| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <E603DC592C92B54A89CEF6B0919A0B1CAAAA787DA1@SOLO.hq.farsitecommunications.com>
Date: Wed, 18 Sep 2013 11:11:53 +0100
From: Kevin Curtis <Kevin.Curtis@...site.com>
To: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"kernel-janitors@...r.kernel.org" <kernel-janitors@...r.kernel.org>,
Dermot Smith <dermot.smith@...site.com>
Subject: [PATCH 002/007] WAN Drivers: Update farsync driver and introduce
fsflex driver
Farsite Communications FarSync driver update
Patch 2 of 7
Introduce a new include file required by the fsflex driver.
Signed-off-by: Kevin Curtis <kevin.curtis@...site.com>
---
diff -uprN -X linux-3.10.1/Documentation/dontdiff linux-3.10.1/drivers/net/wan/uss_cmn.h linux-3.10.1_new/drivers/net/wan/uss_cmn.h
--- linux-3.10.1/drivers/net/wan/uss_cmn.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-3.10.1_new/drivers/net/wan/uss_cmn.h 2013-08-30 11:30:36.766167447 +0100
@@ -0,0 +1,492 @@
+/*
+ * FarSync driver for Linux
+ *
+ * Copyright (C) 2001-2013 FarSite Communications Ltd.
+ * www.farsite.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * File : uss_cmn.h
+ *
+ * Description : FarSync Flex common header file, shared between oncard code
+ * and Windows and Linux drivers.
+ *
+ * NOTE: all parameters are in Little Endian format
+ */
+
+#ifndef INC_USS_CMN
+#define INC_USS_CMN
+
+/* All user data frames transmitted/received to/from the FarSync Flex have an
+ * eight-byte preamble. Although the transmitter does not use all elements of
+ * the preamble, they are included to simplify loopback testing etc.
+ */
+
+#include "fscmn.h"
+
+#define RXDATA_STATUS 0x00
+#define TXDATA_STATUS 0x10
+#define SIGNAL_CHANGE 0x20
+#define TXRX_ERROR 0x30
+
+#define FLEX_TXRX_PREAMBLE FSCMN_TXRX_PREAMBLE
+#define _FLEX_TXRX_PREAMBLE _FSCMN_TXRX_PREAMBLE
+#define PFLEX_TXRX_PREAMBLE PFSCMN_TXRX_PREAMBLE
+
+/* USB Device Requests sent to the card via the default Control Pipe. */
+
+/* When bmRequestType is Vendor; bRequest is defined below.
+ * wValue is a 16-bit parameter whose use varies by command.
+ * wIndex is a 16-bit parameter that usually directs the command to a specific
+ * port, it is sometimes used in conjuncton with wValue to form a 32-bit
+ * parameter for some of the memory access commands.
+ * wLength is is 16-bit paremeter that defines the amount of data associated
+ * with a command. Valid range is zero (no data) to 256 maximum (bytes).
+ * Data is a variable length block containing data specific to each command.
+ */
+
+/* command code */
+
+typedef enum _USS_COMMANDS {
+ USS_CMD_GET_VERSION = 1, /* 0x01 */
+ USS_CMD_READ_FLASH, /* 0x02 */
+ USS_CMD_WRITE_FLASH, /* 0x03 */
+ USS_CMD_ERASE_FLASH, /* 0x04 */
+
+ USS_CMD_START_PORT, /* 0x05 */
+ USS_CMD_STOP_PORT, /* 0x06 */
+ USS_CMD_ABORT_PORT, /* 0x07 */
+
+ USS_CMD_SET_CONFIG, /* 0x08 */
+ USS_CMD_GET_CONFIG, /* 0x09 */
+
+ USS_CMD_SET_SIGNALS, /* 0x0A */
+ USS_CMD_GET_SIGNALS, /* 0x0B */
+
+ USS_CMD_START_BREAK, /* 0x0C */
+ USS_CMD_STOP_BREAK, /* 0x0D */
+
+ USS_CMD_SEND_XON, /* 0x0E */
+ USS_CMD_SEND_XOFF, /* 0x0F */
+
+ USS_CMD_RESET_STATS, /* 0x10 */
+
+ USS_CMD_RESET_TIME, /* 0x11 */
+
+ USS_CMD_FLUSH_BUFFERS, /* 0x12 */
+
+ USS_CMD_SET_DEBUG_LEVEL, /* 0x13 */
+
+ USS_CMD_SEND_SECURE_MSG, /* 0x14 */
+ USS_CMD_RECV_SECURE_RSP, /* 0x15 */
+
+ USS_CMD_SET_INTERFACE, /* 0x16 */
+ USS_CMD_GET_INTERFACE, /* 0x17 */
+
+ USS_CMD_SET_TERMINATION, /* 0x18 */
+ USS_CMD_GET_TERMINATION, /* 0x19 */
+
+ USS_CMD_SET_LINESPEED, /* 0x1A */
+ USS_CMD_GET_LINESPEED, /* 0x1B */
+
+ USS_CMD_SET_CLOCK_SOURCE, /* 0x1C */
+ USS_CMD_GET_CLOCK_SOURCE, /* 0x1D */
+
+ USS_CMD_SET_ENCODING, /* 0x1E */
+ USS_CMD_GET_ENCODING, /* 0x1F */
+
+ USS_CMD_SET_DATA_MODE, /* 0x20 */
+ USS_CMD_GET_DATA_MODE, /* 0x21 */
+
+ USS_CMD_SET_SYNC_CHAR, /* 0x22 */
+ USS_CMD_GET_SYNC_CHAR, /* 0x23 */
+
+ USS_CMD_SET_BIT_ORDER, /* 0x24 */
+ USS_CMD_GET_BIT_ORDER, /* 0x25 */
+
+ USS_CMD_SET_RXC_INVERT, /* 0x26 */
+ USS_CMD_GET_RXC_INVERT, /* 0x27 */
+
+ USS_CMD_SET_START_MODE, /* 0x28 */
+ USS_CMD_GET_START_MODE, /* 0x29 */
+
+ USS_CMD_SET_NUM_TX_BUFFER, /* 0x2A */
+ USS_CMD_GET_NUM_TX_BUFFER, /* 0x2B */
+
+ USS_CMD_SET_NUM_RX_BUFFER, /* 0x2C */
+ USS_CMD_GET_NUM_RX_BUFFER, /* 0x2D */
+
+ USS_CMD_SET_SIZE_TX_BUFFER, /* 0x2E */
+ USS_CMD_GET_SIZE_TX_BUFFER, /* 0x2F */
+
+ USS_CMD_SET_SIZE_RX_BUFFER, /* 0x30 */
+ USS_CMD_GET_SIZE_RX_BUFFER, /* 0x31 */
+
+ USS_CMD_SET_DATA_BITS, /* 0x32 */
+ USS_CMD_GET_DATA_BITS, /* 0x33 */
+
+ USS_CMD_SET_PARITY, /* 0x34 */
+ USS_CMD_GET_PARITY, /* 0x35 */
+
+ USS_CMD_SET_STOP_BITS, /* 0x36 */
+ USS_CMD_GET_STOP_BITS, /* 0x37 */
+
+ USS_CMD_SET_FLOW_CONTROL, /* 0x38 */
+ USS_CMD_GET_FLOW_CONTROL, /* 0x39 */
+
+ USS_CMD_SET_RX_TIMEOUT_ENABLE, /* 0x3A */
+ USS_CMD_GET_RX_TIMEOUT_ENABLE, /* 0x3B */
+
+ USS_CMD_SET_RX_TIMEOUT_LENGTH, /* 0x3C */
+ USS_CMD_GET_RX_TIMEOUT_LENGTH, /* 0x3D */
+
+ USS_CMD_RESET_PORT_STATS, /* 0x3E */
+ USS_CMD_GET_PORT_STATS, /* 0x3F */
+
+ USS_CMD_SET_IDENTIFY_MODE, /* 0x40 */
+ USS_CMD_GET_CARD_INFO, /* 0x41 */
+
+ USS_CMD_RESET_USB_STATS, /* 0x42 */
+ USS_CMD_GET_USB_STATS, /* 0x43 */
+
+ USS_CMD_SET_LOOP_MODE, /* 0x44 */
+ USS_CMD_GET_LOOP_MODE, /* 0x45 */
+
+ USS_CMD_GET_CLOCK_STATUS, /* 0x46 */
+ USS_CMD_GET_CLOCK_RATE, /* 0x47 */
+
+ USS_CMD_SET_MONITOR_MODE, /* 0x48 */
+ USS_CMD_GET_MONITOR_MODE, /* 0x49 */
+
+ USS_CMD_SET_EXTENDED_CLOCKING, /* 0x4A */
+ USS_CMD_GET_EXTENDED_CLOCKING, /* 0x4B */
+
+ USS_CMD_SET_INTERNAL_TX_CLOCK, /* 0x4C */
+ USS_CMD_GET_INTERNAL_TX_CLOCK, /* 0x4D */
+
+ USS_CMD_SET_INTERNAL_RX_CLOCK, /* 0x4E */
+ USS_CMD_GET_INTERNAL_RX_CLOCK, /* 0x4F */
+
+ USS_CMD_SET_ENABLE_NRZI_CLOCKING, /* 0x50 */
+ USS_CMD_GET_ENABLE_NRZI_CLOCKING, /* 0x51 */
+
+ USS_CMD_SET_XON_CHAR, /* 0x52 */
+ USS_CMD_GET_XON_CHAR, /* 0x53 */
+
+ USS_CMD_SET_XOFF_CHAR, /* 0x54 */
+ USS_CMD_GET_XOFF_CHAR, /* 0x55 */
+
+ USS_CMD_SET_PRESERVE_SIGNALS, /* 0x56 */
+ USS_CMD_GET_PRESERVE_SIGNALS, /* 0x57 */
+
+ USS_CMD_SET_ASYNC_RX_MODE, /* 0x58 */
+ USS_CMD_GET_ASYNC_RX_MODE, /* 0x59 */
+
+ USS_CMD_INJECT_ERRORS, /* 0x5A */
+
+ USS_CMD_SOFT_RESET, /* 0x5B */
+
+ USS_CMD_SET_CRC_RESET, /* 0x5C */
+ USS_CMD_GET_CRC_RESET, /* 0x5D */
+
+ USS_CMD_SET_EXT_CONFIG, /* 0x5E */
+ USS_CMD_GET_EXT_CONFIG, /* 0x5F */
+
+ USS_CMD_GET_CAPABILITY_MASK, /* 0x60 */
+ USS_CMD_GET_FEATURE_MASK, /* 0x61 */
+
+ USS_CMD_SEND_MARK, /* 0x62 */
+
+ /* others to be added... */
+
+ USS_CMD_MAX /* 0x0 */
+} USS_COMMANDS;
+
+/* Port Configuration Structure */
+
+typedef struct {
+#define FLEX_SERCONF_VERSION 8
+
+ u32 u_version; /* Version of this structure */
+ u32 iface; /* interface type */
+ u32 termination; /* interface termination */
+ u32 line_speed; /* data rate in bps */
+ u32 clock; /* clock source */
+ u32 encoding; /* data encoding */
+ u32 mode; /* data mode */
+ u32 sync_char; /* Monosync/Bisync sync characters */
+ u32 bit_order; /* Tx/Rx MSB first */
+ u32 rxclock; /* receive clock inversion */
+ u32 start; /* tx and rx start */
+ u32 num_tx_buffer;
+ u32 num_rx_buffer;
+ u32 size_tx_buffer;
+ u32 size_rx_buffer;
+ u32 data_bits; /* async data bits */
+ u32 parity; /* async parity bits */
+ u32 stopbits; /* async stop bits */
+ u32 flow_control; /* async flow control */
+ u32 timeout_enable; /* async timeout enable */
+ u32 timeout_length; /* async timeout length */
+ u32 monitor_mode; /* open port in monitor mode,
+ * when TRUE - added VERSION 2
+ */
+ u32 extended_clocking; /* when TRUE, the following overrides clock
+ * parameter - added VERSION 3
+ */
+ u32 internal_tx_clock; /* independent control over transmit clock,
+ * TRUE => internal
+ */
+ u32 internal_rx_clock; /* independent control over receive clock,
+ * TRUE => internal
+ */
+ u32 enable_nrzi_clocking; /* clocking provided with NRZI data
+ * when TRUE - added VERSION 4
+ */
+ u32 xonchar; /* xon character, 0 => default
+ * (ctrl-Q, 0x11)
+ */
+ u32 xoffchar; /* xoff character, 0 => default
+ * (ctrl-S, 0x13)
+ */
+ u32 preserve_signals; /* preserve signals on port closure,
+ * when TRUE - added VERSION 5
+ */
+ u32 async_receive_mode; /* async specifies format of fifo rx data
+ * - added VERSION 6
+ */
+ u32 crc_reset; /* CRC initial value reset - added VERSION 7 */
+ u32 extended_config; /* Extended Configuration - added VERSION 8 */
+} FLEX_SERCONF, *PFLEX_SERCONF;
+
+/* Card Information */
+
+typedef struct {
+#define FFCARDINFO_VERSION 1
+
+ u32 u_version; /* Version number of this structure */
+
+ u8 sz_serial_no[16]; /* FarSync Flex serial number */
+ u32 u_major_rev; /* Major hardware revision number */
+ u32 u_minor_rev; /* Minor hardware revision number */
+ u32 u_build_state; /* FarSync Flex build state */
+ u32 u_cpu_speed; /* ARM 7 CPU speed */
+ u32 u_mode; /* Internal card mode */
+
+ u32 u_software_version; /* Version number of running code */
+ u32 u_arm_version; /* USS2828 CHIP_VERSION register */
+ u32 uflash_manf_id; /* Manufacturer ID of FLASH */
+ u32 uflash_dev_id; /* Device ID of FLASH */
+ u32 u_serocco_version; /* SEROCCO-M VER3..0 registers */
+
+ u32 spare[17];
+} FLEX_CARD_INFO, *PFLEX_CARD_INFO; /* sizeof(FLEX_CARD_INFO) = 128 */
+
+/* USB statistics counters maintained by Flex hardware, modulo 65536 */
+
+typedef struct {
+ u32 u_rx_packet_counter; /* number of packets received by USB
+ * (16-bit)
+ */
+ u32 u_packet_dropped; /* packets dropped by USB
+ * (16-bit)
+ */
+ u32 u_crc_error; /* CRC errors in token or data packets
+ * (16-bit)
+ */
+ u32 u_bit_stuff_error; /* bit stuff errors (16-bit) */
+ u32 u_pid_error; /* errors in PID fields (16-bit) */
+ u32 u_framing_error; /* errors in SYNC and EOP fields (16-bit) */
+ u32 u_tx_packet_counter; /* number of packets transmitted by USB
+ * (16-bit)
+ */
+ u32 u_stat_counter_overflow; /* overflows in previous counters
+ * ( 8-bit)
+ */
+} FLEX_USB_STATS, *PFLEX_USB_STATS;
+
+/* Configuration Parameter Defines */
+
+/* Async data bits defines */
+
+#define COM_DATA_BITS_8 0
+#define COM_DATA_BITS_7 1
+#define COM_DATA_BITS_6 2
+#define COM_DATA_BITS_5 3
+
+#define COM_DATA_BITS_DEFAULT COM_DATA_BITS_8
+
+/* Async parity defines */
+
+#define COM_NO_PARITY 0
+#define COM_ODD_PARITY 1
+#define COM_EVEN_PARITY 2
+#define COM_FORCE_PARITY_1 3
+#define COM_FORCE_PARITY_0 4
+
+#define COM_PARITY_DEFAULT COM_NO_PARITY
+
+/* Async stop bit defines */
+
+#define COM_STOP_BITS_1 0
+#define COM_STOP_BITS_1_5 1
+#define COM_STOP_BITS_2 2
+
+#define COM_STOP_DEFAULT COM_STOP_BITS_1
+
+/* Async flow control defines */
+
+#define COM_FLOW_CONTROL_NONE 1
+#define COM_FLOW_CONTROL_RTSCTS 2
+#define COM_FLOW_CONTROL_XONXOFF 3
+
+#define COM_FLOW_CONTROL_DEFAULT COM_FLOW_CONTROL_NONE
+
+/* Flush buffers defines */
+
+#define FLUSH_TX_BUFFERS 1
+#define FLUSH_RX_BUFFERS 2
+
+/* Async timeout enable defines */
+
+#define COM_RX_TIMEOUT_DISABLE 0
+#define COM_RX_TIMEOUT_ENABLE 1
+
+#define COM_RX_TIMEOUT_DEFAULT COM_RX_TIMEOUT_DISABLE
+
+/* Async timeout length defines */
+
+/* Loopback mode defines */
+
+#define FLEX_LOOP_NONE 0
+#define FLEX_LOOP_USB 1
+#define FLEX_LOOP_SERIAL 2
+
+#define FLEX_LOOP_DEFAULT FLEX_LOOP_NONE
+
+/* Extended Configuration defines */
+
+#define EXT_CONFIG_NONE 0
+#define EXT_CONFIG_RTT 1
+#define EXT_CONFIG_TTT 2
+#define EXT_CONFIG_RIV 4
+#define EXT_CONFIG_TIV 8
+
+#define EXT_CONFIG_DEFAULT EXT_CONFIG_NONE
+
+#endif /* INC_USS_CMN */
+
+/*****************************************************************************/
+/* Structure for the device driver interface record. */
+/*****************************************************************************/
+
+#define CEDSTCRC 0 /* Frames received with incorrect CRC */
+#define CEDSTOFL 1 /* Frames received longer than the maximum */
+#define CEDSTUFL 2 /* Frames received less than 4 octets long */
+#define CEDSTSPR 3 /* Frames received ending on a non-octet
+ * bndry
+ */
+#define CEDSTABT 4 /* Aborted frames received */
+#define CEDSTTXU 5 /* Transmitter interrupt underruns */
+#define CEDSTRXO 6 /* Receiver interrupt overruns */
+#define CEDSTDCD 7 /* DCD (RLSD) lost during frame reception */
+#define CEDSTCTS 8 /* CTS lost while transmitting */
+#define CEDSTDSR 9 /* DSR drops */
+#define CEDSTHDW 10 /* Hardware failures - adapter errors */
+
+#define CEDSTMAX 11
+
+#define SACRCERROR CEDSTCRC
+#define SARXFRAMETOOBIG CEDSTOFL
+#define SARXFRAMETOOSHORT CEDSTUFL
+#define SASPARE CEDSTSPR
+#define SARXABORT CEDSTABT
+#define SATXUNDERRUN CEDSTTXU
+#define SARXOVERRUN CEDSTRXO
+#define SADCDDROP CEDSTDCD
+#define SACTSDROP CEDSTCTS
+#define SADSRDROP CEDSTDSR
+#define SAHARDWAREERROR CEDSTHDW
+
+/* FarSync-specific counters mapped to existing SDCI definitions */
+#define SAFRAMINGERROT SASARE
+#define SARXERROR SAHARDWAREERROR
+#define SABUFFERUNAVAILABLE SADCDDROP
+#define SAPARITY SACRCERROR
+
+#define SAMAXSTAT CEDSTMAX
+
+#define STATUS_SUCCESS 0x80
+#define STATUS_PENDING 0x00
+#define STATUS_UNSUCCESSFUL 0x90
+#define STATUS_CANCELLED 0xC0
+
+/* ***************************************************************************
+ * FarSync supports the following counters. All other counter indices are not
+ * used by FarSync.
+ * SA_CRC_Error Sync & Async modes
+ * SA_FramingError Sync & Async modes
+ * SA_RxOverrun Sync & Async modes
+ * SA_RxAbort (Async) & (M1P Sync) modes only
+ * SA_RxError Sync mode only
+ * SA_TxUnderrun Sync mode only
+ * SA_RxFrameTooShort M1P Sync mode only
+ * SA_RxFrameTooBig Async mode (fifo overflow) & M1P Sync
+ * Note that
+ * 1) Async mode is currently only supported on the T4U - it is an
+ * optional extra feature
+ * 2) On a TxU an SA_RxError indicates a received abort OR a rx frame
+ * length error
+ * (too big OR too small)
+ * 3) On an M1P an SA_RxError indicates a alternative type of RxO as
+ * reported via
+ * SA_RxOverrun
+ * ***************************************************************************
+ */
+
+/*****************************************************************************/
+/* InterfaceRecord definition */
+/* */
+/* For use with: */
+/* */
+/* IoctlCodeReadInterfaceRecord, */
+/* IoctlCodeFarSyncReadInterfaceRecord */
+/* */
+/*****************************************************************************/
+typedef struct _INTERFACE_RECORD {
+ int rx_frame_count; /* incremented after each frame rx'd */
+ int tx_max_fr_size_now; /* max available frame size av. now */
+ /* (changes after each Tx DevIoctl */
+ /* to DD or after Tx completed) */
+ int status_count; /* How many status events have been */
+ /* triggered. */
+ u8 v24_in; /* Last 'getv24 i/p' value got */
+ u8 v24_out; /* Last 'setv24 o/p' value set */
+
+/* The values for the indexes into the link statistics array of the */
+/* various types of statistic. */
+
+ int status_array[SAMAXSTAT];
+
+} IR, *PIR;
+
+/*****************************************************************************/
+/* InterfaceRecordEx definition */
+/* */
+/* For use with: */
+/* */
+/* IoctlCodeFarSyncReadInterfaceRecordEx */
+/* */
+/*****************************************************************************/
+typedef struct _INTERFACE_RECORD_EX {
+ IR interface_record;
+ int status_count; /* How many status events have been */
+ u32 opened_count;
+ u32 tx_request_count;
+ u32 tx_complete_count;
+ u32 rx_posted_count;
+ u32 rx_complete_count;
+} IREX, *PIREX;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists