linux-kernel - Re: [RFC PATCH 1/4] arm: omap: Add phy binding info for musb in plat data

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <51BAABB0.5060107@ti.com>
Date:	Fri, 14 Jun 2013 11:05:44 +0530
From:	Kishon Vijay Abraham I <kishon@...com>
To:	Tomi Valkeinen <tomi.valkeinen@...com>
CC:	<tony@...mide.com>, <balbi@...com>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-usb@...r.kernel.org>, <linux@....linux.org.uk>,
	<eballetbo@...il.com>, <javier@...hile0.org>,
	<gregkh@...uxfoundation.org>
Subject: Re: [RFC PATCH 1/4] arm: omap: Add phy binding info for musb in plat
 data

Hi,

On Thursday 13 June 2013 06:35 PM, Tomi Valkeinen wrote:
> Hi,
>
> On 28/05/13 08:18, Kishon Vijay Abraham I wrote:
>> Hi Tony,
>>
>> On Friday 17 May 2013 06:52 PM, Kishon Vijay Abraham I wrote:
>>> In order for controllers to get PHY in case of non dt boot, the phy
>>> binding information (phy label) should be added in the platform
>>> data of the controller.
>>
>> This series would be needed to get MUSB working in OMAP3 boards for
>> non-dt boot case. Do you think this is good enough to go in this rc cycle?
>
> Did this or some other solution go forward? I'm still unable to boot
> with usb-gadget-ethernet with v3.10-rc5.

No. I think Tony is ok to take this only during next merge window.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/