[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <AE597DCC-83D7-4BCD-8990-3D63540F32EA@codeaurora.org>
Date: Fri, 27 Sep 2013 11:06:38 -0500
From: Kumar Gala <galak@...eaurora.org>
To: Suman Anna <s-anna@...com>
Cc: Ohad Ben-Cohen <ohad@...ery.com>, Tony Lindgren <tony@...mide.com>,
Benoit Cousson <bcousson@...libre.com>,
Paul Walmsley <paul@...an.com>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCHv2 2/9] hwspinlock/omap: add support for dt nodes
On Sep 17, 2013, at 2:30 PM, Suman Anna wrote:
> HwSpinlock IP is present only on OMAP4 and other newer SoCs,
> which are all device-tree boot only. This patch adds the
> base support for parsing the DT nodes, and removes the code
> dealing with the traditional platform device instantiation.
>
> Signed-off-by: Suman Anna <s-anna@...com>
> ---
> .../devicetree/bindings/hwlock/omap-hwspinlock.txt | 31 +++++++++++
> arch/arm/mach-omap2/Makefile | 3 --
> arch/arm/mach-omap2/hwspinlock.c | 60 ----------------------
> drivers/hwspinlock/omap_hwspinlock.c | 23 +++++++--
> 4 files changed, 50 insertions(+), 67 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
> delete mode 100644 arch/arm/mach-omap2/hwspinlock.c
>
> diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
> new file mode 100644
> index 0000000..235b7c5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
> @@ -0,0 +1,31 @@
> +OMAP4+ HwSpinlock Driver
> +========================
> +
> +Required properties:
> +- compatible: Currently supports only "ti,omap4-hwspinlock" for
> + OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
> +- reg: Contains the hwspinlock register address range (base
> + address and length)
> +- ti,hwmods: Name of the hwmod associated with the hwspinlock device
> +
> +Common hwlock properties:
> +The following describes the usage of the common hwlock properties (defined in
> +Documentation/devicetree/bindings/hwlock/hwlock.txt) on OMAP.
> +
> +- hwlock-base-id: There are currently no OMAP SoCs with multiple
> + hwspinlock devices. The OMAP driver uses a default
> + base id value of 0 for the locks present within the
> + single hwspinlock device on all SoCs.
> +- hwlock-num-locks: This property is not required on OMAP SoCs, since the
> + number of locks present within a device can be deduced
> + from the SPINLOCK_SYSSTATUS device register.
If you are going to be explicit about this properties, you should probably be a bit more clear about them NOT being in the OMAP dts because of the reasons you specify.
> +
> +
> +Example:
> +
> +/* OMAP4 */
> +hwspinlock: spinlock@...f6000 {
> + compatible = "ti,omap4-hwspinlock";
> + reg = <0x4a0f6000 0x1000>;
> + ti,hwmods = "spinlock";
> +};
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists