| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130812204402.GA24556@lukather>
Date: Mon, 12 Aug 2013 22:44:02 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Mark Rutland <mark.rutland@....com>
Cc: Mike Turquette <mturquette@...aro.org>,
Emilio Lopez <emilio@...pez.com.ar>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-sunxi@...glegroups.com" <linux-sunxi@...glegroups.com>,
"kevin.z.m.zh@...il.com" <kevin.z.m.zh@...il.com>,
"sunny@...winnertech.com" <sunny@...winnertech.com>,
"shuge@...winnertech.com" <shuge@...winnertech.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, devicetree@...r.kernel.org
Subject: Re: [PATCHv3 3/4] clk: sunxi: Add A31 clocks support
Hi Mark,
On Mon, Aug 12, 2013 at 03:14:10PM +0100, Mark Rutland wrote:
> [Adding devicetree list to Cc]
>
> Hi,
>
> On Mon, Aug 05, 2013 at 09:43:00PM +0100, Maxime Ripard wrote:
> > The A31 has a mostly different clock set compared to the other older
> > SoCs currently supported in the Allwinner clock driver.
> >
> > Add support for the basic useful clocks. The other ones will come in
> > eventually.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
> > ---
> > Documentation/devicetree/bindings/clock/sunxi.txt | 6 +
> > .../bindings/clock/sunxi/sun6i-a31-gates.txt | 83 ++++++++++++++
> > drivers/clk/sunxi/clk-sunxi.c | 124 +++++++++++++++++++++
> > 3 files changed, 213 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
> >
> > diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> > index b24de10..c383d12 100644
> > --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> > +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> > @@ -8,6 +8,7 @@ Required properties:
> > - compatible : shall be one of the following:
> > "allwinner,sun4i-osc-clk" - for a gatable oscillator
> > "allwinner,sun4i-pll1-clk" - for the main PLL clock
> > + "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
> > "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
> > "allwinner,sun4i-axi-clk" - for the AXI clock
> > "allwinner,sun4i-axi-gates-clk" - for the AXI gates
> > @@ -15,6 +16,8 @@ Required properties:
> > "allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
> > "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
> > "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
> > + "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
> > + "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
> > "allwinner,sun4i-apb0-clk" - for the APB0 clock
> > "allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
> > "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
> > @@ -24,6 +27,9 @@ Required properties:
> > "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
> > "allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
> > "allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
> > + "allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
> > + "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
> > + "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
> >
> > Required properties for all clocks:
> > - reg : shall be the control register address for the clock.
>
> This looks sensible, but I have a couple of questions below:
>
> > diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
> > new file mode 100644
> > index 0000000..fe44932
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
> > @@ -0,0 +1,83 @@
> > +Gate clock outputs
> > +------------------
> > +
> > + * AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
> > +
> > + MIPI DSI 1
> > +
> > + SS 5
> > + DMA 6
> > +
> > + MMC0 8
> > + MMC1 9
> > + MMC2 10
> > + MMC3 11
> > +
> > + NAND1 12
> > + NAND0 13
> > + SDRAM 14
> > +
> > + GMAC 17
> > + TS 18
> > + HSTIMER 19
> > + SPI0 20
> > + SPI1 21
> > + SPI2 22
> > + SPI3 23
> > + USB_OTG 24
> > +
> > + EHCI0 26
> > + EHCI1 27
> > +
> > + OHCI0 29
> > + OHCI1 30
> > + OHCI2 31
> > + VE 32
> > +
> > + LCD0 36
> > + LCD1 37
> > +
> > + CSI 40
> > +
> > + HDMI 43
> > + DE_BE0 44
> > + DE_BE1 45
> > + DE_FE1 46
> > + DE_FE1 47
> > +
> > + MP 50
> > +
> > + GPU 52
> > +
> > + DEU0 55
> > + DEU1 56
> > + DRC0 57
> > + DRC1 58
> > +
> > + * APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
> > +
> > + CODEC 0
> > +
> > + DIGITAL MIC 4
> > + PIO 5
> > +
> > + DAUDIO0 12
> > + DAUDIO1 13
> > +
> > + * APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
> > +
> > + I2C0 0
> > + I2C1 1
> > + I2C2 2
> > + I2C3 3
> > +
> > + UART0 16
> > + UART1 17
> > + UART2 18
> > + UART3 19
> > + UART4 20
> > + UART5 21
> > +
>
> Are those the specific names of the clock outputs, or just what they're
> wired to on the A31? I noticed the a13 gate bindings mentioned a clock
> called MALI400, which seemed awfully specific, but I don't have a
> datasheet handy.
It's what it's wired to on the A31, and more generally on all of the
Allwinner SoCs, since it's what we've been using on the other SoCs as
well.
> Does the binding cover all clocks (even if the driver doesn't yet
> support them)? Is there any reason we can't document those clock names
> and associated IDs in the binding now even if we can't yet drive them?
No, it covers only the clocks that are a gated output of the clocks
listed here. Some IPs might require additional clocks that are not
implemented yet (such as USB), that we didn't document yet, because we
added no support.
But every clock listed in that document is actually working and
supported, and the documentation should cover all the gates supported by
the A31 for the clocks implemented (given that the documentation is
accurate).
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)
Powered by blists - more mailing lists