[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20131127223650.GP31091@beef>
Date: Wed, 27 Nov 2013 17:36:50 -0500
From: Matt Porter <matt.porter@...aro.org>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: Felipe Balbi <balbi@...com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Kumar Gala <galak@...eaurora.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Christian Daudt <bcm@...thebug.org>,
Paul Zimmerman <paulz@...opsys.com>,
Tomasz Figa <t.figa@...sung.com>,
Kamil Debski <k.debski@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Linux USB List <linux-usb@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Devicetree List <devicetree@...r.kernel.org>,
Linaro Patches <patches@...aro.org>
Subject: Re: [PATCH v3 5/9] usb: gadget: s3c-hsotg: use generic
phy_init()/phy_exit() support
On Wed, Nov 27, 2013 at 12:13:25PM -0500, Matt Porter wrote:
> On Tue, Nov 26, 2013 at 03:53:32PM +0530, Kishon Vijay Abraham I wrote:
> > Hi,
> >
> > On Monday 25 November 2013 11:46 PM, Matt Porter wrote:
> > > If a generic phy is present, call phy_init()/phy_exit(). This supports
> > > generic phys that must be soft reset before power on.
> > >
> > > Signed-off-by: Matt Porter <matt.porter@...aro.org>
> > > ---
> > > drivers/usb/gadget/s3c-hsotg.c | 5 +++++
> > > 1 file changed, 5 insertions(+)
> > >
> > > diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
> > > index da3879b..8dfe33f 100644
> > > --- a/drivers/usb/gadget/s3c-hsotg.c
> > > +++ b/drivers/usb/gadget/s3c-hsotg.c
> > > @@ -3622,6 +3622,9 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
> > > goto err_supplies;
> > > }
> > >
> > > + if (hsotg->phy)
> >
> > IS_ERR? If your phy_get fails *phy* will have a error value..
>
> Yes, thanks. I'll fix these and also note that the same issue exists in
> Kamil's patch for these same hsotg->phy conditional uses. I'll work with
> Kamil to either get those addressed there or in a follow on fix.
I spoke too soon. If devm_phy_get fails, we don't set hsotg->phy and probe
defer thus not reaching this point. Since hsotg->phy is either NULL or a
valid struct phy *, this is correct as is throughout the driver.
> >
> > > + phy_init(hsotg->phy);
> > > +
> > > /* usb phy enable */
> > > s3c_hsotg_phy_enable(hsotg);
> > >
> > > @@ -3715,6 +3718,8 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
> > > }
> > >
> > > s3c_hsotg_phy_disable(hsotg);
> > > + if (hsotg->phy)
> >
> > same here.
>
> Ok.
Same above, this will be NULL on failure (but is only applicable at this
point on the platform data path.
-Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists