Example:
+
+pmic@0 {
+ compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+ interrupt-parent = <&palmas>;
+ interrupts = <14 0>;
+ interrupt-name = "short-irq";
+
+ ti,ldo6_vibrator;
+
+ regulators {
+ smps12_reg : smps12 {
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,warm-reset;
+ ti,roof-floor;
+ ti,mode-sleep = <0>;
+ ti,tstep = <0>;
+ ti,smps-range = <1>;
+ };
+
+ smps3_reg: smps3 {
+ regulator-name = "smps3";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ };
+
+ smps45_reg: smps45 {
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ };
+
+ smps6_reg: smps6 {
+ regulator-name = "smps6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ smps7_reg: smps7 {
+ regulator-name = "smps7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ smps8_reg: smps8 {
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ };
+
+ smps9_reg: smps9 {
+ regulator-name = "smps9";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ smps10_reg: smps10 {
+ regulator-name = "smps10";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "ldo8";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldoln_reg: ldoln {
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldousb_reg: ldousb {
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3250000>;
+ };
+ };
+};
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists