[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1384779462.13631.16.camel@iivanov-dev.int.mm-sol.com>
Date: Mon, 18 Nov 2013 14:57:42 +0200
From: "Ivan T. Ivanov" <iivanov@...sol.com>
To: Mark Rutland <mark.rutland@....com>
Cc: "balbi@...com" <balbi@...com>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"rob.herring@...xeda.com" <rob.herring@...xeda.com>,
Pawel Moll <Pawel.Moll@....com>,
"swarren@...dotorg.org" <swarren@...dotorg.org>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
"davidb@...eaurora.org" <davidb@...eaurora.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Manu Gautam <mgautam@...eaurora.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: Re: [PATCH v4 12/15] usb: phy: msm: Add support for secondary PHY
control
Hi Mark,
On Fri, 2013-11-15 at 16:42 +0000, Mark Rutland wrote:
> On Tue, Nov 12, 2013 at 02:51:47PM +0000, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <iivanov@...sol.com>
> >
> > Allow support to use 2nd HSPHY with USB2 Core.
> > Some platforms may have configuration to allow USB controller
> > work with any of the two HSPHYs present. By default driver
> > configures USB core to use primary HSPHY. Add support to allow
> > user select 2nd HSPHY using DT parameter.
> >
> > Signed-off-by: Ivan T. Ivanov <iivanov@...sol.com>
> > Cc: Manu Gautam <mgautam@...eaurora.org>
> > Cc: devicetree@...r.kernel.org
> > ---
> > .../devicetree/bindings/usb/msm-hsusb.txt | 6 +++++
> > drivers/usb/phy/phy-msm-usb.c | 24 ++++++++++++++++++--
> > include/linux/usb/msm_hsusb.h | 1 +
> > include/linux/usb/msm_hsusb_hw.h | 1 +
> > 4 files changed, 30 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> > index 3f21204..d105ba9 100644
> > --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> > +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> > @@ -72,6 +72,12 @@ Optional properties:
> > - qcom,phy-init-sequence: PHY configuration sequence. val, reg pairs
> > terminate with -1
> >
> > +- qcom,phy-num: Select number of pyco-phy to use, can be one of
> > + 0 - PHY one, default
> > + 1 - Second PHY
> > + Some platforms may have configuration to allow USB
> > + controller work with any of the two HSPHYs present.
> > +
>
> Only one can be used at a time?
Yes only one of them. Selected at driver init time.
>
> [...]
>
> > @@ -1395,6 +1412,9 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
> > if (!of_property_read_u32(node, "qcom,otg-control", &val))
> > pdata->otg_control = val;
> >
> > + if (!of_property_read_u32(node, "qcom,phy-num", &val))
> > + motg->phy_number = val;
>
> No sanity checking? If not all of your tests on the value of
> motg->phy_number are the same form, you may get undepected results...
All checks are the same, but will add explicit check.
Thanks,
Ivan
>
> Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists