linux-kernel - Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 26 Jul 2013 12:13:42 +0200
From:	"Arend van Spriel" <arend@...adcom.com>
To:	"Joel Fernandes" <joelf@...com>
cc:	"Roger Quadros" <rogerq@...com>, tony@...mide.com,
	linux-omap@...r.kernel.org,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: Regression 3.11-rc1: omap4panda: no usb and consequently no
 ethernet

On 07/26/2013 05:00 AM, Joel Fernandes wrote:
> On 07/25/2013 09:49 PM, Joel Fernandes wrote:
>
> [..]
>
>>> Can I get back on this topic. When USB and ethernet was working for me
>>> as stated above, I was not doing tftpboot. When I use tftpboot the
>>> images are obtained from the tftp server, but after kernel has started
>>> there is nothing in /sys/bus/usb/devices/.
>>
>> I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on omap4-panda-es
>> and enabled following USB options:
>>
>> CONFIG_USB_MUSB_HDRC=y
>> CONFIG_USB_PHY=y
>> CONFIG_OMAP_USB2=y
>> CONFIG_OMAP_CONTROL_USB=y
>> CONFIG_USB_MUSB_OMAP2PLUS=y
>> CONFIG_MFD_OMAP_USB_HOST=y
>> CONFIG_USB_EHCI_HCD=y
>> CONFIG_USB_OHCI_HCD=y
>> CONFIG_USB_EHCI_HCD_OMAP=y
>
> Sorry I missed saying I also set had to set CONFIG_NOP_USB_XCEIV=y

Here are the results of the dutch jury ;-)

[    2.537109] HS USB OTG: no transceiver configured
[    2.542541] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed 
with status -517
[    2.542541] platform musb-hdrc.0.auto: Driver musb-hdrc requests 
probe deferral

I am surely missing something here. Either in device tree or .config.

Regards,
Arend

View attachment "panda-config" of type "text/plain" (80528 bytes)

View attachment "panda.log" of type "text/plain" (15311 bytes)