| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130722091058.GI20271@S2101-09.ap.freescale.net>
Date: Mon, 22 Jul 2013 17:11:00 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: Robin Gong <b38343@...escale.com>
CC: <broonie@...nel.org>, <grant.likely@...aro.org>,
<rob.herring@...xeda.com>, <rob@...dley.net>,
<lgirdwood@...il.com>, <devicetree-discuss@...ts.ozlabs.org>,
<linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4] regulator: pfuze100: add pfuze100 regulator driver
On Sun, Jul 21, 2013 at 05:17:27PM +0800, Robin Gong wrote:
> Add pfuze100 regulator driver.
>
> Signed-off-by: Robin Gong <b38343@...escale.com>
> ---
> .../devicetree/bindings/regulator/pfuze100.txt | 113 +++++
> drivers/regulator/Kconfig | 7 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/pfuze100-regulator.c | 462 ++++++++++++++++++++
> include/linux/regulator/pfuze100.h | 44 ++
> 5 files changed, 627 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/regulator/pfuze100.txt
> create mode 100644 drivers/regulator/pfuze100-regulator.c
> create mode 100644 include/linux/regulator/pfuze100.h
>
> diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
> new file mode 100644
> index 0000000..22e1a48
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
> @@ -0,0 +1,113 @@
> +PFUZE100 family of regulators
> +
> +Required properties:
> +- compatible: "fsl,pfuze100"
> +- reg: I2C slave address
> +- regulators: This is the list of child nodes that specify the regulator
> + initialization data for defined regulators. Please refer to below doc
> + Documentation/devicetree/bindings/regulator/regulator.txt.
"regulators" is not a property but a sub-node.
> +
> + The valid names for regulators are:
> + sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
> +
> +Each regulator is defined using the standard binding for regulators.
> +
> +Example:
> +
> + pmic: pfuze100@08 {
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3a {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3b_reg: sw3b {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index f1e6ad9..f913172 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -158,6 +158,13 @@ config REGULATOR_MC13892
> Say y here to support the regulators found on the Freescale MC13892
> PMIC.
>
> +config REGULATOR_PFUZE100
> + tristate "Support regulators on Freescale PFUZE100 PMIC"
> + depends on I2C
> + help
> + Say y here to support the regulators found on the Freescale PFUZE100
> + PMIC.
> +
> config REGULATOR_ISL6271A
> tristate "Intersil ISL6271A Power regulator"
> depends on I2C
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index ba4a3cf..ad62524 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
> obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
> obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
> obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
> +obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
> obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
> obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
> obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
> diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
> new file mode 100644
> index 0000000..fd259ef
> --- /dev/null
> +++ b/drivers/regulator/pfuze100-regulator.c
> @@ -0,0 +1,462 @@
> +/*
> + * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/of_regulator.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/pfuze100.h>
> +#include <linux/i2c.h>
> +#include <linux/slab.h>
> +#include <linux/regmap.h>
> +
> +
One blank line.
> +#define PFUZE_NUMREGS 128
> +#define PFUZE100_VOL_OFFSET 0
> +#define PFUZE100_STANDBY_OFFSET 1
> +#define PFUZE100_MODE_OFFSET 3
> +#define PFUZE100_CONF_OFFSET 4
> +
> +#define PFUZE100_DEVICEID 0x0
> +#define PFUZE100_REVID 0x3
> +#define PFUZE100_FABID 0x3
> +
> +#define PFUZE100_SW1ABVOL 0x20
> +#define PFUZE100_SW1CVOL 0x2e
> +#define PFUZE100_SW2VOL 0x35
> +#define PFUZE100_SW3AVOL 0x3c
> +#define PFUZE100_SW3BVOL 0x43
> +#define PFUZE100_SW4VOL 0x4a
> +#define PFUZE100_SWBSTCON1 0x66
> +#define PFUZE100_VREFDDRCON 0x6a
> +#define PFUZE100_VSNVSVOL 0x6b
> +#define PFUZE100_VGEN1VOL 0x6c
> +#define PFUZE100_VGEN2VOL 0x6d
> +#define PFUZE100_VGEN3VOL 0x6e
> +#define PFUZE100_VGEN4VOL 0x6f
> +#define PFUZE100_VGEN5VOL 0x70
> +#define PFUZE100_VGEN6VOL 0x71
> +
> +struct pfuze_regulator {
> + struct regulator_desc desc;
> + unsigned char stby_reg;
> + unsigned char stby_mask;
> +};
> +
> +struct pfuze_chip {
> + struct regmap *regmap;
> + struct device *dev;
> + struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
> + struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR];
> +};
> +
> +static const int pfuze100_swbst[] = {
> + 5000000, 5050000, 5100000, 5150000,
> +};
> +
> +static const int pfuze100_vsnvs[] = {
> + 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
> +};
> +
> +static const struct i2c_device_id pfuze_device_id[] = {
> + {.name = "pfuze100"},
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
> +
> +static const struct of_device_id pfuze_dt_ids[] = {
> + { .compatible = "fsl,pfuze100" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
> +
> +static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
> +{
> + struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
> + int id = rdev->desc->id;
> + unsigned int val, ramp_bits, reg;
> + int ret;
> +
> + if (id < PFUZE100_SWBST) {
> + if (id == PFUZE100_SW1AB)
> + reg = PFUZE100_SW1ABVOL;
> + else
> + reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
> + regmap_read(pfuze100->regmap, reg, &val);
> +
> + if (id <= PFUZE100_SW1C)
> + ramp_delay = 25000 / (2 * ramp_delay);
> + else if (val & 0x40)
> + ramp_delay = 50000 / (4 * ramp_delay);
> + else
> + ramp_delay = 25000 / (2 * ramp_delay);
> +
> + ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
> + ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
> + ramp_bits << 6);
> + if (ret < 0)
> + dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
> + } else
> + ret = -EACCES;
> +
> + return ret;
> +}
> +
> +static struct regulator_ops pfuze100_ldo_regulator_ops = {
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .list_voltage = regulator_list_voltage_linear,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> +};
> +
> +static struct regulator_ops pfuze100_fixed_regulator_ops = {
> + .list_voltage = regulator_list_voltage_linear,
> +};
> +
> +static struct regulator_ops pfuze100_sw_regulator_ops = {
> + .list_voltage = regulator_list_voltage_linear,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_time_sel = regulator_set_voltage_time_sel,
> + .set_ramp_delay = pfuze100_set_ramp_delay,
> +};
> +
> +static struct regulator_ops pfuze100_swb_regulator_ops = {
> + .list_voltage = regulator_list_voltage_table,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> +
> +};
> +
> +#define PFUZE100_FIXED_REG(_name, base, voltage) \
> +{ \
> + [PFUZE100_ ## _name] = { \
> + .desc = { \
> + .name = #_name, \
> + .n_voltages = 1, \
> + .ops = &pfuze100_fixed_regulator_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = PFUZE100_ ## _name, \
> + .owner = THIS_MODULE, \
> + .min_uV = (voltage), \
> + .enable_reg = (base), \
> + .enable_mask = 0x10, \
> + }, \
> + } \
> +}
> +
> +#define PFUZE100_SW_REG(_name, base, min, max, step) \
> +{ \
> + [PFUZE100_ ## _name] = { \
> + .desc = { \
> + .name = #_name,\
> + .n_voltages = ((max) - (min)) / (step) + 1, \
> + .ops = &pfuze100_sw_regulator_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = PFUZE100_ ## _name, \
> + .owner = THIS_MODULE, \
> + .min_uV = (min), \
> + .uV_step = (step), \
> + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
> + .vsel_mask = 0x3f, \
> + }, \
> + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
> + .stby_mask = 0x3f, \
> + } \
> +}
> +
> +#define PFUZE100_SWB_REG(_name, base, mask, voltages) \
> +{ \
> + [PFUZE100_ ## _name] = { \
> + .desc = { \
> + .name = #_name, \
> + .n_voltages = ARRAY_SIZE(voltages), \
> + .ops = &pfuze100_swb_regulator_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = PFUZE100_ ## _name, \
> + .owner = THIS_MODULE, \
> + .volt_table = voltages, \
> + .vsel_reg = (base), \
> + .vsel_mask = (mask), \
> + }, \
> + } \
> +}
> +
> +#define PFUZE100_VGEN_REG(_name, base, min, max, step) \
> +{ \
> + [PFUZE100_ ## _name] = { \
> + .desc = { \
> + .name = #_name, \
> + .n_voltages = ((max) - (min)) / (step) + 1, \
> + .ops = &pfuze100_ldo_regulator_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = PFUZE100_ ## _name, \
> + .owner = THIS_MODULE, \
> + .min_uV = (min), \
> + .uV_step = (step), \
> + .vsel_reg = (base), \
> + .vsel_mask = 0xf, \
> + .enable_reg = (base), \
> + .enable_mask = 0x10, \
> + }, \
> + .stby_reg = (base), \
> + .stby_mask = 0x20, \
> + } \
> +}
> +
> +static struct pfuze_regulator pfuze100_regulators[] = {
> + PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
> + PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
> + PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
> + PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
> + PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
> + PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
> + PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
> + PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
> + PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000),
> + PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
> + PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
> + PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
> + PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
> + PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
> + PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
> +};
> +
> +#ifdef CONFIG_OF
> +static struct of_regulator_match pfuze100_matches[] = {
> + { .name = "sw1ab", },
> + { .name = "sw1c", },
> + { .name = "sw2", },
> + { .name = "sw3a", },
> + { .name = "sw3b", },
> + { .name = "sw4", },
> + { .name = "swbst", },
> + { .name = "vsnvs", },
> + { .name = "vrefddr", },
> + { .name = "vgen1", },
> + { .name = "vgen2", },
> + { .name = "vgen3", },
> + { .name = "vgen4", },
> + { .name = "vgen5", },
> + { .name = "vgen6", },
> +};
> +
> +static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
> +{
> + struct device *dev = chip->dev;
> + struct device_node *parent;
> + int ret;
> +
> + of_node_get(dev->parent->of_node);
> + parent = of_find_node_by_name(dev->parent->of_node, "regulators");
> + if (!parent) {
> + dev_err(dev, "regulators node not found\n");
> + return -EINVAL;
So you leave dev->parent->of_node unbalanced.
> + }
> +
> + ret = of_regulator_match(dev, parent, pfuze100_matches,
> + ARRAY_SIZE(pfuze100_matches));
> +
> + of_node_put(dev->parent->of_node);
This could be move before of_regulator_match(), right?
> + if (ret < 0) {
> + dev_err(dev, "Error parsing regulator init data: %d\n",
> + ret);
> + return ret;
> + }
> +
The kernel doc of function of_find_node_by_name() suggests you need a
of_node_put() call to put the node you get from there.
> + return 0;
> +}
> +
> +static inline struct regulator_init_data *match_init_data(int index)
> +{
> + return pfuze100_matches[index].init_data;
> +}
> +
> +static inline struct device_node *match_of_node(int index)
> +{
> + return pfuze100_matches[index].of_node;
> +}
> +#else
> +static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
> +{
> + return NULL;
> +}
> +
> +static inline struct regulator_init_data *match_init_data(int index)
> +{
> + return NULL;
> +}
> +
> +static inline struct device_node *match_of_node(int index)
> +{
> + return NULL;
> +}
> +#endif
> +
> +static int pfuze_identify(struct pfuze_chip *pfuze_chip)
> +{
> + unsigned int value;
> + int ret;
> +
> + ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value);
> + if (ret)
> + return ret;
> +
> + if (value & 0x0f) {
> + dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
> + return -ENODEV;
> + }
> +
> + ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
> + if (ret)
> + return ret;
> + dev_info(pfuze_chip->dev,
> + "Full lay: %x, Metal lay: %x\n",
> + (value & 0xf0) >> 4, value & 0x0f);
> +
> + ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
> + if (ret)
> + return ret;
> + dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n",
> + (value & 0xc) >> 2, value & 0x3);
> +
> + return 0;
> +}
> +
> +static struct regmap_config pfuze_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = PFUZE_NUMREGS,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int pfuze100_regulator_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct pfuze_chip *pfuze_chip;
> + struct pfuze_regulator_platform_data *pdata =
> + dev_get_platdata(&client->dev);
> + struct regulator_config config = { };
> + int i, ret;
> +
> + pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
> + GFP_KERNEL);
> + if (!pfuze_chip)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&client->dev, pfuze_chip);
> +
> + memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
> + sizeof(pfuze_chip->regulator_descs));
> +
> + pfuze_chip->dev = &client->dev;
> +
> + pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config);
> + if (IS_ERR(pfuze_chip->regmap)) {
> + ret = PTR_ERR(pfuze_chip->regmap);
> + dev_err(&client->dev,
> + "regmap allocation failed with err %d\n", ret);
> + return ret;
> + }
> +
> + ret = pfuze_identify(pfuze_chip);
> + if (ret) {
> + dev_err(&client->dev, "unrecognized pfuze chip ID!\n");
> + return ret;
> + }
> +
> + ret = pfuze_parse_regulators_dt(pfuze_chip);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
> + struct regulator_init_data *init_data;
> + int val;
> +
> + if (pdata)
> + init_data = pdata->init_data[i];
> + else
> + init_data = match_init_data(i);
> +
> + /* SW2~SW4 high bit check and modify the voltage value table */
> + if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
> + regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL +
> + (i - PFUZE100_SW2) * 7, &val);
> + if (val & 0x40) {
> + pfuze_chip->regulator_descs[i].desc.min_uV
> + = 800000;
> + pfuze_chip->regulator_descs[i].desc.uV_step
> + = 50000;
> + }
> + }
> +
> + config.dev = &client->dev;
> + config.init_data = init_data;
> + config.driver_data = pfuze_chip;
> + config.of_node = match_of_node(i);
> +
> + pfuze_chip->regulators[i] = regulator_register(&pfuze_chip
> + ->regulator_descs[i].desc, &config);
> + if (IS_ERR(pfuze_chip->regulators[i])) {
> + dev_err(&client->dev, "register regulator%s failed\n",
> + pfuze100_regulators[i].desc.name);
> + ret = PTR_ERR(pfuze_chip->regulators[i]);
> + while (--i >= 0)
> + regulator_unregister(pfuze_chip->regulators[i]);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int pfuze100_regulator_remove(struct i2c_client *client)
> +{
> + int i;
> + struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev);
> +
> + for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
> + regulator_unregister(pfuze_chip->regulators[i]);
> +
> + devm_kfree(&client->dev, pfuze_chip);
This is not needed.
Shawn
> +
> + return 0;
> +}
> +
> +static struct i2c_driver pfuze_driver = {
> + .id_table = pfuze_device_id,
> + .driver = {
> + .name = "pfuze100-regulator",
> + .owner = THIS_MODULE,
> + .of_match_table = pfuze_dt_ids,
> + },
> + .probe = pfuze100_regulator_probe,
> + .remove = pfuze100_regulator_remove,
> +};
> +module_i2c_driver(pfuze_driver);
> +
> +MODULE_AUTHOR("Robin Gong <b38343@...escale.com>");
> +MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
> +MODULE_ALIAS("pfuze100-regulator");
> diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
> new file mode 100644
> index 0000000..65d550b
> --- /dev/null
> +++ b/include/linux/regulator/pfuze100.h
> @@ -0,0 +1,44 @@
> +/*
> + * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + */
> +#ifndef __LINUX_REG_PFUZE100_H
> +#define __LINUX_REG_PFUZE100_H
> +
> +#define PFUZE100_SW1AB 0
> +#define PFUZE100_SW1C 1
> +#define PFUZE100_SW2 2
> +#define PFUZE100_SW3A 3
> +#define PFUZE100_SW3B 4
> +#define PFUZE100_SW4 5
> +#define PFUZE100_SWBST 6
> +#define PFUZE100_VSNVS 7
> +#define PFUZE100_VREFDDR 8
> +#define PFUZE100_VGEN1 9
> +#define PFUZE100_VGEN2 10
> +#define PFUZE100_VGEN3 11
> +#define PFUZE100_VGEN4 12
> +#define PFUZE100_VGEN5 13
> +#define PFUZE100_VGEN6 14
> +#define PFUZE100_MAX_REGULATOR 15
> +
> +struct regulator_init_data;
> +
> +struct pfuze_regulator_platform_data {
> + struct regulator_init_data *init_data[PFUZE100_MAX_REGULATOR];
> +};
> +
> +#endif /* __LINUX_REG_PFUZE100_H */
> --
> 1.7.5.4
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists