| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1374162866-14981-1-git-send-email-prabhakar.csengg@gmail.com>
Date: Thu, 18 Jul 2013 21:24:26 +0530
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: LMML <linux-media@...r.kernel.org>
Cc: DLOS <davinci-linux-open-source@...ux.davincidsp.com>,
LKML <linux-kernel@...r.kernel.org>,
devicetree-discuss@...ts.ozlabs.org, linux-doc@...r.kernel.org,
"Lad, Prabhakar" <prabhakar.csengg@...il.com>
Subject: [PATCH v4] media: i2c: tvp7002: add OF support
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
add OF support for the tvp7002 driver.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@...il.com>
---
This patch depends on https://patchwork.kernel.org/patch/2828800/
Changes for v4:
1: Improved descrition of end point properties.
Changes for v3:
1: Fixed review comments pointed by Sylwester.
.../devicetree/bindings/media/i2c/tvp7002.txt | 53 ++++++++++++++++
drivers/media/i2c/tvp7002.c | 67 ++++++++++++++++++--
2 files changed, 113 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp7002.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
new file mode 100644
index 0000000..1d00935
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
@@ -0,0 +1,53 @@
+* Texas Instruments TV7002 video decoder
+
+The TVP7002 device supports digitizing of video and graphics signal in RGB and
+YPbPr color space.
+
+Required Properties :
+- compatible : Must be "ti,tvp7002"
+
+Optional Properties:
+- hsync-active: HSYNC Polarity configuration for the bus. Default value when
+ this property is not specified is <0>.
+
+- vsync-active: VSYNC Polarity configuration for the bus. Default value when
+ this property is not specified is <0>.
+
+- pclk-sample: Clock polarity of the bus. Default value when this property is
+ not specified is <0>.
+
+- sync-on-green-active: Active state of Sync-on-green signal property of the
+ endpoint.
+ 0 = Normal Operation (Default)
+ 1 = Inverted operation
+
+- field-even-active: Active-high Field ID output polarity control of the bus.
+ Under normal operation, the field ID output is set to logic 1 for an odd field
+ (field 1)and set to logic 0 for an even field (field 0).
+ 0 = Normal operation (default)
+ 1 = FID output polarity inverted
+
+For further reading of port node refer Documentation/devicetree/bindings/media/
+video-interfaces.txt.
+
+Example:
+
+ i2c0@...2000 {
+ ...
+ ...
+ tvp7002@5c {
+ compatible = "ti,tvp7002";
+ reg = <0x5c>;
+
+ port {
+ tvp7002_1: endpoint {
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ sync-on-green-active = <1>;
+ field-even-active = <0>;
+ };
+ };
+ };
+ ...
+ };
diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c
index f6b1f3f..24a08fa 100644
--- a/drivers/media/i2c/tvp7002.c
+++ b/drivers/media/i2c/tvp7002.c
@@ -35,6 +35,8 @@
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
+
#include "tvp7002_reg.h"
MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver");
@@ -943,6 +945,48 @@ static const struct v4l2_subdev_ops tvp7002_ops = {
.pad = &tvp7002_pad_ops,
};
+static struct tvp7002_config *
+tvp7002_get_pdata(struct i2c_client *client)
+{
+ struct v4l2_of_endpoint bus_cfg;
+ struct tvp7002_config *pdata;
+ struct device_node *endpoint;
+ unsigned int flags;
+
+ if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
+ return client->dev.platform_data;
+
+ endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
+ if (!endpoint)
+ return NULL;
+
+ pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ goto done;
+
+ v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+ flags = bus_cfg.bus.parallel.flags;
+
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+ pdata->hs_polarity = 1;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+ pdata->vs_polarity = 1;
+
+ if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+ pdata->clk_polarity = 1;
+
+ if (flags & V4L2_MBUS_FIELD_EVEN_HIGH)
+ pdata->fid_polarity = 1;
+
+ if (flags & V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH)
+ pdata->sog_polarity = 1;
+
+done:
+ of_node_put(endpoint);
+ return pdata;
+}
+
/*
* tvp7002_probe - Probe a TVP7002 device
* @c: ptr to i2c_client struct
@@ -954,32 +998,32 @@ static const struct v4l2_subdev_ops tvp7002_ops = {
*/
static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id)
{
+ struct tvp7002_config *pdata = tvp7002_get_pdata(c);
struct v4l2_subdev *sd;
struct tvp7002 *device;
struct v4l2_dv_timings timings;
int polarity_a;
int polarity_b;
u8 revision;
-
int error;
+ if (pdata == NULL) {
+ dev_err(&c->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(c->adapter,
I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -EIO;
- if (!c->dev.platform_data) {
- v4l_err(c, "No platform data!!\n");
- return -ENODEV;
- }
-
device = devm_kzalloc(&c->dev, sizeof(struct tvp7002), GFP_KERNEL);
if (!device)
return -ENOMEM;
sd = &device->sd;
- device->pdata = c->dev.platform_data;
+ device->pdata = pdata;
device->current_timings = tvp7002_timings;
/* Tell v4l2 the device is ready */
@@ -1084,9 +1128,18 @@ static const struct i2c_device_id tvp7002_id[] = {
};
MODULE_DEVICE_TABLE(i2c, tvp7002_id);
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id tvp7002_of_match[] = {
+ { .compatible = "ti,tvp7002", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, tvp7002_of_match);
+#endif
+
/* I2C driver data */
static struct i2c_driver tvp7002_driver = {
.driver = {
+ .of_match_table = of_match_ptr(tvp7002_of_match),
.owner = THIS_MODULE,
.name = TVP7002_MODULE_NAME,
},
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists