[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1372860295-8306-4-git-send-email-mika.westerberg@linux.intel.com>
Date: Wed, 3 Jul 2013 17:04:50 +0300
From: Mika Westerberg <mika.westerberg@...ux.intel.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>
Cc: Jesse Barnes <jbarnes@...tuousgeek.org>,
Yinghai Lu <yinghai@...nel.org>, john.ronciak@...el.com,
miles.j.penner@...el.com, bruce.w.allan@...el.com,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
"Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
linux-kernel@...r.kernel.org, linux-acpi@...r.kernel.org,
linux-pci@...r.kernel.org, x86@...nel.org
Subject: [PATCH v2 3/8] PCI: acpiphp: enable_device(): rescan even if no new devices on slot
From: "Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>
pci_scan_slot() returns number of new devices connected *directly*
connected to the slot. Current enable_device() checks the return value
and stops if it doesn't see a new device.
In Thunderbolt chaining case the new device can be deeper in hierarchy, so
do the rescan anyway.
Because of that we must make sure that pcibios_resource_survey_bus() and
check_hotplug_bridge() get called only for a just found bus and not the
ones already added to the system. Failure to do so will lead to resource
conflicts.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@...ux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
---
drivers/pci/hotplug/acpiphp_glue.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index b983e29..0f4da3b 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -685,18 +685,13 @@ static int __ref enable_device(struct acpiphp_slot *slot)
struct pci_dev *dev;
struct pci_bus *bus = slot->bridge->pci_bus;
struct acpiphp_func *func;
- int num, max, pass;
+ int max, pass;
LIST_HEAD(add_list);
list_for_each_entry(func, &slot->funcs, sibling)
acpiphp_bus_add(func);
- num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0));
- if (num == 0) {
- /* Maybe only part of funcs are added. */
- dbg("No new device found\n");
- goto err_exit;
- }
+ pci_scan_slot(bus, PCI_DEVFN(slot->device, 0));
max = acpiphp_max_busnr(bus);
for (pass = 0; pass < 2; pass++) {
@@ -742,8 +737,6 @@ static int __ref enable_device(struct acpiphp_slot *slot)
}
}
-
- err_exit:
return 0;
}
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists