[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1375195664.11289.1.camel@phoenix>
Date: Tue, 30 Jul 2013 22:47:44 +0800
From: Axel Lin <axel.lin@...ics.com>
To: Mark Brown <broonie@...nel.org>
Cc: Robin Gong <b38343@...escale.com>,
Liam Girdwood <lgirdwood@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH] regulator: pfuze100: Simplify pfuze100_set_ramp_delay
implementation
Simplify the equation to calculate ramp_delay.
Below equations are equivalent:
ramp_delay = 25000 / (2 * ramp_delay);
ramp_delay = 50000 / (4 * ramp_delay);
ramp_delay = 25000 / (2 * ramp_delay);
ramp_delay = 12500 / ramp_delay;
So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different
equations.
Also use rdev->desc->vsel_reg instead of run-time calculate register address.
Signed-off-by: Axel Lin <axel.lin@...ics.com>
---
drivers/regulator/pfuze100-regulator.c | 21 +++++----------------
1 file changed, 5 insertions(+), 16 deletions(-)
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index e02d9b9..bda5561 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -93,26 +93,15 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
int id = rdev->desc->id;
- unsigned int val, ramp_bits, reg;
+ unsigned int ramp_bits;
int ret;
if (id < PFUZE100_SWBST) {
- if (id == PFUZE100_SW1AB)
- reg = PFUZE100_SW1ABVOL;
- else
- reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
- regmap_read(pfuze100->regmap, reg, &val);
-
- if (id <= PFUZE100_SW1C)
- ramp_delay = 25000 / (2 * ramp_delay);
- else if (val & 0x40)
- ramp_delay = 50000 / (4 * ramp_delay);
- else
- ramp_delay = 25000 / (2 * ramp_delay);
-
+ ramp_delay = 12500 / ramp_delay;
ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
- ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
- ramp_bits << 6);
+ ret = regmap_update_bits(pfuze100->regmap,
+ rdev->desc->vsel_reg + 4,
+ 0xc0, ramp_bits << 6);
if (ret < 0)
dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
} else
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists