Date:	Thu, 26 Sep 2013 14:42:23 +0200
From:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
To:	Jean-Francois Moine <moinejf@...e.fr>
CC:	linux-arm-kernel@...ts.infradead.org,
	Jason Cooper <jason@...edaemon.net>,
	Rob Herring <rob.herring@...xeda.com>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Stephen Warren <swarren@...dotorg.org>,
	Ian Campbell <ian.campbell@...rix.com>,
	Russell King <linux@....linux.org.uk>,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT

On 09/26/2013 01:28 PM, Jean-Francois Moine wrote:
> On Thu, 26 Sep 2013 10:31:10 +0200
> Sebastian Hesselbarth <sebastian.hesselbarth@...il.com> wrote:
>
>> On 09/26/2013 10:11 AM, Jean-Francois Moine wrote:
>>> In the Cubox, I changed the audio DT to:
>>>
>>> &i2s1 {
>>> 	status = "okay";
>>> 	clocks = <&gate_clk 13>, <&si5351 1>;
>>> 	clock-names = "internal", "extclk";
>>> 	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_gpio_13_audio1>;
>>
>> Have you checked that pinmux was configured correctly?
>>
>> You are missing a
>>
>> pinctrl-names = "default";
>>
>> to actually execute the above pinmux setting.
>
> Thanks, the pinmux was not set correctly, and I added the "default".
>
> 	[snip]
>> What about trying to get 48kHz working first? Does it work with
>> internal DCO and 48kHz? External audio clock should be 256*fs as stated
>> in dove datasheet.
>
> I have no input with 48kHz.

Or 44k1, just something that works with internal dco. kirkwood-i2s
should request 256*fs, or 11289600 Hz for 44k1 audio rate from external
clock.

>>> For more information, I use i2s input in the tda998x with audio rate
>>> 96kHz on HDMI output. The sound is fine with the internal dco (tested
>>> with 44.1kHz only).
>>
>> Sorry, I don't understand the above "information". How can you have a
>> different input audio rate tested with 44k1 output rate?
>
> The internal dco permits only 44.1, 44 and 96 kHz, so, vlc translates
> the input rates smaller than 44.1 kHz to 44.1 kHz.

So you are actually testing 44k1 in any case. Let's stick with 44k1 for
now.

>> Have you ever tested your audio equipment with something different than
>> 48k and 44k1 SPDIF PCM? Are you actually sure it works at all, i.e. do
>> you have different audio source with SPDIF >48kHz? Can you try optical
>> SPDIF instead of HDMI?
>>
>> Just try to narrow it down, currently I cannot see why this behavior
>> should be limited to either si5351 or dove audio alone.
>
> I have no optical S/PDIF.

Ok, but 44k1 works with HDMI, we try to reproduce 44k1 with external
clock now.

> Well, I did more tests:
>
> - i2s or s/pdif input by the tda998x work fine with the internal dco

Ok.

> - the pinmux seems correct:
>
> device f10b4000.audio-controller
> state default
> type MUX_GROUP (2)
> controlling device f10d0200.pin-ctrl
> group mpp_audio1
> function i2s1/spdifo
>
> device f10b4000.audio-controller
> state default
> type MUX_GROUP (2)
> controlling device f10d0200.pin-ctrl
> group mpp13
> function audio1
>
> - I tried both <&si5351 1> and <&si5351 2>, and I get no sound with the
>    external clock.
>
> - when running vlc with the external clock, the flux towards the
>    kirkwood driver is blocked and there is no sound interrupt.
>
>   47:          0  main-interrupt-ctrl  21  kirkwood-i2s

Can you add "usleep_range(10000, 12000);" after clk_set_rate(extclk) in
kirkwood-i2s. That should be enough to get around any issues with
external clock not being stable. I will look up real requirements for
si5351 later (and actually this should move to clk-si5351.c later too).

Please make sure, you stick with 44k1 (or something that works with
DCO).

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists