[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1374398247-11384-1-git-send-email-b38343@freescale.com>
Date: Sun, 21 Jul 2013 17:17:27 +0800
From: Robin Gong <b38343@...escale.com>
To: <broonie@...nel.org>, <shawn.guo@...aro.org>,
<grant.likely@...aro.org>, <rob.herring@...xeda.com>,
<rob@...dley.net>, <lgirdwood@...il.com>
CC: <devicetree-discuss@...ts.ozlabs.org>, <linux-doc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v4] regulator: pfuze100: add pfuze100 regulator driver
Add pfuze100 regulator driver.
Signed-off-by: Robin Gong <b38343@...escale.com>
---
.../devicetree/bindings/regulator/pfuze100.txt | 113 +++++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pfuze100-regulator.c | 462 ++++++++++++++++++++
include/linux/regulator/pfuze100.h | 44 ++
5 files changed, 627 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/pfuze100.txt
create mode 100644 drivers/regulator/pfuze100-regulator.c
create mode 100644 include/linux/regulator/pfuze100.h
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
new file mode 100644
index 0000000..22e1a48
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -0,0 +1,113 @@
+PFUZE100 family of regulators
+
+Required properties:
+- compatible: "fsl,pfuze100"
+- reg: I2C slave address
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Please refer to below doc
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+
+ The valid names for regulators are:
+ sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f1e6ad9..f913172 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -158,6 +158,13 @@ config REGULATOR_MC13892
Say y here to support the regulators found on the Freescale MC13892
PMIC.
+config REGULATOR_PFUZE100
+ tristate "Support regulators on Freescale PFUZE100 PMIC"
+ depends on I2C
+ help
+ Say y here to support the regulators found on the Freescale PFUZE100
+ PMIC.
+
config REGULATOR_ISL6271A
tristate "Intersil ISL6271A Power regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ba4a3cf..ad62524 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
new file mode 100644
index 0000000..fd259ef
--- /dev/null
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -0,0 +1,462 @@
+/*
+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/pfuze100.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+
+#define PFUZE_NUMREGS 128
+#define PFUZE100_VOL_OFFSET 0
+#define PFUZE100_STANDBY_OFFSET 1
+#define PFUZE100_MODE_OFFSET 3
+#define PFUZE100_CONF_OFFSET 4
+
+#define PFUZE100_DEVICEID 0x0
+#define PFUZE100_REVID 0x3
+#define PFUZE100_FABID 0x3
+
+#define PFUZE100_SW1ABVOL 0x20
+#define PFUZE100_SW1CVOL 0x2e
+#define PFUZE100_SW2VOL 0x35
+#define PFUZE100_SW3AVOL 0x3c
+#define PFUZE100_SW3BVOL 0x43
+#define PFUZE100_SW4VOL 0x4a
+#define PFUZE100_SWBSTCON1 0x66
+#define PFUZE100_VREFDDRCON 0x6a
+#define PFUZE100_VSNVSVOL 0x6b
+#define PFUZE100_VGEN1VOL 0x6c
+#define PFUZE100_VGEN2VOL 0x6d
+#define PFUZE100_VGEN3VOL 0x6e
+#define PFUZE100_VGEN4VOL 0x6f
+#define PFUZE100_VGEN5VOL 0x70
+#define PFUZE100_VGEN6VOL 0x71
+
+struct pfuze_regulator {
+ struct regulator_desc desc;
+ unsigned char stby_reg;
+ unsigned char stby_mask;
+};
+
+struct pfuze_chip {
+ struct regmap *regmap;
+ struct device *dev;
+ struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
+ struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR];
+};
+
+static const int pfuze100_swbst[] = {
+ 5000000, 5050000, 5100000, 5150000,
+};
+
+static const int pfuze100_vsnvs[] = {
+ 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
+};
+
+static const struct i2c_device_id pfuze_device_id[] = {
+ {.name = "pfuze100"},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
+
+static const struct of_device_id pfuze_dt_ids[] = {
+ { .compatible = "fsl,pfuze100" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
+
+static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+ struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
+ int id = rdev->desc->id;
+ unsigned int val, ramp_bits, reg;
+ int ret;
+
+ if (id < PFUZE100_SWBST) {
+ if (id == PFUZE100_SW1AB)
+ reg = PFUZE100_SW1ABVOL;
+ else
+ reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
+ regmap_read(pfuze100->regmap, reg, &val);
+
+ if (id <= PFUZE100_SW1C)
+ ramp_delay = 25000 / (2 * ramp_delay);
+ else if (val & 0x40)
+ ramp_delay = 50000 / (4 * ramp_delay);
+ else
+ ramp_delay = 25000 / (2 * ramp_delay);
+
+ ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
+ ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
+ ramp_bits << 6);
+ if (ret < 0)
+ dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
+ } else
+ ret = -EACCES;
+
+ return ret;
+}
+
+static struct regulator_ops pfuze100_ldo_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_ops pfuze100_fixed_regulator_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops pfuze100_sw_regulator_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = pfuze100_set_ramp_delay,
+};
+
+static struct regulator_ops pfuze100_swb_regulator_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+
+};
+
+#define PFUZE100_FIXED_REG(_name, base, voltage) \
+{ \
+ [PFUZE100_ ## _name] = { \
+ .desc = { \
+ .name = #_name, \
+ .n_voltages = 1, \
+ .ops = &pfuze100_fixed_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PFUZE100_ ## _name, \
+ .owner = THIS_MODULE, \
+ .min_uV = (voltage), \
+ .enable_reg = (base), \
+ .enable_mask = 0x10, \
+ }, \
+ } \
+}
+
+#define PFUZE100_SW_REG(_name, base, min, max, step) \
+{ \
+ [PFUZE100_ ## _name] = { \
+ .desc = { \
+ .name = #_name,\
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &pfuze100_sw_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PFUZE100_ ## _name, \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
+ .vsel_mask = 0x3f, \
+ }, \
+ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
+ .stby_mask = 0x3f, \
+ } \
+}
+
+#define PFUZE100_SWB_REG(_name, base, mask, voltages) \
+{ \
+ [PFUZE100_ ## _name] = { \
+ .desc = { \
+ .name = #_name, \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pfuze100_swb_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PFUZE100_ ## _name, \
+ .owner = THIS_MODULE, \
+ .volt_table = voltages, \
+ .vsel_reg = (base), \
+ .vsel_mask = (mask), \
+ }, \
+ } \
+}
+
+#define PFUZE100_VGEN_REG(_name, base, min, max, step) \
+{ \
+ [PFUZE100_ ## _name] = { \
+ .desc = { \
+ .name = #_name, \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &pfuze100_ldo_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PFUZE100_ ## _name, \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (base), \
+ .vsel_mask = 0xf, \
+ .enable_reg = (base), \
+ .enable_mask = 0x10, \
+ }, \
+ .stby_reg = (base), \
+ .stby_mask = 0x20, \
+ } \
+}
+
+static struct pfuze_regulator pfuze100_regulators[] = {
+ PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
+ PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
+ PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
+ PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
+ PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
+ PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
+ PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
+ PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
+ PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000),
+ PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
+ PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
+ PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
+};
+
+#ifdef CONFIG_OF
+static struct of_regulator_match pfuze100_matches[] = {
+ { .name = "sw1ab", },
+ { .name = "sw1c", },
+ { .name = "sw2", },
+ { .name = "sw3a", },
+ { .name = "sw3b", },
+ { .name = "sw4", },
+ { .name = "swbst", },
+ { .name = "vsnvs", },
+ { .name = "vrefddr", },
+ { .name = "vgen1", },
+ { .name = "vgen2", },
+ { .name = "vgen3", },
+ { .name = "vgen4", },
+ { .name = "vgen5", },
+ { .name = "vgen6", },
+};
+
+static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+{
+ struct device *dev = chip->dev;
+ struct device_node *parent;
+ int ret;
+
+ of_node_get(dev->parent->of_node);
+ parent = of_find_node_by_name(dev->parent->of_node, "regulators");
+ if (!parent) {
+ dev_err(dev, "regulators node not found\n");
+ return -EINVAL;
+ }
+
+ ret = of_regulator_match(dev, parent, pfuze100_matches,
+ ARRAY_SIZE(pfuze100_matches));
+
+ of_node_put(dev->parent->of_node);
+ if (ret < 0) {
+ dev_err(dev, "Error parsing regulator init data: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static inline struct regulator_init_data *match_init_data(int index)
+{
+ return pfuze100_matches[index].init_data;
+}
+
+static inline struct device_node *match_of_node(int index)
+{
+ return pfuze100_matches[index].of_node;
+}
+#else
+static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+{
+ return NULL;
+}
+
+static inline struct regulator_init_data *match_init_data(int index)
+{
+ return NULL;
+}
+
+static inline struct device_node *match_of_node(int index)
+{
+ return NULL;
+}
+#endif
+
+static int pfuze_identify(struct pfuze_chip *pfuze_chip)
+{
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value);
+ if (ret)
+ return ret;
+
+ if (value & 0x0f) {
+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
+ return -ENODEV;
+ }
+
+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
+ if (ret)
+ return ret;
+ dev_info(pfuze_chip->dev,
+ "Full lay: %x, Metal lay: %x\n",
+ (value & 0xf0) >> 4, value & 0x0f);
+
+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
+ if (ret)
+ return ret;
+ dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n",
+ (value & 0xc) >> 2, value & 0x3);
+
+ return 0;
+}
+
+static struct regmap_config pfuze_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = PFUZE_NUMREGS,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int pfuze100_regulator_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pfuze_chip *pfuze_chip;
+ struct pfuze_regulator_platform_data *pdata =
+ dev_get_platdata(&client->dev);
+ struct regulator_config config = { };
+ int i, ret;
+
+ pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
+ GFP_KERNEL);
+ if (!pfuze_chip)
+ return -ENOMEM;
+
+ dev_set_drvdata(&client->dev, pfuze_chip);
+
+ memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
+ sizeof(pfuze_chip->regulator_descs));
+
+ pfuze_chip->dev = &client->dev;
+
+ pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config);
+ if (IS_ERR(pfuze_chip->regmap)) {
+ ret = PTR_ERR(pfuze_chip->regmap);
+ dev_err(&client->dev,
+ "regmap allocation failed with err %d\n", ret);
+ return ret;
+ }
+
+ ret = pfuze_identify(pfuze_chip);
+ if (ret) {
+ dev_err(&client->dev, "unrecognized pfuze chip ID!\n");
+ return ret;
+ }
+
+ ret = pfuze_parse_regulators_dt(pfuze_chip);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
+ struct regulator_init_data *init_data;
+ int val;
+
+ if (pdata)
+ init_data = pdata->init_data[i];
+ else
+ init_data = match_init_data(i);
+
+ /* SW2~SW4 high bit check and modify the voltage value table */
+ if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
+ regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL +
+ (i - PFUZE100_SW2) * 7, &val);
+ if (val & 0x40) {
+ pfuze_chip->regulator_descs[i].desc.min_uV
+ = 800000;
+ pfuze_chip->regulator_descs[i].desc.uV_step
+ = 50000;
+ }
+ }
+
+ config.dev = &client->dev;
+ config.init_data = init_data;
+ config.driver_data = pfuze_chip;
+ config.of_node = match_of_node(i);
+
+ pfuze_chip->regulators[i] = regulator_register(&pfuze_chip
+ ->regulator_descs[i].desc, &config);
+ if (IS_ERR(pfuze_chip->regulators[i])) {
+ dev_err(&client->dev, "register regulator%s failed\n",
+ pfuze100_regulators[i].desc.name);
+ ret = PTR_ERR(pfuze_chip->regulators[i]);
+ while (--i >= 0)
+ regulator_unregister(pfuze_chip->regulators[i]);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int pfuze100_regulator_remove(struct i2c_client *client)
+{
+ int i;
+ struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev);
+
+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
+ regulator_unregister(pfuze_chip->regulators[i]);
+
+ devm_kfree(&client->dev, pfuze_chip);
+
+ return 0;
+}
+
+static struct i2c_driver pfuze_driver = {
+ .id_table = pfuze_device_id,
+ .driver = {
+ .name = "pfuze100-regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = pfuze_dt_ids,
+ },
+ .probe = pfuze100_regulator_probe,
+ .remove = pfuze100_regulator_remove,
+};
+module_i2c_driver(pfuze_driver);
+
+MODULE_AUTHOR("Robin Gong <b38343@...escale.com>");
+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
+MODULE_ALIAS("pfuze100-regulator");
diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
new file mode 100644
index 0000000..65d550b
--- /dev/null
+++ b/include/linux/regulator/pfuze100.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __LINUX_REG_PFUZE100_H
+#define __LINUX_REG_PFUZE100_H
+
+#define PFUZE100_SW1AB 0
+#define PFUZE100_SW1C 1
+#define PFUZE100_SW2 2
+#define PFUZE100_SW3A 3
+#define PFUZE100_SW3B 4
+#define PFUZE100_SW4 5
+#define PFUZE100_SWBST 6
+#define PFUZE100_VSNVS 7
+#define PFUZE100_VREFDDR 8
+#define PFUZE100_VGEN1 9
+#define PFUZE100_VGEN2 10
+#define PFUZE100_VGEN3 11
+#define PFUZE100_VGEN4 12
+#define PFUZE100_VGEN5 13
+#define PFUZE100_VGEN6 14
+#define PFUZE100_MAX_REGULATOR 15
+
+struct regulator_init_data;
+
+struct pfuze_regulator_platform_data {
+ struct regulator_init_data *init_data[PFUZE100_MAX_REGULATOR];
+};
+
+#endif /* __LINUX_REG_PFUZE100_H */
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists