| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1374068866-13977-1-git-send-email-b.brezillon@overkiz.com>
Date: Wed, 17 Jul 2013 15:47:46 +0200
From: Boris BREZILLON <b.brezillon@...rkiz.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>,
Ludovic Desroches <ludovic.desroches@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Mike Turquette <mturquette@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Boris BREZILLON <b.brezillon@...rkiz.com>
Subject: [PATCH v2 07/42] ARM: at91: add PMC programmable clocks
This is the at91 programmable clocks implementation using common clk
framework.
A programmable clock is a clock which can be exported on a given pin to clock
external devices.
Each programmable clock is given an id (from 0 to 8).
The number of available programmable clocks depends on the SoC you're using.
Programmable clock driver only implements the clock setting (clock rate and
parent setting). It must be chained to a system clock in order to
enable/disable the generated clock.
The PCKX pins used to output the clock signals must be assigned to the
appropriate peripheral (see atmel's datasheets).
Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
---
drivers/clk/at91/Makefile | 2 +
drivers/clk/at91/clk-programmable.c | 368 +++++++++++++++++++++++++++++++++++
include/linux/clk/at91.h | 18 ++
3 files changed, 388 insertions(+)
create mode 100644 drivers/clk/at91/clk-programmable.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 3e2a670..2d7c119 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -4,3 +4,5 @@
obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
obj-y += clk-system.o clk-peripheral.o
+
+obj-$(CONFIG_AT91_PROGRAMMABLE_CLOCKS) += clk-programmable.o
diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
new file mode 100644
index 0000000..21829fc
--- /dev/null
+++ b/drivers/clk/at91/clk-programmable.c
@@ -0,0 +1,368 @@
+/*
+ * drivers/clk/at91/clk-programmable.c
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@...rkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#define PROG_SOURCE_MAX 5
+#define PROG_MAX 8
+
+#define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw)
+struct clk_programmable {
+ struct clk_hw hw;
+ u8 id;
+ u8 css;
+ u8 pres;
+ u8 slckmck;
+ struct clk_programmable_layout *layout;
+};
+
+static int clk_programmable_prepare(struct clk_hw *hw)
+{
+ u32 tmp;
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ struct clk_programmable_layout *layout = prog->layout;
+ tmp = prog->css | (prog->pres << layout->pres_shift);
+ if (layout->have_slck_mck && prog->slckmck)
+ tmp |= 1 << 8;
+ at91_pmc_write(AT91_PMC_PCKR(prog->id), tmp);
+ while (!(at91_pmc_read(AT91_PMC_SR) & (1 << (prog->id + 8))))
+ ;
+ return 0;
+}
+
+static int clk_programmable_is_prepared(struct clk_hw *hw)
+{
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ return !!(at91_pmc_read(AT91_PMC_SR) & (1 << (prog->id + 8)));
+}
+
+static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 tmp;
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ struct clk_programmable_layout *layout = prog->layout;
+ tmp = at91_pmc_read(AT91_PMC_PCKR(prog->id));
+ prog->pres = (tmp >> layout->pres_shift) & 0x7;
+ return parent_rate >> prog->pres;
+}
+
+static long clk_programmable_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long best_rate = *parent_rate;
+ unsigned long best_diff;
+ unsigned long new_diff;
+ unsigned long cur_rate;
+ int shift = shift;
+
+ if (rate > *parent_rate)
+ return *parent_rate;
+ else
+ best_diff = *parent_rate - rate;
+
+ if (!best_diff)
+ return best_rate;
+
+ for (shift = 1; shift < 7; shift++) {
+ cur_rate = *parent_rate >> shift;
+
+ if (cur_rate > rate)
+ new_diff = cur_rate - rate;
+ else
+ new_diff = rate - cur_rate;
+
+ if (!new_diff)
+ return cur_rate;
+
+ if (new_diff < best_diff) {
+ best_diff = new_diff;
+ best_rate = cur_rate;
+ }
+
+ if (rate > cur_rate)
+ break;
+
+ }
+
+ return best_rate;
+}
+
+static int clk_programmable_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ struct clk_programmable_layout *layout = prog->layout;
+ if (index > layout->css_mask) {
+ if (index == 4 && layout->have_slck_mck) {
+ prog->css = 0;
+ prog->slckmck = 1;
+ return 0;
+ } else
+ return -EINVAL;
+ }
+
+ prog->css = index;
+ return 0;
+}
+
+static u8 clk_programmable_get_parent(struct clk_hw *hw)
+{
+ u32 tmp;
+ u8 ret;
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ struct clk_programmable_layout *layout = prog->layout;
+ tmp = at91_pmc_read(AT91_PMC_PCKR(prog->id));
+ prog->css = tmp & layout->css_mask;
+ ret = prog->css;
+ if (layout->have_slck_mck) {
+ prog->slckmck = !!(tmp & (1 << 8));
+ if (prog->slckmck && !ret)
+ ret = 4;
+ }
+
+ return ret;
+}
+
+static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ unsigned long best_rate = parent_rate;
+ unsigned long best_diff;
+ unsigned long new_diff;
+ unsigned long cur_rate;
+ int shift = 0;
+
+ if (rate > parent_rate)
+ return parent_rate;
+ else
+ best_diff = parent_rate - rate;
+
+ if (!best_diff) {
+ prog->pres = shift;
+ return 0;
+ }
+
+ for (shift = 1; shift < 7; shift++) {
+ cur_rate = parent_rate >> shift;
+
+ if (cur_rate > rate)
+ new_diff = cur_rate - rate;
+ else
+ new_diff = rate - cur_rate;
+
+ if (!new_diff)
+ break;
+
+ if (new_diff < best_diff) {
+ best_diff = new_diff;
+ best_rate = cur_rate;
+ }
+
+ if (rate > cur_rate)
+ break;
+
+ }
+
+ prog->pres = shift;
+ return 0;
+}
+
+static const struct clk_ops programmable_ops = {
+ .prepare = clk_programmable_prepare,
+ .is_prepared = clk_programmable_is_prepared,
+ .recalc_rate = clk_programmable_recalc_rate,
+ .round_rate = clk_programmable_round_rate,
+ .get_parent = clk_programmable_get_parent,
+ .set_parent = clk_programmable_set_parent,
+ .set_rate = clk_programmable_set_rate,
+};
+
+struct clk * __init
+at91_clk_register_programmable(const char *name, const char **parent_names,
+ u8 num_parents, u8 id,
+ struct clk_programmable_layout *layout)
+{
+ struct clk_programmable *prog;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ id &= 7;
+
+ prog = kzalloc(sizeof(*prog), GFP_KERNEL);
+ if (!prog)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &programmable_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+
+ prog->id = id;
+ prog->layout = layout;
+ prog->hw.init = &init;
+
+ clk = clk_register(NULL, &prog->hw);
+
+ if (IS_ERR(clk))
+ kfree(prog);
+
+ return clk;
+}
+
+struct clk_programmable_layout at91rm9200_programmable_layout = {
+ .pres_shift = 2,
+ .css_mask = 0x3,
+ .have_slck_mck = 0,
+};
+
+struct clk_programmable_layout at91sam9g45_programmable_layout = {
+ .pres_shift = 2,
+ .css_mask = 0x3,
+ .have_slck_mck = 1,
+};
+
+struct clk_programmable_layout at91sam9x5_programmable_layout = {
+ .pres_shift = 4,
+ .css_mask = 0x7,
+ .have_slck_mck = 0,
+};
+
+#if defined(CONFIG_OF)
+struct clk_prog_data {
+ struct clk **clks;
+ u8 *ids;
+ unsigned int clk_num;
+};
+
+static struct clk * __init
+of_clk_src_periph_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct clk_prog_data *clk_data = data;
+ unsigned int id = clkspec->args[0];
+ int i;
+
+ if (id >= PROG_MAX)
+ goto err;
+
+ for (i = 0; i < clk_data->clk_num; i++) {
+ if (clk_data->ids[i] == id)
+ return clk_data->clks[i];
+ }
+
+err:
+ pr_err("%s: invalid clock id %d\n", __func__, id);
+ return ERR_PTR(-EINVAL);
+}
+
+static void __init
+of_at91_clk_prog_setup(struct device_node *np,
+ struct clk_programmable_layout *layout)
+{
+ int num;
+ u32 id;
+ int i;
+ struct clk *clk;
+ int num_parents;
+ u8 *ids;
+ struct clk **clks;
+ struct clk_prog_data *clktab;
+ const char *parent_names[PROG_SOURCE_MAX];
+ const char *name;
+ struct device_node *progclknp;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ num = of_get_child_count(np);
+ if (!num || num > PROG_MAX)
+ return;
+
+ clktab = kzalloc(sizeof(*clktab), GFP_KERNEL);
+ if (!clktab)
+ return;
+
+ ids = kzalloc(num * sizeof(*ids), GFP_KERNEL);
+ if (!ids)
+ goto out_free_clktab;
+
+ clks = kzalloc(num * sizeof(*clks), GFP_KERNEL);
+ if (!clks)
+ goto out_free_ids;
+
+ i = 0;
+ for_each_child_of_node(np, progclknp) {
+ name = progclknp->name;
+
+ if (of_property_read_u32(progclknp, "id", &id))
+ goto out_free_clks;
+ if (id >= PROG_MAX)
+ goto out_free_clks;
+
+ clk = at91_clk_register_programmable(name, parent_names,
+ num_parents, id, layout);
+ if (IS_ERR(clk))
+ goto out_free_clks;
+
+ clks[i] = clk;
+ ids[i++] = id;
+ }
+
+ clktab->clk_num = num;
+ clktab->clks = clks;
+ clktab->ids = ids;
+ of_clk_add_provider(np, of_clk_src_periph_get, clktab);
+ return;
+
+out_free_clks:
+ kfree(clks);
+out_free_ids:
+ kfree(ids);
+out_free_clktab:
+ kfree(clktab);
+}
+
+
+static void __init of_at91rm9200_clk_prog_setup(struct device_node *np)
+{
+ of_at91_clk_prog_setup(np, &at91rm9200_programmable_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_prog, "atmel,at91rm9200-clk-programmable",
+ of_at91rm9200_clk_prog_setup);
+
+static void __init of_at91sam9g45_clk_prog_setup(struct device_node *np)
+{
+ of_at91_clk_prog_setup(np, &at91sam9g45_programmable_layout);
+}
+CLK_OF_DECLARE(at91sam9g45_clk_prog, "atmel,at91sam9g45-clk-programmable",
+ of_at91sam9g45_clk_prog_setup);
+
+static void __init of_at91sam9x5_clk_prog_setup(struct device_node *np)
+{
+ of_at91_clk_prog_setup(np, &at91sam9x5_programmable_layout);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_prog, "atmel,at91sam9x5-clk-programmable",
+ of_at91sam9x5_clk_prog_setup);
+#endif
diff --git a/include/linux/clk/at91.h b/include/linux/clk/at91.h
index 112a060..3cafd36 100644
--- a/include/linux/clk/at91.h
+++ b/include/linux/clk/at91.h
@@ -224,6 +224,12 @@ struct clk_master_layout {
u8 pres_shift;
};
+struct clk_programmable_layout {
+ u8 pres_shift;
+ u8 css_mask;
+ u8 have_slck_mck;
+};
+
struct clk * __init
at91_clk_register_main(const char *name,
@@ -270,4 +276,16 @@ struct clk * __init
at91_clk_register_sam9x5_peripheral(const char *name, const char *parent_name,
u32 id, u32 default_div);
+
+extern struct clk_programmable_layout at91rm9200_programmable_layout;
+
+extern struct clk_programmable_layout at91sam9g45_programmable_layout;
+
+extern struct clk_programmable_layout at91sam9x5_programmable_layout;
+
+struct clk * __init
+at91_clk_register_programmable(const char *name, const char **parent_names,
+ u8 num_parents, u8 id,
+ struct clk_programmable_layout *layout);
+
#endif
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists