[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130927122439.GA8360@kahuna>
Date: Fri, 27 Sep 2013 07:24:39 -0500
From: Nishanth Menon <nm@...com>
To: Eduardo Valentin <eduardo.valentin@...com>
CC: <swarren@...dotorg.org>, <pawel.moll@....com>,
<mark.rutland@....com>, <ian.campbell@...rix.com>,
<rob.herring@...xeda.com>, <linux@...ck-us.net>,
<rui.zhang@...el.com>, <wni@...dia.com>,
<devicetree@...r.kernel.org>, <durgadoss.r@...el.com>,
<linux-pm@...r.kernel.org>, Tony Lindgren <tony@...mide.com>,
<devicetree-discuss@...ts.ozlabs.org>,
<linux-kernel@...r.kernel.org>, <lm-sensors@...sensors.org>,
Benoît Cousson <bcousson@...libre.com>,
<grant.likely@...aro.org>, Russell King <linux@....linux.org.uk>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCHv4 11/18] arm: dts: add omap4430 thermal data
On 23:13-20130926, Eduardo Valentin wrote:
> This patch changes the dtsi entry on omap4430 to contain
> the thermal data. This data will enable the passive
> cooling with CPUfreq cooling device at 100C and the
> system will do a thermal shutdown at 125C.
>
> Cc: "Benoît Cousson" <bcousson@...libre.com>
> Cc: Tony Lindgren <tony@...mide.com>
> Cc: Russell King <linux@....linux.org.uk>
> Cc: linux-omap@...r.kernel.org
> Cc: devicetree-discuss@...ts.ozlabs.org
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-kernel@...r.kernel.org
> Signed-off-by: Eduardo Valentin <eduardo.valentin@...com>
> ---
> arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
> index bcf455e..e9c97d6 100644
> --- a/arch/arm/boot/dts/omap443x.dtsi
> +++ b/arch/arm/boot/dts/omap443x.dtsi
> @@ -12,7 +12,7 @@
>
> / {
> cpus {
> - cpu@0 {
> + cpu0: cpu@0 {
> /* OMAP443x variants OPP50-OPPNT */
> operating-points = <
> /* kHz uV */
> @@ -25,9 +25,15 @@
> };
> };
>
> - bandgap {
> + thermal-zones{
> + #include "omap4-cpu-thermal.dtsi"
> + };
> +
> + bandgap: bandgap {
> reg = <0x4a002260 0x4
> 0x4a00232C 0x4>;
> compatible = "ti,omap4430-bandgap";
> +
> + #thermal-sensor-cells = <0>;
2 cents:
we might want to move bandgap under ocp?
> };
> };
> --
> 1.8.2.1.342.gfa7285d
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists