linux-kernel - [PATCH v3 3/3] gpio: pcf857x: call the gpio user handler iff gpio_to

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1378089004-14478-4-git-send-email-george.cherian@ti.com>
Date:	Mon, 2 Sep 2013 08:00:04 +0530
From:	George Cherian <george.cherian@...com>
To:	<linus.walleij@...aro.org>
CC:	<linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-omap@...r.kernel.org>, <kuninori.morimoto.gx@...esas.com>,
	<n.a.balandin@...il.com>, George Cherian <george.cherian@...com>
Subject: [PATCH v3 3/3] gpio: pcf857x: call the gpio user handler iff gpio_to_irq is done

For pcf857x driver if the initial state is not set properly (proper
n_latch is not passed), we get bad irq prints on console.
We get this only for the first interrupt and doesnot repeat for further
interrupts unles and until there are other gpio pins which are not flipping
continously.

following prints are seen on console.

[   40.983924] irq 0, desc: ce004080, depth: 1, count: 0, unhandled: 0
[   40.990511] ->handle_irq():  c00aa538, handle_bad_irq+0x0/0x260
[   40.996768] ->irq_data.chip(): c080b6ec, no_irq_chip+0x0/0x60
[   41.002842] ->action():   (null)
[   41.006242]    IRQ_NOPROBE set
[   41.009465]  IRQ_NOREQUEST set

Signed-off-by: George Cherian <george.cherian@...com>
---
 drivers/gpio/gpio-pcf857x.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 4890e97..578d93f 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -93,6 +93,7 @@ struct pcf857x {
 	unsigned		out;		/* software latch */
 	unsigned		status;		/* current status */
 	int			irq;		/* real irq number */
+	unsigned		irq_mapped;	/* mapped gpio irqs */
 
 	int (*write)(struct i2c_client *client, unsigned data);
 	int (*read)(struct i2c_client *client);
@@ -185,8 +186,13 @@ static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value)
 static int pcf857x_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
+	int ret;
 
-	return irq_create_mapping(gpio->irq_domain, offset);
+	ret = irq_create_mapping(gpio->irq_domain, offset);
+	if (ret > 0)
+		gpio->irq_mapped |= (1 << offset);
+
+	return ret;
 }
 
 static irqreturn_t pcf857x_irq(int irq, void *data)
@@ -198,7 +204,12 @@ static irqreturn_t pcf857x_irq(int irq, void *data)
 
 	spin_lock_irqsave(&gpio->slock, flags);
 
-	change = gpio->status ^ status;
+	/*
+	 * call the interrupt handler iff gpio is used as
+	 * interrupt source, just to avoid bad irqs
+	 */
+
+	change = ((gpio->status ^ status) & gpio->irq_mapped);
 	for_each_set_bit(i, &change, gpio->chip.ngpio)
 		generic_handle_irq(irq_find_mapping(gpio->irq_domain, i));
 	gpio->status = status;
@@ -211,9 +222,14 @@ static irqreturn_t pcf857x_irq(int irq, void *data)
 static int pcf857x_irq_domain_map(struct irq_domain *domain, unsigned int virq,
 				 irq_hw_number_t hw)
 {
+	struct pcf857x *gpio = domain->host_data;
+
 	irq_set_chip_and_handler(virq,
 				 &dummy_irq_chip,
 				 handle_level_irq);
+	set_irq_flags(virq, IRQF_VALID);
+	gpio->irq_mapped |= (1 << hw);
+
 	return 0;
 }
 
@@ -236,7 +252,7 @@ static int pcf857x_irq_domain_init(struct pcf857x *gpio,
 	gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
 						 gpio->chip.ngpio,
 						 &pcf857x_irq_domain_ops,
-						 NULL);
+						 gpio);
 	if (!gpio->irq_domain)
 		goto fail;
 
-- 
1.8.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/