[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <302FC9DF-1149-4B71-AFC6-7DE05885F2CE@codeaurora.org>
Date: Wed, 30 Oct 2013 02:19:00 -0500
From: Kumar Gala <galak@...eaurora.org>
To: Mark Rutland <mark.rutland@....com>
Cc: Stephen Boyd <sboyd@...eaurora.org>,
"linux-edac@...r.kernel.org" <linux-edac@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: Re: [PATCH 4/6] edac: Document Krait L1/L2 EDAC driver binding
On Oct 29, 2013, at 7:38 PM, Mark Rutland wrote:
> On Tue, Oct 29, 2013 at 06:00:59PM +0000, Stephen Boyd wrote:
>> On 10/29/13 01:21, Kumar Gala wrote:
>>> On Oct 28, 2013, at 7:31 PM, Stephen Boyd wrote:
>>>
>>>> The Krait L1/L2 error reporting device is made up of two
>>>> interrupts, one per-CPU interrupt for the L1 caches and one
>>>> interrupt for the L2 cache.
>>>>
>>>> Cc: <devicetree@...r.kernel.org>
>>>> Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
>>>> ---
>>>> .../devicetree/bindings/arm/qcom,krait-cache-erp.txt | 16 ++++++++++++++++
>>>> 1 file changed, 16 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/arm/qcom,krait-cache-erp.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/arm/qcom,krait-cache-erp.txt b/Documentation/devicetree/bindings/arm/qcom,krait-cache-erp.txt
>>>> new file mode 100644
>>>> index 0000000..01fe8a8
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/arm/qcom,krait-cache-erp.txt
>>>> @@ -0,0 +1,16 @@
>>>> +* Qualcomm Krait L1 / L2 cache error reporting
>>>> +
>>>> +Required properties:
>>>> +- compatible: Should be "qcom,krait-cache-erp"
>>>> +- interrupts: Should contain the L1/CPU error interrupt number and
>>>> + then the L2 cache error interrupt number
>>>> +
>>>> +Optional properties:
>>>> +- interrupt-names: Should contain the interrupt names "l1_irq" and
>>>> + "l2_irq"
>>>> +
>>>> +Example:
>>>> + edac {
>>>> + compatible = "qcom,krait-cache-erp";
>>>> + interrupts = <1 9 0xf04>, <0 2 0x4>;
>>>> + };
>>> Why wouldn't we have these as part of cache nodes in the dts? (which begs the question why we don't have cache nodes?)
>>>
>>
>> I can certainly add cache nodes and cpu nodes and then put the
>> interrupts in those nodes. I was thinking along those same lines when I
>> ported this driver but figured it would be good to get something out
>> there. The only question I have is how am I supposed to hook that up
>> into the linux device model? Will the edac driver bind to the device
>> created for the cpus node and the cache node? I guess it will have to be
>> a driver that binds to two devices.
>>
>> One could argue that we should put the cp15 based architected timers in
>> the cpus node also but so far nobody has done that and I think there was
>> some reasoning behind that, Mark?
>
> The architected timer binding was created at a time I wasn't involved in kernel
> development, and I'm not aware of any particular reasoning. I've heard that
> there was a decision to not duplicate banked resources, which would explain not
> having the timer under /cpus/cpu@N, but doesn't imply that having it under
> /cpus is bad.
>
> Do we have precedent for putting any devices other than CPUs in /cpus?
On PPC we had core cache's (depending on topology) that would be there, and thus why I raised the suggestion.
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists