lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <0181ACFD-4F25-493C-9143-E197C53282DF@codeaurora.org>
Date:	Fri, 16 Aug 2013 11:43:36 -0500
From:	Kumar Gala <galak@...eaurora.org>
To:	Mike Turquette <mturquette@...aro.org>
Cc:	Stephen Boyd <sboyd@...eaurora.org>, linux-arm-msm@...r.kernel.org,
	Saravana Kannan <skannan@...eaurora.org>,
	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v1 03/14] clk: Add of_clk_match() for device drivers


On Aug 15, 2013, at 12:02 AM, Mike Turquette wrote:

>> Right now we have
>> 
>>        pll8: pll8 {
>>                #clock-cells = <0>;
>>                compatible = "qcom,pll";
>>                clocks = <&pxo>;
>>        };
>> 
>> in DT and
>> 
>>        static struct pll_desc pll8_desc = {
>>                .l_reg = 0x3144,
>>                .m_reg = 0x3148,
>>                .n_reg = 0x314c,
>>                .config_reg = 0x3154,
>>                .mode_reg = 0x3140,
>>                .status_reg = 0x3158,
>>                .status_bit = 16,
>>        };
>> 
>> in C. Do you want everything to be in DT? Something like:
>> 
>>        pll8: pll8@...0 {
>>                #clock-cells = <0>;
>>                compatible = "qcom,pll";
>>                clocks = <&pxo>;
>>                reg = <0x3140 0x20>;
>>        };
>> 
>> and then assume that all those registers are offset from the base
>> register and that the status bit is 16 (it usually is but not
>> always)?

I think its reasonable to put the various regs associated with a clock in the .dts like the example you show, but we should be going down to bit level details.  If we think of each clock as its own device its reasonable that the clock would have some set of registers associated with it.

-k

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ