[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <000101ce9ef8$024f1be0$06ed53a0$%han@samsung.com>
Date: Thu, 22 Aug 2013 14:25:26 +0900
From: Jingoo Han <jg1.han@...sung.com>
To: 'Sachin Kamat' <sachin.kamat@...aro.org>
Cc: 'Bjorn Helgaas' <bhelgaas@...gle.com>, linux-pci@...r.kernel.org,
linux-samsung-soc@...r.kernel.org,
'Kukjin Kim' <kgene.kim@...sung.com>,
'Pratyush Anand' <pratyush.anand@...com>,
'Mohit KUMAR' <Mohit.KUMAR@...com>,
'Siva Reddy Kallam' <siva.kallam@...sung.com>,
'SRIKANTH TUMKUR SHIVANAND' <ts.srikanth@...sung.com>,
'Arnd Bergmann' <arnd@...db.de>,
'Sean Cross' <xobs@...agi.com>,
'Kishon Vijay Abraham I' <kishon@...com>,
'Thierry Reding' <thierry.reding@...il.com>,
'Thomas Petazzoni' <thomas.petazzoni@...e-electrons.com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
'Jingoo Han' <jg1.han@...sung.com>
Subject: Re: [PATCH] PCI: exynos: add support for MSI
On Monday, August 12, 2013 6:13 PM, Sachin Kamat wrote:
> On 12 August 2013 14:26, Jingoo Han <jg1.han@...sung.com> wrote:
> > This patch adds support for Message Signaled Interrupt in the
> > Exynops PCIe diver using Synopsys designware PCIe core IP.
>
> s/Exynops PCIe diver/Exynos PCIe driver
OK, I will fix this typo.
> > Signed-off-by: Siva Reddy Kallam <siva.kallam@...sung.com>
> > Signed-off-by: Srikanth T Shivanand <ts.srikanth@...sung.com>
> > Signed-off-by: Jingoo Han <jg1.han@...sung.com>
> > Cc: Pratyush Anand <pratyush.anand@...com>
> > Cc: Mohit KUMAR <Mohit.KUMAR@...com>
> > ---
> > arch/arm/boot/dts/exynos5440.dtsi | 2 +
> > arch/arm/mach-exynos/Kconfig | 1 +
> > drivers/pci/host/pci-exynos.c | 60 ++++++++++
> > drivers/pci/host/pcie-designware.c | 213 ++++++++++++++++++++++++++++++++++++
> > drivers/pci/host/pcie-designware.h | 8 ++
> > 5 files changed, 284 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
> > index 586134e..3746835 100644
> > --- a/arch/arm/boot/dts/exynos5440.dtsi
> > +++ b/arch/arm/boot/dts/exynos5440.dtsi
> > @@ -249,6 +249,7 @@
> > interrupt-map-mask = <0 0 0 0>;
> > interrupt-map = <0x0 0 &gic 53>;
> > num-lanes = <4>;
> > + msi-base = <200>;
>
> Please update the bindings documentation too.
OK, I will updated the bindings documentation.
[.....]
> > +#ifdef CONFIG_PCI_MSI
> > +static void exynos_pcie_clear_irq_level(struct pcie_port *pp)
> > +{
> > + u32 val;
> > + struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp);
> > + void __iomem *elbi_base = exynos_pcie->elbi_base;
> > +
> > + val = readl(elbi_base + PCIE_IRQ_LEVEL);
> > + writel(val, elbi_base + PCIE_IRQ_LEVEL);
>
> Sorry, I did not get this. Writing the value read from the same
> register without any operation.
It was intended to clear the bits by writing 1 of each bit.
But I will remove this function.
My coworker, Srikanth T Shivanand found that this function is
unnecessary. This is because PCIE_IRQ_LEVEL register is read-only
register. Also, PCIE_IRQ_LEVEL register is already cleared before
this function is called.
Thank you for your comment.
Best regards,
Jingoo Han
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists