[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANq1E4TGr54owuauUNyHqQ7GOiXf4wByWpaPTX28+SnqDsac+A@mail.gmail.com>
Date: Thu, 29 Aug 2013 18:43:31 +0200
From: David Herrmann <dh.herrmann@...il.com>
To: David Barksdale <dbarksdale@...ogix.com>
Cc: Jiri Kosina <jkosina@...e.cz>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH RESEND] HID: New hid-cp2112 driver.
Hi
On Tue, Aug 27, 2013 at 5:01 PM, David Barksdale <dbarksdale@...ogix.com> wrote:
> This patch adds support for the Silicon Labs CP2112
> "Single-Chip HID USB to SMBus Master Bridge."
>
> I wrote this to support a USB temperature and humidity
> sensor I've been working on. It's been tested by using
> SMBus byte-read, byte-data-read/write, and word-data-read
> transfer modes to talk to an I2C sensor. The other
> transfer modes have not been tested.
>
> Signed-off-by: David Barksdale <dbarksdale@...ogix.com>
>
> ---
> drivers/hid/Kconfig | 6 +
> drivers/hid/Makefile | 1 +
> drivers/hid/hid-core.c | 3 +
> drivers/hid/hid-cp2112.c | 504 +++++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 514 insertions(+)
>
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index 14ef6ab..1833948 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -175,6 +175,12 @@ config HID_PRODIKEYS
> multimedia keyboard, but will lack support for the musical keyboard
> and some additional multimedia keys.
>
> +config HID_CP2112
> + tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
> + depends on USB_HID
> + ---help---
> + Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
> +
> config HID_CYPRESS
> tristate "Cypress mouse and barcode readers" if EXPERT
> depends on HID
> diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> index 6f68728..a88a5c4 100644
> --- a/drivers/hid/Makefile
> +++ b/drivers/hid/Makefile
> @@ -41,6 +41,7 @@ obj-$(CONFIG_HID_AUREAL) += hid-aureal.o
> obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
> obj-$(CONFIG_HID_CHERRY) += hid-cherry.o
> obj-$(CONFIG_HID_CHICONY) += hid-chicony.o
> +obj-$(CONFIG_HID_CP2112) += hid-cp2112.o
> obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
> obj-$(CONFIG_HID_DRAGONRISE) += hid-dr.o
> obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
> index 36668d1..b472a0d 100644
> --- a/drivers/hid/hid-core.c
> +++ b/drivers/hid/hid-core.c
> @@ -1568,6 +1568,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
> +#if IS_ENABLED(CONFIG_HID_CP2112)
> + { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, 0xEA90) },
> +#endif
Why is that #if needed?
> { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
> diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
> new file mode 100644
> index 0000000..8737d18
> --- /dev/null
> +++ b/drivers/hid/hid-cp2112.c
> @@ -0,0 +1,504 @@
> +/*
> + hid-cp2112.c - Silicon Labs HID USB to SMBus master bridge
> + Copyright (c) 2013 Uplogix, Inc.
> + David Barksdale <dbarksdale@...ogix.com>
> +
> + This program is free software; you can redistribute it and/or modify
> + it under the terms of the GNU General Public License as published by
> + the Free Software Foundation; either version 2 of the License, or
> + (at your option) any later version.
> +
> + This program is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + GNU General Public License for more details.
> +
> + You should have received a copy of the GNU General Public License
> + along with this program; if not, write to the Free Software
> + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/hid.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include "hid-ids.h"
> +
> +enum {
> + GET_VERSION_INFO = 0x05,
> + SMBUS_CONFIG = 0x06,
> + DATA_READ_REQUEST = 0x10,
> + DATA_WRITE_READ_REQUEST = 0x11,
> + DATA_READ_FORCE_SEND = 0x12,
> + DATA_READ_RESPONSE = 0x13,
> + DATA_WRITE_REQUEST = 0x14,
> + TRANSFER_STATUS_REQUEST = 0x15,
> + TRANSFER_STATUS_RESPONSE = 0x16,
> + CANCEL_TRANSFER = 0x17,
> +};
> +
> +enum {
> + STATUS0_IDLE = 0x00,
> + STATUS0_BUSY = 0x01,
> + STATUS0_COMPLETE = 0x02,
> + STATUS0_ERROR = 0x03,
> +};
> +
> +enum {
> + STATUS1_TIMEOUT_NACK = 0x00,
> + STATUS1_TIMEOUT_BUS = 0x01,
> + STATUS1_ARBITRATION_LOST = 0x02,
> + STATUS1_READ_INCOMPLETE = 0x03,
> + STATUS1_WRITE_INCOMPLETE = 0x04,
> + STATUS1_SUCCESS = 0x05,
> +};
If you don't add any prefix to these functions (especially
SMBUS_CONFIG) it is quite likely that at some point your driver will
get compile-errors. Any particular reason not to do that? (same
applies to all the function/global-vars below)
> +
> +/* All values are in big-endian */
> +struct __attribute__ ((__packed__)) smbus_config {
> + uint32_t clock_speed; /* Hz */
> + uint8_t device_address; /* Stored in the upper 7 bits */
> + uint8_t auto_send_read; /* 1 = enabled, 0 = disabled */
> + uint16_t write_timeout; /* ms, 0 = no timeout */
> + uint16_t read_timeout; /* ms, 0 = no timeout */
> + uint8_t scl_low_timeout; /* 1 = enabled, 0 = disabled */
> + uint16_t retry_time; /* # of retries, 0 = no limit */
> +};
> +
> +static const int MAX_TIMEOUT = 100;
> +
> +static const struct hid_device_id cp2112_devices[] = {
> + { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, 0xEA90) },
You might want to add a
#define USB_PRODUCT_ID_CYGNAL_CP2112 0xEA90
to drivers/hid/hid-ids.h to avoid this magic-number here and in hid-core.c.
> + { }
> +};
> +MODULE_DEVICE_TABLE(hid, cp2112_devices);
> +
> +struct cp2112_device {
> + struct i2c_adapter adap;
> + struct hid_device *hdev;
> + wait_queue_head_t wait;
> + uint8_t read_data[61];
> + uint8_t read_length;
> + int xfer_status;
> + atomic_t read_avail;
> + atomic_t xfer_avail;
> +};
> +
> +static int cp2112_wait(struct cp2112_device *dev, atomic_t *avail)
> +{
> + int ret = 0;
> +
> + ret = wait_event_interruptible_timeout(dev->wait,
> + atomic_read(avail), msecs_to_jiffies(50));
> + if (-ERESTARTSYS == ret)
> + return ret;
> + if (!ret)
> + return -ETIMEDOUT;
> + atomic_set(avail, 0);
> + return 0;
> +}
> +
> +static int cp2112_xfer_status(struct cp2112_device *dev)
> +{
> + struct hid_device *hdev = dev->hdev;
> + uint8_t buf[2];
> + int ret;
> +
> + buf[0] = TRANSFER_STATUS_REQUEST;
> + buf[1] = 0x01;
> + atomic_set(&dev->xfer_avail, 0);
> + ret = hdev->hid_output_raw_report(hdev, buf, 2, HID_OUTPUT_REPORT);
> + if (ret < 0) {
> + hid_warn(hdev, "Error requesting status: %d\n", ret);
> + return ret;
> + }
> + ret = cp2112_wait(dev, &dev->xfer_avail);
> + if (ret)
> + return ret;
> + return dev->xfer_status;
> +}
> +
> +static int cp2112_read(struct cp2112_device *dev, uint8_t *data, size_t size)
> +{
> + struct hid_device *hdev = dev->hdev;
> + uint8_t buf[3];
> + int ret;
> +
> + buf[0] = DATA_READ_FORCE_SEND;
> + *(uint16_t *)&buf[1] = htons(size);
> + atomic_set(&dev->read_avail, 0);
> + ret = hdev->hid_output_raw_report(hdev, buf, 3, HID_OUTPUT_REPORT);
> + if (ret < 0) {
> + hid_warn(hdev, "Error requesting data: %d\n", ret);
> + return ret;
> + }
> + ret = cp2112_wait(dev, &dev->read_avail);
> + if (ret)
> + return ret;
> + hid_dbg(hdev, "read %d of %d bytes requested\n",
> + dev->read_length, size);
> + if (size > dev->read_length)
> + size = dev->read_length;
> + memcpy(data, dev->read_data, size);
> + return dev->read_length;
> +}
> +
> +static int cp2112_xfer(struct i2c_adapter *adap, uint16_t addr,
> + unsigned short flags, char read_write, uint8_t command,
> + int size, union i2c_smbus_data *data)
> +{
> + struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
> + struct hid_device *hdev = dev->hdev;
> + uint8_t buf[64];
> + size_t count;
> + size_t read_length = 0;
> + size_t write_length;
> + size_t timeout;
> + int ret;
> +
> + hid_dbg(hdev, "%s addr 0x%x flags 0x%x cmd 0x%x size %d\n",
> + read_write == I2C_SMBUS_WRITE ? "write" : "read",
> + addr, flags, command, size);
> + buf[1] = addr << 1;
> + switch (size) {
> + case I2C_SMBUS_BYTE:
> + if (I2C_SMBUS_READ == read_write) {
> + read_length = 1;
> + buf[0] = DATA_READ_REQUEST;
> + *(uint16_t *)&buf[2] = htons(read_length);
> + count = 4;
> + } else {
> + write_length = 1;
> + buf[0] = DATA_WRITE_REQUEST;
> + buf[2] = write_length;
> + buf[3] = data->byte;
> + count = 4;
> + }
> + break;
> + case I2C_SMBUS_BYTE_DATA:
> + if (I2C_SMBUS_READ == read_write) {
> + read_length = 1;
> + buf[0] = DATA_WRITE_READ_REQUEST;
> + *(uint16_t *)&buf[2] = htons(read_length);
> + buf[4] = 1;
> + buf[5] = command;
> + count = 6;
> + } else {
> + write_length = 2;
> + buf[0] = DATA_WRITE_REQUEST;
> + buf[2] = write_length;
> + buf[3] = command;
> + buf[4] = data->byte;
> + count = 5;
> + }
> + break;
> + case I2C_SMBUS_WORD_DATA:
> + if (I2C_SMBUS_READ == read_write) {
> + read_length = 2;
> + buf[0] = DATA_WRITE_READ_REQUEST;
> + *(uint16_t *)&buf[2] = htons(read_length);
> + buf[4] = 1;
> + buf[5] = command;
> + count = 6;
> + } else {
> + write_length = 3;
> + buf[0] = DATA_WRITE_REQUEST;
> + buf[2] = write_length;
> + buf[3] = command;
> + *(uint16_t *)&buf[4] = htons(data->word);
> + count = 6;
> + }
> + break;
> + case I2C_SMBUS_PROC_CALL:
> + size = I2C_SMBUS_WORD_DATA;
> + read_write = I2C_SMBUS_READ;
> + read_length = 2;
> + write_length = 3;
> + buf[0] = DATA_WRITE_READ_REQUEST;
> + *(uint16_t *)&buf[2] = htons(read_length);
> + buf[4] = write_length;
> + buf[5] = command;
> + *(uint16_t *)&buf[6] = data->word;
> + count = 8;
> + break;
> + case I2C_SMBUS_I2C_BLOCK_DATA:
> + size = I2C_SMBUS_BLOCK_DATA;
> + /* fallthrough */
> + case I2C_SMBUS_BLOCK_DATA:
> + if (I2C_SMBUS_READ == read_write) {
> + buf[0] = DATA_WRITE_READ_REQUEST;
> + *(uint16_t *)&buf[2] = htons(I2C_SMBUS_BLOCK_MAX);
> + buf[4] = 1;
> + buf[5] = command;
> + count = 6;
> + } else {
> + write_length = data->block[0];
> + if (write_length > 61 - 2)
> + return -EINVAL;
> + buf[0] = DATA_WRITE_REQUEST;
> + buf[2] = write_length + 2;
> + buf[3] = command;
> + memcpy(&buf[4], data->block, write_length + 1);
> + count = 5 + write_length;
> + }
> + break;
> + case I2C_SMBUS_BLOCK_PROC_CALL:
> + size = I2C_SMBUS_BLOCK_DATA;
> + read_write = I2C_SMBUS_READ;
> + write_length = data->block[0];
> + if (write_length > 16 - 2)
> + return -EINVAL;
> + buf[0] = DATA_WRITE_READ_REQUEST;
> + *(uint16_t *)&buf[2] = htons(I2C_SMBUS_BLOCK_MAX);
> + buf[4] = write_length + 2;
> + buf[5] = command;
> + memcpy(&buf[6], data->block, write_length + 1);
> + count = 7 + write_length;
Isn't there a break; missing?
> + default:
> + hid_warn(hdev, "Unsupported transaction %d\n", size);
> + return -EOPNOTSUPP;
> + }
> + ret = hid_hw_open(hdev);
> + if (ret) {
> + hid_err(hdev, "hw open failed\n");
> + return ret;
> + }
> + ret = hid_hw_power(hdev, PM_HINT_FULLON);
> + if (ret < 0) {
> + hid_err(hdev, "power management error: %d\n", ret);
> + goto hid_close;
> + }
> + ret = hdev->hid_output_raw_report(hdev, buf, count, HID_OUTPUT_REPORT);
> + if (ret < 0) {
> + hid_warn(hdev, "Error starting transaction: %d\n", ret);
> + goto power_normal;
> + }
> + for (timeout = 0; timeout < MAX_TIMEOUT; ++timeout) {
> + ret = cp2112_xfer_status(dev);
> + if (-EBUSY == ret)
> + continue;
> + if (ret < 0)
> + goto power_normal;
> + break;
> + }
> + if (MAX_TIMEOUT <= timeout) {
> + hid_warn(hdev, "Transfer timed out, cancelling.\n");
> + buf[0] = CANCEL_TRANSFER;
> + buf[1] = 0x01;
> + ret = hdev->hid_output_raw_report(hdev, buf, 2,
> + HID_OUTPUT_REPORT);
> + if (ret < 0) {
> + hid_warn(hdev, "Error cancelling transaction: %d\n",
> + ret);
> + }
> + ret = -ETIMEDOUT;
> + goto power_normal;
> + }
> + if (I2C_SMBUS_WRITE == read_write) {
> + ret = 0;
> + goto power_normal;
> + }
> + if (I2C_SMBUS_BLOCK_DATA == size)
> + read_length = ret;
> + ret = cp2112_read(dev, buf, read_length);
> + if (ret < 0)
> + goto power_normal;
> + if (ret != read_length) {
> + hid_warn(hdev, "short read: %d < %d\n", ret, read_length);
> + ret = -EIO;
> + goto power_normal;
> + }
> + switch (size) {
> + case I2C_SMBUS_BYTE:
> + case I2C_SMBUS_BYTE_DATA:
> + data->byte = buf[0];
> + break;
> + case I2C_SMBUS_WORD_DATA:
> + data->word = ntohs(*(uint16_t *)buf);
> + break;
> + case I2C_SMBUS_BLOCK_DATA:
> + if (read_length > I2C_SMBUS_BLOCK_MAX) {
> + ret = -EPROTO;
> + goto power_normal;
> + }
> + memcpy(data->block, buf, read_length);
> + break;
> + }
> + ret = 0;
> +power_normal:
> + hid_hw_power(hdev, PM_HINT_NORMAL);
> +hid_close:
> + hid_hw_close(hdev);
> + hid_dbg(hdev, "transfer finished: %d\n", ret);
> + return ret;
> +}
> +
> +static uint32_t cp2122_functionality(struct i2c_adapter *adap)
> +{
> + return I2C_FUNC_SMBUS_BYTE |
> + I2C_FUNC_SMBUS_BYTE_DATA |
> + I2C_FUNC_SMBUS_WORD_DATA |
> + I2C_FUNC_SMBUS_BLOCK_DATA |
> + I2C_FUNC_SMBUS_I2C_BLOCK |
> + I2C_FUNC_SMBUS_PROC_CALL |
> + I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
> +}
> +
> +static const struct i2c_algorithm smbus_algorithm = {
> + .smbus_xfer = cp2112_xfer,
> + .functionality = cp2122_functionality,
> +};
> +
> +static int
> +cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
> +{
> + struct cp2112_device *dev;
> + uint8_t buf[64];
> + struct smbus_config *config;
> + int ret;
> +
> + ret = hid_parse(hdev);
> + if (ret) {
> + hid_err(hdev, "parse failed\n");
> + return ret;
> + }
> + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
Use HID_CONNECT_HIDRAW or does your device provide more than just the
smbus bridge?
> + if (ret) {
> + hid_err(hdev, "hw start failed\n");
> + return ret;
> + }
You must call hid_hw_open() here, otherwise I/O is not guaranteed to
be possible. It might work for USB now, but you shouldn't do that.
Either call hid_hw_close() after setup is done, or call it in
remove().
> + ret = hdev->hid_get_raw_report(hdev, GET_VERSION_INFO, buf, 3,
> + HID_FEATURE_REPORT);
> + if (ret != 3) {
> + hid_err(hdev, "error requesting version\n");
> + return ret;
return (ret < 0) ? ret : -EIO;
And call hid_hw_stop() before returning, please (and hid_hw_close()).
> + }
> + hid_info(hdev, "Part Number: 0x%02X Device Version: 0x%02X\n",
> + buf[1], buf[2]);
> + ret = hdev->hid_get_raw_report(hdev, SMBUS_CONFIG, buf,
> + sizeof(*config) + 1, HID_FEATURE_REPORT);
> + if (ret != sizeof(*config) + 1) {
> + hid_err(hdev, "error requesting SMBus config\n");
> + return ret;
same as above
> + }
> + config = (struct smbus_config *)&buf[1];
> + config->retry_time = htons(1);
> + ret = hdev->hid_output_raw_report(hdev, buf,
> + sizeof(*config) + 1, HID_FEATURE_REPORT);
> + if (ret != sizeof(*config) + 1) {
> + hid_err(hdev, "error setting SMBus config\n");
> + return ret;
same as above
> + }
> + dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> + if (!dev) {
> + hid_err(hdev, "out of memory\n");
> + return -ENOMEM;
hid_hw_stop() missing (and hid_hw_close())
> + }
> + dev->hdev = hdev;
> + hid_set_drvdata(hdev, (void *)dev);
> + dev->adap.owner = THIS_MODULE;
> + dev->adap.class = I2C_CLASS_HWMON;
> + dev->adap.algo = &smbus_algorithm;
> + dev->adap.algo_data = dev;
> + snprintf(dev->adap.name, sizeof(dev->adap.name),
> + "CP2112 SMBus Bridge on hiddev%d", hdev->minor);
> + init_waitqueue_head(&dev->wait);
> + hid_device_io_start(hdev);
> + ret = i2c_add_adapter(&dev->adap);
> + hid_device_io_stop(hdev);
You should call hid_device_io_stop() only on failure. Otherwise,
hid-core drops any incoming events until you return. If smbus can
handle missing events, this is fine.
In case you don't care for I/O between this and your handler above,
you can call hid_hw_close() here. Note that ->raw_event() is only
called while the device is open.
> + if (ret) {
> + hid_err(hdev, "error registering i2c adapter\n");
> + kfree(dev);
> + hid_set_drvdata(hdev, NULL);
Drop this hid_set_drvdata()
hid_hw_stop() missing (and hid_hw_close())
> + }
> + hid_dbg(hdev, "adapter registered\n");
> + return ret;
> +}
> +
> +static void cp2112_remove(struct hid_device *hdev)
> +{
> + struct cp2112_device *dev = hid_get_drvdata(hdev);
> +
> + if (dev) {
Why if (dev)? Any reason dev might be NULL?
> + i2c_del_adapter(&dev->adap);
> + wake_up_interruptible(&dev->wait);
How can you have waiters on dev->wait if you free() it in the line
below? There ought to be some *_sync() call here which waits for all
possible pending calls to finish.
> + kfree(dev);
> + hid_set_drvdata(hdev, NULL);
Not needed.
> + }
> + hid_hw_stop(hdev);
I recommend calling hid_hw_stop() before destroying your context. Not
strictly needed, but it makes it clear that no I/O is possible during
_remove().
So you can reduce this function to:
hid_hw_stop(hdev);
i2c_del_adapter(&dev->adap);
wake_up_interruptible(&dev->wait);
your_whatever_wait_sync_call()
kfree(dev);
> +}
> +
> +static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report,
> + uint8_t *data, int size)
> +{
> + struct cp2112_device *dev = hid_get_drvdata(hdev);
> +
> + switch (data[0]) {
> + case TRANSFER_STATUS_RESPONSE:
> + hid_dbg(hdev, "xfer status: %02x %02x %04x %04x\n",
> + data[1], data[2], htons(*(uint16_t *)&data[3]),
> + htons(*(uint16_t *)&data[5]));
> + switch (data[1]) {
> + case STATUS0_IDLE:
> + dev->xfer_status = -EAGAIN;
> + break;
> + case STATUS0_BUSY:
> + dev->xfer_status = -EBUSY;
> + break;
> + case STATUS0_COMPLETE:
> + dev->xfer_status = ntohs(*(uint16_t *)&data[5]);
> + break;
> + case STATUS0_ERROR:
> + switch (data[2]) {
> + case STATUS1_TIMEOUT_NACK:
> + case STATUS1_TIMEOUT_BUS:
> + dev->xfer_status = -ETIMEDOUT;
> + break;
> + default:
> + dev->xfer_status = -EIO;
> + }
> + break;
> + default:
> + dev->xfer_status = -EINVAL;
> + break;
> + }
> + atomic_set(&dev->xfer_avail, 1);
> + break;
> + case DATA_READ_RESPONSE:
> + hid_dbg(hdev, "read response: %02x %02x\n", data[1], data[2]);
> + dev->read_length = data[2];
> + if (dev->read_length > sizeof(dev->read_data))
> + dev->read_length = sizeof(dev->read_data);
> + memcpy(dev->read_data, &data[3], dev->read_length);
> + atomic_set(&dev->read_avail, 1);
> + break;
> + default:
> + hid_err(hdev, "unknown report\n");
> + return 0;
> + }
> + wake_up_interruptible(&dev->wait);
> + return 1;
> +}
> +
> +static struct hid_driver cp2112_driver = {
> + .name = "cp2112",
> + .id_table = cp2112_devices,
> + .probe = cp2112_probe,
> + .remove = cp2112_remove,
> + .raw_event = cp2112_raw_event,
> +};
> +
> +static int __init cp2112_init(void)
> +{
> + return hid_register_driver(&cp2112_driver);
> +}
> +
> +static void __exit cp2112_exit(void)
> +{
> + hid_unregister_driver(&cp2112_driver);
> +}
> +
> +module_init(cp2112_init);
> +module_exit(cp2112_exit);
Use:
module_hid_driver(&cp2112_driver);
to save some lines here.
Cheers
David
> +MODULE_DESCRIPTION("Silicon Labs HID USB to SMBus master bridge");
> +MODULE_AUTHOR("David Barksdale <dbarksdale@...ogix.com>");
> +MODULE_LICENSE("GPL");
> +
> --
> tg: (584d88b..) upstream/hid-cp2112 (depends on: upstream/master)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists