| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1389103548-23458-1-git-send-email-larsi@wh2.tu-dresden.de>
Date: Tue, 7 Jan 2014 15:05:48 +0100
From: Lars Poeschel <larsi@....tu-dresden.de>
To: poeschel@...onage.de, rob.herring@...xeda.com, pawel.moll@....com,
mark.rutland@....com, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, rob@...dley.net, linus.walleij@...aro.org,
gnurou@...il.com, devicetree@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org
Subject: [PATCH] gpio: mcp23s08: Add irq functionality for i2c chips
From: Lars Poeschel <poeschel@...onage.de>
This adds interrupt functionality for i2c chips to the driver.
They can act as a interrupt-controller and generate interrupts, if
the inputs change.
This is tested on a mcp23017 chip.
Signed-off-by: Lars Poeschel <poeschel@...onage.de>
---
.../devicetree/bindings/gpio/gpio-mcp23s08.txt | 21 +-
drivers/gpio/Kconfig | 1 +
drivers/gpio/gpio-mcp23s08.c | 220 ++++++++++++++++++++-
3 files changed, 236 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
index daa3017..b8376f3 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
@@ -38,12 +38,31 @@ Required device specific properties (only for SPI chips):
removed.
- spi-max-frequency = The maximum frequency this chip is able to handle
-Example I2C:
+Optional properties:
+- #interrupt-cells : Should be two.
+ - first cell is the pin number
+ - second cell is used to specify flags.
+- interrupt-controller: Marks the device node as a interrupt controller.
+NOTE: The interrupt functionality is only supported for i2c versions of the
+chips yet.
+
+Optional device specific properties:
+- microchip,irq-mirror: Sets the mirror flag in the IOCON register. This causes
+ devices with two interrupt outputs to always trigger both interrupt
+ outputs regardless where the interrupt happened.
+
+Example I2C (with interrupt):
gpiom1: gpio@20 {
compatible = "microchip,mcp23017";
gpio-controller;
#gpio-cells = <2>;
reg = <0x20>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells=<2>;
+ microchip,irq-mirror;
};
Example SPI:
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0f04444..9fe782a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -697,6 +697,7 @@ config GPIO_MCP23S08
SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
I/O expanders.
This provides a GPIO interface supporting inputs and outputs.
+ The I2C versions of the chips can be used as interrupt-controller.
config GPIO_MC33880
tristate "Freescale MC33880 high-side/low-side switch"
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 2deb0c5..df32b90 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -1,5 +1,10 @@
/*
- * MCP23S08 SPI/GPIO gpio expander driver
+ * MCP23S08 SPI/I2C GPIO gpio expander driver
+ *
+ * The inputs and outputs of the mcp23s08, mcp23s17, mcp23008 and mcp23017 are
+ * supported.
+ * For the I2C versions of the chips (mcp23008 and mcp23017) generation of
+ * interrupts is also supported.
*/
#include <linux/kernel.h>
@@ -12,7 +17,8 @@
#include <linux/spi/mcp23s08.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
-#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
#include <linux/of_device.h>
/**
@@ -34,6 +40,7 @@
#define MCP_DEFVAL 0x03
#define MCP_INTCON 0x04
#define MCP_IOCON 0x05
+# define IOCON_MIRROR (1 << 6)
# define IOCON_SEQOP (1 << 5)
# define IOCON_HAEN (1 << 3)
# define IOCON_ODR (1 << 2)
@@ -57,8 +64,13 @@ struct mcp23s08 {
u8 addr;
u16 cache[11];
+ u16 irq_rise;
+ u16 irq_fall;
+ int irq;
/* lock protects the cached values */
struct mutex lock;
+ struct mutex irq_lock;
+ struct irq_domain *irq_domain;
struct gpio_chip chip;
@@ -316,6 +328,179 @@ mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value)
}
/*----------------------------------------------------------------------*/
+static irqreturn_t mcp23s08_irq(int irq, void *data)
+{
+ struct mcp23s08 *mcp = data;
+ int intcap, intf, i;
+ unsigned int virq;
+
+ mutex_lock(&mcp->lock);
+ intf = mcp->ops->read(mcp, MCP_INTF);
+ if (intf < 0) {
+ mutex_unlock(&mcp->lock);
+ return IRQ_HANDLED;
+ }
+
+ mcp->cache[MCP_INTF] = intf;
+
+ intcap = mcp->ops->read(mcp, MCP_INTCAP);
+ if (intcap < 0) {
+ mutex_unlock(&mcp->lock);
+ return IRQ_HANDLED;
+ }
+
+ mcp->cache[MCP_INTCAP] = intcap;
+ mutex_unlock(&mcp->lock);
+
+
+ for (i = 0; i < mcp->chip.ngpio; i++) {
+ if ((BIT(i) & mcp->cache[MCP_INTF]) &&
+ ((BIT(i) & intcap & mcp->irq_rise) ||
+ (mcp->irq_fall & ~intcap & BIT(i)))) {
+ virq = irq_find_mapping(mcp->irq_domain, i);
+ handle_nested_irq(virq);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int mcp23s08_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
+
+ return irq_create_mapping(mcp->irq_domain, offset);
+}
+
+static void mcp23s08_irq_mask(struct irq_data *data)
+{
+ struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+ unsigned int pos = data->hwirq;
+
+ mcp->cache[MCP_GPINTEN] &= ~BIT(pos);
+}
+
+static void mcp23s08_irq_unmask(struct irq_data *data)
+{
+ struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+ unsigned int pos = data->hwirq;
+
+ mcp->cache[MCP_GPINTEN] |= BIT(pos);
+}
+
+static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+ unsigned int pos = data->hwirq;
+ int status = 0;
+
+ if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+ mcp->cache[MCP_INTCON] &= ~BIT(pos);
+ mcp->irq_rise |= BIT(pos);
+ mcp->irq_fall |= BIT(pos);
+ } else if (type & IRQ_TYPE_EDGE_RISING) {
+ mcp->cache[MCP_INTCON] &= ~BIT(pos);
+ mcp->irq_rise |= BIT(pos);
+ mcp->irq_fall &= ~BIT(pos);
+ } else if (type & IRQ_TYPE_EDGE_FALLING) {
+ mcp->cache[MCP_INTCON] &= ~BIT(pos);
+ mcp->irq_rise &= ~BIT(pos);
+ mcp->irq_fall |= BIT(pos);
+ } else
+ return -EINVAL;
+
+ return status;
+}
+
+static void mcp23s08_irq_bus_lock(struct irq_data *data)
+{
+ struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&mcp->irq_lock);
+}
+
+static void mcp23s08_irq_bus_unlock(struct irq_data *data)
+{
+ struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&mcp->lock);
+ mcp->ops->write(mcp, MCP_GPINTEN, mcp->cache[MCP_GPINTEN]);
+ mcp->ops->write(mcp, MCP_DEFVAL, mcp->cache[MCP_DEFVAL]);
+ mcp->ops->write(mcp, MCP_INTCON, mcp->cache[MCP_INTCON]);
+ mutex_unlock(&mcp->lock);
+ mutex_unlock(&mcp->irq_lock);
+}
+
+static struct irq_chip mcp23s08_irq_chip = {
+ .name = "gpio-mcp23xxx",
+ .irq_mask = mcp23s08_irq_mask,
+ .irq_unmask = mcp23s08_irq_unmask,
+ .irq_set_type = mcp23s08_irq_set_type,
+ .irq_bus_lock = mcp23s08_irq_bus_lock,
+ .irq_bus_sync_unlock = mcp23s08_irq_bus_unlock,
+};
+
+static int mcp23s08_irq_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, domain->host_data);
+ irq_set_chip(irq, &mcp23s08_irq_chip);
+ irq_set_nested_thread(irq, true);
+
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ irq_set_noprobe(irq);
+#endif
+ return 0;
+}
+
+static const struct irq_domain_ops mcp23s08_irq_domain_ops = {
+ .map = mcp23s08_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int mcp23s08_irq_setup(struct mcp23s08 *mcp, struct device *dev)
+{
+ struct gpio_chip *chip = &mcp->chip;
+ int err;
+
+ mutex_init(&mcp->irq_lock);
+
+ mcp->irq_domain = irq_domain_add_linear(chip->of_node, chip->ngpio,
+ &mcp23s08_irq_domain_ops, mcp);
+ if (!mcp->irq_domain)
+ return -ENODEV;
+
+ err = devm_request_threaded_irq(dev, mcp->irq, NULL, mcp23s08_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ dev_name(chip->dev), mcp);
+ if (err != 0) {
+ dev_err(chip->dev, "unable to request IRQ#%d: %d\n",
+ mcp->irq, err);
+ return err;
+ }
+
+ chip->to_irq = mcp23s08_gpio_to_irq;
+ return 0;
+}
+
+static void mcp23s08_irq_teardown(struct mcp23s08 *mcp)
+{
+ unsigned int irq, i;
+
+ free_irq(mcp->irq, mcp);
+
+ for (i = 0; i < mcp->chip.ngpio; i++) {
+ irq = irq_find_mapping(mcp->irq_domain, i);
+ if (irq > 0)
+ irq_dispose_mapping(irq);
+ }
+
+ irq_domain_remove(mcp->irq_domain);
+}
+
+/*----------------------------------------------------------------------*/
#ifdef CONFIG_DEBUG_FS
@@ -370,10 +555,11 @@ done:
/*----------------------------------------------------------------------*/
static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
- void *data, unsigned addr,
- unsigned type, unsigned base, unsigned pullups)
+ void *data, unsigned addr, unsigned type,
+ unsigned base, unsigned pullups)
{
int status;
+ struct property *mirror;
mutex_init(&mcp->lock);
@@ -432,13 +618,21 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
* and MCP_IOCON.HAEN = 1, so we work with all chips.
*/
+
status = mcp->ops->read(mcp, MCP_IOCON);
if (status < 0)
goto fail;
- if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN)) {
+
+ mirror = of_find_property(mcp->chip.of_node,
+ "microchip,irq-mirror", NULL);
+ if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror) {
/* mcp23s17 has IOCON twice, make sure they are in sync */
status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
status |= IOCON_HAEN | (IOCON_HAEN << 8);
+ status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8));
+ if (mirror)
+ status |= IOCON_MIRROR | (IOCON_MIRROR << 8);
+
status = mcp->ops->write(mcp, MCP_IOCON, status);
if (status < 0)
goto fail;
@@ -469,7 +663,17 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
goto fail;
}
+ if (mcp->irq &&
+ of_find_property(mcp->chip.of_node, "interrupt-controller", NULL)) {
+ status = mcp23s08_irq_setup(mcp, dev);
+ if (status) {
+ mcp23s08_irq_teardown(mcp);
+ goto fail;
+ }
+ }
+
status = gpiochip_add(&mcp->chip);
+
fail:
if (status < 0)
dev_dbg(dev, "can't setup chip %d, --> %d\n",
@@ -546,6 +750,7 @@ static int mcp230xx_probe(struct i2c_client *client,
if (match || !pdata) {
base = -1;
pullups = 0;
+ client->irq = irq_of_parse_and_map(client->dev.of_node, 0);
} else {
if (!gpio_is_valid(pdata->base)) {
dev_dbg(&client->dev, "invalid platform data\n");
@@ -559,6 +764,7 @@ static int mcp230xx_probe(struct i2c_client *client,
if (!mcp)
return -ENOMEM;
+ mcp->irq = client->irq;
status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
id->driver_data, base, pullups);
if (status)
@@ -583,6 +789,10 @@ static int mcp230xx_remove(struct i2c_client *client)
if (status == 0)
kfree(mcp);
+ if (client->irq &&
+ of_find_property(mcp->chip.of_node, "interrupt-controller", NULL))
+ mcp23s08_irq_teardown(mcp);
+
return status;
}
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists