[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <51D2B2A3.3080402@ti.com>
Date: Tue, 2 Jul 2013 16:29:47 +0530
From: Sourav Poddar <sourav.poddar@...com>
To: Sekhar Nori <nsekhar@...com>
CC: <broonie@...nel.org>, <spi-devel-general@...ts.sourceforge.net>,
<grant.likely@...aro.org>, <balbi@...com>, <rnayak@...com>,
<linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCHv2] drivers: spi: Add qspi flash controller
Hi Sekhar,
On Tuesday 02 July 2013 04:27 PM, Sekhar Nori wrote:
> On 7/2/2013 2:26 PM, Sourav Poddar wrote:
>> The patch add basic support for the quad spi controller.
>>
>> QSPI is a kind of spi module that allows single,
>> dual and quad read access to external spi devices. The module
>> has a memory mapped interface which provide direct interface
>> for accessing data form external spi devices.
>>
>> The patch will configure controller clocks, device control
>> register and for defining low level transfer apis which
>> will be used by the spi framework to transfer data to
>> the slave spi device(flash in this case).
>>
>> Signed-off-by: Sourav Poddar<sourav.poddar@...com>
>> ---
>> This patch was sent as a part of a series[1];
>> but this can go in as a standalone patch.
>> [1]: https://lkml.org/lkml/2013/6/26/83
>>
>> v1->v2:
>> 1. Placed pm specific calls in prepare/unprepare apis.
>> 2. Put a mask to support upto 32 bits word length.
>> 3. Used "devm_ioremap_resource" variants.
>> 4. Add dt binding doumentation.
>> Documentation/devicetree/bindings/spi/ti_qspi.txt | 22 ++
>> drivers/spi/Kconfig | 8 +
>> drivers/spi/Makefile | 1 +
>> drivers/spi/ti-qspi.c | 357 +++++++++++++++++++++
>> 4 files changed, 388 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/spi/ti_qspi.txt
>> create mode 100644 drivers/spi/ti-qspi.c
> Please cc devicetree-discuss list when adding new bindings.
>
Ok.
>> +static int dra7xxx_qspi_probe(struct platform_device *pdev)
>> +{
>> + struct dra7xxx_qspi *qspi;
>> + struct spi_master *master;
>> + struct resource *r;
>> + struct device_node *np = pdev->dev.of_node;
>> + u32 max_freq;
>> + int ret;
>> +
>> + master = spi_alloc_master(&pdev->dev, sizeof(*qspi));
>> + if (!master)
>> + return -ENOMEM;
>> +
>> + master->mode_bits = SPI_CPOL | SPI_CPHA;
>> +
>> + master->num_chipselect = 1;
>> + master->bus_num = -1;
>> + master->setup = dra7xxx_qspi_setup;
>> + master->prepare_transfer_hardware = dra7xxx_qspi_prepare_xfer;
>> + master->transfer_one_message = dra7xxx_qspi_start_transfer_one;
>> + master->unprepare_transfer_hardware = dra7xxx_qspi_unprepare_xfer;
>> + master->dev.of_node = pdev->dev.of_node;
>> + master->bits_per_word_mask = BIT(32 - 1) | BIT(16 - 1) | BIT(8 - 1);
>> +
>> + dev_set_drvdata(&pdev->dev, master);
>> +
>> + qspi = spi_master_get_devdata(master);
>> + qspi->master = master;
>> + qspi->dev =&pdev->dev;
>> +
>> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (r == NULL) {
>> + ret = -ENODEV;
>> + goto free_master;
>> + }
>> +
>> + qspi->base = devm_ioremap_resource(&pdev->dev, r);
>> + if (!qspi->base) {
>> + dev_dbg(&pdev->dev, "can't ioremap MCSPI\n");
>> + ret = -ENOMEM;
>> + goto free_master;
>> + }
> This should be
>
> if (IS_ERR(qspi->base)) {
> dev_dbg(&pdev->dev, "can't ioremap QSPI\n");
> ret = PTR_ERR(qspi->base);
> goto free_master;
> }
>
Ok. will change it in next version.
> Thanks,
> Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists