| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 21 Jun 2013 09:33:11 +0530
From: amit daniel kachhap <amit.daniel@...sung.com>
To: Eduardo Valentin <eduardo.valentin@...com>
Cc: linux-pm@...r.kernel.org, Zhang Rui <rui.zhang@...el.com>,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Kukjin Kim <kgene.kim@...sung.com>,
Lukasz Majewski <l.majewski@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>
Subject: Re: [PATCH V2] thermal: exynos: Support for TMU regulator defined at
device tree
On Thu, Jun 20, 2013 at 1:33 AM, Eduardo Valentin
<eduardo.valentin@...com> wrote:
> On 02-05-2013 06:18, Amit Daniel Kachhap wrote:
>> TMU probe function now checks for a device tree defined regulator.
>> For compatibility reasons it is allowed to probe driver even without
>> this regulator defined.
>>
>> Signed-off-by: Luk asz Majewski <l.majewski@...sung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
>
> I assume this one got superseeded by the same patch on your 30 patch
> series, right?
> https://patchwork.kernel.org/patch/2731031/
Yes right. In my re-structuring patch series this one is included.
>
>
>> ---
>>
>> Changes in V2:
>> * Added log message in regulator_get failure as suggested by Sylwester.
>> * Used IS_ERR for checking regulator pointer as suggested by Sylwester.
>>
>> This patch is repost of the patch posted by Lukasz Majewski
>> (https://patchwork.kernel.org/patch/2488211/). I have rebased this
>> patch on top of my TMU re-structured patch series
>> (http://lwn.net/Articles/548634/). Although I thought of handling
>> regulator as one type of feature (newly added) but could not do
>> so as regulator is a board/platform property and not SOC property so
>> leaving the device tree to define and handle it.
>>
>> .../devicetree/bindings/thermal/exynos-thermal.txt | 4 ++++
>> drivers/thermal/samsung/exynos_tmu.c | 19 +++++++++++++++++++
>> 2 files changed, 23 insertions(+), 0 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>> index 970eeba..ff62f7a 100644
>> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>> @@ -14,6 +14,9 @@
>> - interrupts : Should contain interrupt for thermal system
>> - clocks : The main clock for TMU device
>> - clock-names : Thermal system clock name
>> +- vtmu-supply: This entry is optional and provides the regulator node supplying
>> + voltage to TMU. If needed this entry can be placed inside
>> + board/platform specific dts file.
>>
>> Example 1):
>>
>> @@ -25,6 +28,7 @@ Example 1):
>> clocks = <&clock 383>;
>> clock-names = "tmu_apbif";
>> status = "disabled";
>> + vtmu-supply = <&tmu_regulator_node>;
>> };
>>
>> Example 2):
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>> index 72446c9..b7c609a 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -32,6 +32,7 @@
>> #include <linux/of_address.h>
>> #include <linux/of_irq.h>
>> #include <linux/platform_device.h>
>> +#include <linux/regulator/consumer.h>
>> #include <linux/slab.h>
>> #include <linux/workqueue.h>
>> #include "exynos_thermal_common.h"
>> @@ -52,6 +53,7 @@
>> * @clk: pointer to the clock structure.
>> * @temp_error1: fused value of the first point trim.
>> * @temp_error2: fused value of the second point trim.
>> + * @regulator: pointer to the TMU regulator structure.
>> * @reg_conf: pointer to structure to register with core thermal.
>> */
>> struct exynos_tmu_data {
>> @@ -65,6 +67,7 @@ struct exynos_tmu_data {
>> struct mutex lock;
>> struct clk *clk;
>> u8 temp_error1, temp_error2;
>> + struct regulator *regulator;
>> struct thermal_sensor_conf *reg_conf;
>> };
>>
>> @@ -501,10 +504,23 @@ static int exynos_map_dt_data(struct platform_device *pdev)
>> struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>> struct exynos_tmu_platform_data *pdata = data->pdata;
>> struct resource res;
>> + int ret;
>>
>> if (!data)
>> return -ENODEV;
>>
>> + /* Try enabling the regulator if found */
>> + data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
>> + if (!IS_ERR(data->regulator)) {
>> + ret = regulator_enable(data->regulator);
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to enable vtmu\n");
>> + return ret;
>> + }
>> + } else {
>> + dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
>> + }
>> +
>> data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
>> if (data->id < 0)
>> data->id = 0;
>> @@ -669,6 +685,9 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>>
>> clk_unprepare(data->clk);
>>
>> + if (!IS_ERR(data->regulator))
>> + regulator_disable(data->regulator);
>> +
>> platform_set_drvdata(pdev, NULL);
>>
>> return 0;
>>
>
>
> --
> You have got to be excited about what you are doing. (L. Lamport)
>
> Eduardo Valentin
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists