[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAAfyv35gVVNydrk8vifSyidpFjEXjGiT4-i2dgN5Un2=FuHaqQ@mail.gmail.com>
Date: Tue, 3 Dec 2013 10:20:00 +0100
From: Belisko Marek <marek.belisko@...il.com>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: Tony Lindgren <tony@...mide.com>,
Russell King - ARM Linux <linux@....linux.org.uk>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
"Dr. H. Nikolaus Schaller" <hns@...delico.com>
Subject: Re: [PATCH] omap: twl-common: Fix musb-hdrc device name.
On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek <marek.belisko@...il.com> wrote:
> Hi,
>
> On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I <kishon@...com> wrote:
>> Hi,
>>
>> On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote:
>>> Without this change when booting omap3 device (gta04) with board file
>>> leads to follwing errors:
>>>
>>> [ 1.203308] musb-hdrc musb-hdrc.0.auto: unable to find phy
>>> [ 1.209075] HS USB OTG: no transceiver configured
>>> [ 1.214019] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
>>>
>>> and usb isn't working.
>>>
>>> This is probably regression caused by commit: 6c27f939
>>
>> I think a better fix would be to have this merged..
>> https://lkml.org/lkml/2013/7/26/91
> Yes I see but how this could help with current situation? Ho you then
> specify device number?
I was too fast with reply sorry. I can see whole series and it is of
course correct solution. But as I said
can we except to be merged to 3.13. If not Tony can you pick my patch.
> This patch is fixing 3.13-rcx regression.
>
>>>
>>> Signed-off-by: Marek Belisko <marek.belisko@...n-nandra.com>
>>> ---
>>> arch/arm/mach-omap2/twl-common.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
>>> index b0d54da..3640ce0 100644
>>> --- a/arch/arm/mach-omap2/twl-common.c
>>> +++ b/arch/arm/mach-omap2/twl-common.c
>>> @@ -92,7 +92,7 @@ void __init omap_pmic_late_init(void)
>>>
>>> #if defined(CONFIG_ARCH_OMAP3)
>>> struct phy_consumer consumers[] = {
>>> - PHY_CONSUMER("musb-hdrc.0", "usb"),
>>> + PHY_CONSUMER("musb-hdrc.0.auto", "usb"),
>>
>> the index '0' might vary for some boards leading it to again break musb.
> If you run grep for musb-hdrc :
> arch/arm/mach-omap2/board-3430sdp.c: usb_bind_phy("musb-hdrc.0.auto",
> 0, "twl4030_usb");
> arch/arm/mach-omap2/board-devkit8000.c:
> usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
> arch/arm/mach-omap2/board-overo.c: usb_bind_phy("musb-hdrc.0.auto", 0,
> "twl4030_usb");
> arch/arm/mach-omap2/board-omap3beagle.c:
> usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
> arch/arm/mach-omap2/board-omap3touchbook.c:
> usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
> arch/arm/mach-omap2/board-cm-t35.c: usb_bind_phy("musb-hdrc.0.auto",
> 0, "twl4030_usb");
> arch/arm/mach-omap2/board-omap3stalker.c:
> usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
> arch/arm/mach-omap2/board-omap3logic.c:
> usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
> arch/arm/mach-omap2/board-2430sdp.c: usb_bind_phy("musb-hdrc.0.auto",
> 0, "twl4030_usb");
> arch/arm/mach-omap2/board-ldp.c: usb_bind_phy("musb-hdrc.0.auto", 0,
> "twl4030_usb");
> arch/arm/mach-omap2/board-rx51.c: usb_bind_phy("musb-hdrc.0.auto", 0,
> "twl4030_usb");
> arch/arm/mach-omap2/board-omap3pandora.c:
> usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
>
> Until mentioned patch isn't merged and PHY_CONSUMER isn't updated I
> think this is correct solution.
>>
>> Thanks
>> Kishon
>
> BR,
>
> marek
>
> --
> as simple and primitive as possible
> -------------------------------------------------
> Marek Belisko - OPEN-NANDRA
> Freelance Developer
>
> Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
> Tel: +421 915 052 184
> skype: marekwhite
> twitter: #opennandra
> web: http://open-nandra.com
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists