| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.44L0.1401081102040.1659-100000@iolanthe.rowland.org>
Date: Wed, 8 Jan 2014 11:08:08 -0500 (EST)
From: Alan Stern <stern@...land.harvard.edu>
To: Daniel Vetter <daniel.vetter@...ll.ch>
cc: intel-gfx <intel-gfx@...ts.freedesktop.org>,
Kernel development list <linux-kernel@...r.kernel.org>
Subject: Re: Excessive WARN()s in Intel 915 driver
On Tue, 7 Jan 2014, Daniel Vetter wrote:
> I really want users to report these issues, and excessive WARNs seems
> to be the only way to get those reports. Please boot with
> drm.debug=0xe added to your kernel cmdline and reproduce this issues.
> Also, which precise kernel are you running? Testing latest -rc is
> always recommended, this state checker code is fairly new and gets
> constantly extended and bugs fixed ...
Here you go. This is the dmesg output after booting with
drm.debug=0xe. Pay no attention to the "AS" suffix in the version
string; this is pristine 3.13-rc7.
Alan Stern
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc7AS (stern@...hir.localdomain) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP PREEMPT Wed Jan 8 10:10:57 EST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dd9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007dda0000-0x000000007ddaefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ddaf000-0x000000007dddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007dde0000-0x000000007ddfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7dda0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
[ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 2014M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[ 0.000000] [mem 0x36400000-0x367fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[ 0.000000] [mem 0x30000000-0x363fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[ 0.000000] [mem 0x36800000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01055000, 0x01055fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36a6a000-0x3752cfff]
[ 0.000000] ACPI: RSDP 000f9180 000024 (v02 110209)
[ 0.000000] ACPI: XSDT 7dda0100 00008C (v01 _ASUS_ Notebook 20091102 MSFT 00000097)
[ 0.000000] ACPI: FACP 7dda0290 0000F4 (v03 110209 FACP1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7dda0680 00CF1B (v01 UL20A UL20A207 00000207 INTL 20051117)
[ 0.000000] ACPI: FACS 7ddaf000 000040
[ 0.000000] ACPI: APIC 7dda0390 00005C (v01 110209 APIC1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7dda0430 00003C (v01 110209 OEMMCFG 20091102 MSFT 00000097)
[ 0.000000] ACPI: SLIC 7dda0470 000176 (v01 _ASUS_ Notebook 20091102 MSFT 00000097)
[ 0.000000] ACPI: ECDT 7dda0620 000054 (v01 110209 OEMECDT 20091102 MSFT 00000097)
[ 0.000000] ACPI: DBGP 7dda03f0 000034 (v01 110209 DBGP1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: BOOT 7dda05f0 000028 (v01 110209 BOOT1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ddaf040 000071 (v01 110209 OEMB1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ddad5a0 000038 (v01 110209 OEMHPET 20091102 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7ddaf0c0 002024 (v01 110209 GMCHSCI 20091102 MSFT 00000097)
[ 0.000000] ACPI: DMAR 7ddb10f0 000150 (v01 110209 DMAR1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: ATKG 7ddb1440 008024 (v01 _ASUS_ OEMATKG 20091102 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ddb9f10 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01056000, 0x01056fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7dd9ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x7dd9ffff]
[ 0.000000] On node 0 totalpages: 515389
[ 0.000000] free_area_init_node: node 0, pgdat c0a0c200, node_mem_map f5aaa020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2252 pages used for memmap
[ 0.000000] HighMem zone: 288162 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfed1ffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f77c3000 s30464 r0 d22784 u53248
[ 0.000000] pcpu-alloc: s30464 r0 d22784 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513613
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/test-3.x root=/dev/sda6 ro drm.debug=0xe acpi_backlight=vendor no_console_suspend rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=us vconsole.font=latarcyrheb-sun16 rd.luks=0 LANG=en_US.UTF-8 2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 4123896 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007dda0)
[ 0.000000] Memory: 2016628K/2061556K available (4026K kernel code, 319K rwdata, 1868K rodata, 392K init, 5980K bss, 44928K reserved, 1152648K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffe6e000 - 0xfffff000 (1604 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0a13000 - 0xc0a75000 ( 392 kB)
.data : 0xc07eedb5 - 0xc0a12c80 (2191 kB)
.text : 0xc0400000 - 0xc07eedb5 (4027 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3567 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1300.034 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2600.06 BogoMIPS (lpj=5200136)
[ 0.004263] pid_max: default: 32768 minimum: 301
[ 0.008131] Security Framework initialized
[ 0.008264] SELinux: Initializing.
[ 0.008481] SELinux: Starting in permissive mode
[ 0.008515] Mount-cache hash table entries: 512
[ 0.010261] Initializing cgroup subsys memory
[ 0.010425] Initializing cgroup subsys devices
[ 0.010582] Initializing cgroup subsys freezer
[ 0.010735] Initializing cgroup subsys blkio
[ 0.010865] Initializing cgroup subsys perf_event
[ 0.011083] CPU: Physical Processor ID: 0
[ 0.011212] CPU: Processor Core ID: 0
[ 0.011342] mce: CPU supports 6 MCE banks
[ 0.011478] CPU0: Thermal monitoring enabled (TM2)
[ 0.011624] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.012213] Freeing SMP alternatives memory: 12K (c0a75000 - c0a78000)
[ 0.012348] ACPI: Core revision 20131115
[ 0.037530] ACPI: All ACPI Tables successfully acquired
[ 0.040598] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.041314] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082682] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz (fam: 06, model: 17, stepping: 0a)
[ 0.084000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.084000] ... version: 2
[ 0.084000] ... bit width: 40
[ 0.084000] ... generic registers: 2
[ 0.084000] ... value mask: 000000ffffffffff
[ 0.084000] ... max period: 000000007fffffff
[ 0.084000] ... fixed-purpose events: 3
[ 0.084000] ... event mask: 0000000700000003
[ 0.112484] CPU 1 irqstacks, hard=f50c6000 soft=f50d0000
[ 0.112489] x86: Booting SMP configuration:
[ 0.008000] Initializing CPU#1
[ 0.124450] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.112620] .... node #0, CPUs: #1
[ 0.124884] x86: Booted up 1 node, 2 CPUs
[ 0.125132] smpboot: Total of 2 processors activated (5200.13 BogoMIPS)
[ 0.128808] devtmpfs: initialized
[ 0.132402] PM: Registering ACPI NVS region [mem 0x7ddaf000-0x7dddffff] (200704 bytes)
[ 0.132996] RTC time: 15:45:57, date: 01/08/14
[ 0.133524] NET: Registered protocol family 16
[ 0.136091] cpuidle: using governor ladder
[ 0.136223] cpuidle: using governor menu
[ 0.136732] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.136964] ACPI: bus type PCI registered
[ 0.137333] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.137544] PCI: not using MMCONFIG
[ 0.137932] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.138065] PCI: Using configuration type 1 for base access
[ 0.144460] bio: create slab <bio-0> at 0
[ 0.144642] ACPI: Added _OSI(Module Device)
[ 0.144642] ACPI: Added _OSI(Processor Device)
[ 0.146549] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.146680] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.163847] ACPI : EC: EC description table is found, configuring boot EC
[ 0.190713] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.201882] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.212448] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x1F, should be 0x25 (20131115/tbprint-214)
[ 0.213558] ACPI: SSDT 7ddb9540 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.217888] ACPI: Dynamic OEM Table Load:
[ 0.218110] ACPI: SSDT (null) 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.218822] ACPI: SSDT 7ddb97a0 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.223095] ACPI: Dynamic OEM Table Load:
[ 0.223318] ACPI: SSDT (null) 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.224462] ACPI: SSDT 7ddb9470 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.228775] ACPI: Dynamic OEM Table Load:
[ 0.228998] ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.229604] ACPI: SSDT 7ddb9710 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.233927] ACPI: Dynamic OEM Table Load:
[ 0.234150] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.235498] ACPI: Interpreter enabled
[ 0.235668] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.235979] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.236338] ACPI: (supports S0 S3 S4 S5)
[ 0.236467] ACPI: Using IOAPIC for interrupt routing
[ 0.236702] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.244890] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.245102] PCI: Using MMCONFIG for extended config space
[ 0.245274] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.246803] ACPI: No dock devices found.
[ 0.293206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.293351] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[ 0.293969] acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control
[ 0.295415] PCI host bridge to bus 0000:00
[ 0.295551] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.295685] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.295821] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.295957] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.296012] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.296148] pci_bus 0000:00: root bus resource [mem 0x7de00000-0xffffffff]
[ 0.296376] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.296993] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.297034] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.297060] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.297079] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
[ 0.297634] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.297669] pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit]
[ 0.298218] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.298336] pci 0000:00:1a.0: reg 0x20: [io 0xd880-0xd89f]
[ 0.298846] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.299129] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.299248] pci 0000:00:1a.1: reg 0x20: [io 0xd800-0xd81f]
[ 0.299700] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.300096] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.300215] pci 0000:00:1a.2: reg 0x20: [io 0xd480-0xd49f]
[ 0.300670] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.300976] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.301030] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.301261] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.301807] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.302104] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.302152] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.302358] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.302655] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.302938] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.303149] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.303587] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.303800] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.304119] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.304405] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.304524] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.304980] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.305278] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.305397] pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f]
[ 0.305859] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.306143] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.306262] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f]
[ 0.306717] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.307020] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.307075] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fb800-0xfe9fbbff]
[ 0.307305] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.307790] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.308085] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.308491] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.308766] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.309395] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.309454] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07]
[ 0.309479] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883]
[ 0.309504] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807]
[ 0.309528] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483]
[ 0.309553] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc41f]
[ 0.309578] pci 0000:00:1f.2: reg 0x24: [mem 0xfe9fb000-0xfe9fb7ff]
[ 0.309725] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.310479] pci 0000:01:00.0: [8086:0083] type 00 class 0x028000
[ 0.310653] pci 0000:01:00.0: reg 0x10: [mem 0xfeafe000-0xfeafffff 64bit]
[ 0.311446] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.311731] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.311877] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.312159] pci 0000:02:00.0: [1969:1062] type 00 class 0x020000
[ 0.312214] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.312244] pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.312480] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.312581] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.312831] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.312970] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.312982] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.313238] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.313398] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.313405] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.313412] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.313419] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.313426] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode)
[ 0.313521] pci_bus 0000:00: on NUMA node 0
[ 0.319042] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.319893] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *10 12)
[ 0.320613] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.321134] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 12)
[ 0.321888] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.322502] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12)
[ 0.323303] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 12)
[ 0.324127] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.327073] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.327312] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.327723] Found 1 acpi root devices
[ 0.328303] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.328918] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.328918] vgaarb: loaded
[ 0.328918] vgaarb: bridge control possible 0000:00:02.0
[ 0.328918] SCSI subsystem initialized
[ 0.329126] libata version 3.00 loaded.
[ 0.329126] PCI: Using ACPI for IRQ routing
[ 0.329126] PCI: pci_cache_line_size set to 64 bytes
[ 0.329126] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.329126] e820: reserve RAM buffer [mem 0x7dda0000-0x7fffffff]
[ 0.332156] cfg80211: Calling CRDA to update world regulatory domain
[ 0.332391] NetLabel: Initializing
[ 0.332509] NetLabel: domain hash size = 128
[ 0.332637] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.332852] NetLabel: unlabeled traffic allowed by default
[ 0.333052] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.333052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.333052] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.336116] Switched to clocksource hpet
[ 0.336778] pnp: PnP ACPI init
[ 0.336976] ACPI: bus type PNP registered
[ 0.337297] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.337484] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.337581] pnp 00:01: [dma 4]
[ 0.337672] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.337807] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.337995] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.338240] pnp 00:04: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.338351] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.338471] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.339063] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.339196] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.339284] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.339420] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.339557] system 00:07: [mem 0xfe9fac00-0xfe9facff window] has been reserved
[ 0.339768] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.339906] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.340065] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.340203] system 00:07: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.340341] system 00:07: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.340479] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.340616] system 00:07: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.340754] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.340891] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.341034] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.341317] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.341621] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.341762] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.341904] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342162] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.342305] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342587] system 00:0b: [io 0x0250-0x0253] has been reserved
[ 0.342725] system 00:0b: [io 0x0256-0x025f] has been reserved
[ 0.342863] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.343000] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.343137] system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.343275] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.343416] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.343707] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.343850] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.345070] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.345211] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.345351] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.345490] system 00:0d: [mem 0x00100000-0x7ddfffff] could not be reserved
[ 0.345633] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.346136] pnp: PnP ACPI: found 14 devices
[ 0.346266] ACPI: bus type PNP unregistered
[ 0.390735] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.390764] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.390777] pci 0000:00:1c.5: BAR 9: assigned [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.390990] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.391131] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.391282] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.391416] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.391558] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.391698] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.391917] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.392093] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.392099] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.392106] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.392112] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.392118] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.392125] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.392131] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.392138] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.392144] pci_bus 0000:02: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.392151] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.392157] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.392163] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.392170] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.392176] pci_bus 0000:03: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.392273] NET: Registered protocol family 2
[ 0.393168] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.393386] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.394720] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.394927] TCP: reno registered
[ 0.395061] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.395353] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.396043] NET: Registered protocol family 1
[ 0.396204] pci 0000:00:02.0: Boot video device
[ 0.396522] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 0.396528] pci 0000:00:1a.0: Performing full reset
[ 0.397085] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.397091] pci 0000:00:1a.1: Performing full reset
[ 0.397645] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.397651] pci 0000:00:1a.2: Performing full reset
[ 0.398777] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 0.398783] pci 0000:00:1d.0: Performing full reset
[ 0.399326] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.399332] pci 0000:00:1d.1: Performing full reset
[ 0.399872] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.399878] pci 0000:00:1d.2: Performing full reset
[ 0.400771] PCI: CLS 32 bytes, default 64
[ 0.401196] Unpacking initramfs...
[ 1.027082] Freeing initrd memory: 11020K (f6a6a000 - f752d000)
[ 1.049905] DMA-API: preallocated 65536 debug entries
[ 1.050044] DMA-API: debugging enabled by kernel config
[ 1.050499] Simple Boot Flag at 0x51 set to 0x1
[ 1.051905] Scanning for low memory corruption every 60 seconds
[ 1.053104] audit: initializing netlink socket (disabled)
[ 1.053328] type=2000 audit(1389195958.052:1): initialized
[ 1.054378] bounce pool size: 64 pages
[ 1.060899] VFS: Disk quotas dquot_6.5.2
[ 1.061191] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.063114] fuse init (API version 7.22)
[ 1.063587] msgmni has been set to 1709
[ 1.064137] SELinux: Registering netfilter hooks
[ 1.066479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.066718] io scheduler noop registered
[ 1.066846] io scheduler deadline registered
[ 1.067125] io scheduler cfq registered (default)
[ 1.067731] intel_idle: does not run on family 6 model 23
[ 1.068833] ACPI: AC Adapter [AC0] (on-line)
[ 1.069280] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 1.069569] ACPI: Sleep Button [SLPB]
[ 1.069902] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.076541] ACPI: Lid Switch [LID]
[ 1.076832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.077048] ACPI: Power Button [PWRF]
[ 1.078329] Monitor-Mwait will be used to enter C-1 state
[ 1.078457] Monitor-Mwait will be used to enter C-3 state
[ 1.078481] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.078706] ACPI: acpi_idle registered with cpuidle
[ 1.086098] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.086233] ACPI: Thermal Zone [THRM] (46 C)
[ 1.086582] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.090381] Non-volatile memory driver v1.3
[ 1.090577] Linux agpgart interface v0.103
[ 1.091208] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.093631] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.095821] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.096600] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.096982] [drm] Initialized drm 1.1.0 20060810
[ 1.100932] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv,
[ 1.101136] [drm:intel_detect_pch],
[ 1.101140] No PCH found?
[ 1.101327] [drm] Memory usable by graphics device = 2048M
[ 1.101538] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 1.101543] [drm:i915_gem_gtt_init], GTT stolen size = 32M
[ 1.102803] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7ddaf0e4
[ 1.102822] [drm:intel_opregion_setup], Public ACPI methods supported
[ 1.102828] [drm:intel_opregion_setup], SWSCI supported
[ 1.116421] [drm:swsci_setup], SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (000000c1)
[ 1.116474] [drm:swsci_setup], SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241
[ 1.116480] [drm:intel_opregion_setup], ASLE supported
[ 1.116766] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.116795] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.116930] [drm] Driver supports precise vblank timestamp query.
[ 1.117061] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 1.117069] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d
[ 1.117076] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 1.117083] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 1.117092] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 1.117097] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 71900 1366 1414 1480 1486 768 774 782 806 0x8 0xa
[ 1.117106] [drm:parse_lfp_panel_data], VBT initial LVDS value 4200033c
[ 1.117112] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 1.117117] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.117126] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 1.117132] [drm:parse_mipi], No MIPI BDB found
[ 1.117159] [drm:intel_dsm_pci_probe],
[ 1.117163] no _DSM method for intel device
[ 1.117330] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at 7e000000
[ 1.117720] [drm:intel_modeset_init], 2 display pipes available.
[ 1.117804] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[ 1.117820] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[ 1.117826] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
[ 1.117842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.154948] ACPI: Battery Slot [BAT0] (battery present)
[ 1.204143] [drm:intel_lvds_init], using preferred mode from EDID:
[ 1.204150] [drm:drm_mode_debug_printmodeline],
[ 1.204157] Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.204296] [drm:intel_lvds_init], detected single-link lvds configuration
[ 1.204469] [drm:intel_panel_get_backlight], get backlight PWM = 1398348
[ 1.204478] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 1.204860] [drm:intel_dp_init_connector], Adding DP connector on port D
[ 1.204974] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 1.207521] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 1.207536] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.209912] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
[ 1.209926] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.210029] [drm:intel_tv_init], Integrated TV is not present.
[ 1.210038] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000]
[ 1.216839] [drm:init_status_page], render ring hws offset: 0x00001000
[ 1.216846] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[ 1.216855] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[ 1.216997] [drm:init_status_page], bsd ring hws offset: 0x00024000
[ 1.217004] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[ 1.217012] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072
[ 1.217079] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
[ 1.217118] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[ 1.217141] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[ 1.217150] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[ 1.217160] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: enabled, pipe B
[ 1.217168] [drm:intel_modeset_readout_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe A
[ 1.217177] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[ 1.217184] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: enabled
[ 1.217192] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:DP-1] hw state readout: disabled
[ 1.217201] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 1.217207] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 1.217213] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 1.217218] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.217226] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.217233] [drm:intel_dump_pipe_config], requested mode:
[ 1.217238] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.217246] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.217251] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.217259] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.217266] [drm:intel_dump_pipe_config], port clock: 0
[ 1.217271] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 1.217277] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.217284] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.217290] [drm:intel_dump_pipe_config], ips: 0
[ 1.217295] [drm:intel_dump_pipe_config], double wide: 0
[ 1.217303] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[ 1.217309] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.217314] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.217319] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.217327] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.217334] [drm:intel_dump_pipe_config], requested mode:
[ 1.217339] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 1.217347] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.217352] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.217360] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa
[ 1.217368] [drm:intel_dump_pipe_config], port clock: 72000
[ 1.217373] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 1.217379] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000
[ 1.217385] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.217392] [drm:intel_dump_pipe_config], ips: 0
[ 1.217397] [drm:intel_dump_pipe_config], double wide: 0
[ 1.217404] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.217413] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 1.217421] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.217428] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.217435] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1.217442] [drm:check_crtc_state], [CRTC:3]
[ 1.217449] [drm:check_crtc_state], [CRTC:4]
[ 1.217488] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 1.217494] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 1.217510] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 1.217516] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.217525] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 1.217530] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 1.232065] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.236059] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 1.236067] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.236073] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.236078] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.236443] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.236449] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.236455] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.236461] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 1.236467] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 1.236473] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 1.236480] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[ 1.236485] [drm:drm_setup_crtcs],
[ 1.236491] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 1.236497] [drm:drm_enable_connectors], connector 11 enabled? no
[ 1.236502] [drm:drm_enable_connectors], connector 14 enabled? no
[ 1.236508] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 1.236513] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 1.236519] [drm:drm_target_preferred], found mode 1366x768
[ 1.236524] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 1.236531] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
[ 1.236541] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000
[ 1.236565] [drm:i915_pages_create_for_stolen], offset=0x40000, size=4227072
[ 1.238531] [drm:intelfb_create], allocated 1366x768 fb: 0x00046000, bo f531cb00
[ 1.239226] fbcon: inteldrmfb (fb0) is primary device
[ 1.241255] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.241261] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 1.241265] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 1.241272] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.241279] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.241284] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[ 1.241290] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.241295] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [CRTC:4]
[ 1.241299] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 1.241305] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 1.241312] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[ 1.241322] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[ 1.241328] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 1.241333] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 1.241337] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 1.241341] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 1.241347] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241352] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.241356] [drm:intel_dump_pipe_config], requested mode:
[ 1.241363] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.241367] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.241374] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.241380] [drm:intel_dump_crtc_timings], crtc timings: 71900 1366 1414 1480 1486 768 774 782 806, type: 0x48 flags: 0xa
[ 1.241384] [drm:intel_dump_pipe_config], port clock: 71900
[ 1.241388] [drm:intel_dump_pipe_config], pipe src size: 1366x768
[ 1.241393] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.241398] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.241402] [drm:intel_dump_pipe_config], ips: 0
[ 1.241406] [drm:intel_dump_pipe_config], double wide: 0
[ 1.241595] [drm:i9xx_set_pipeconf], disabling CxSR downclocking
[ 1.241638] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5504
[ 1.241650] [drm:intel_update_fbc], no output, disabling
[ 1.241659] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1366x768]
[ 1.242546] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6
[ 1.242553] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6
[ 1.280134] [drm:intel_update_fbc], disabled per chip default
[ 1.280147] [drm:intel_panel_enable_backlight], pipe A
[ 1.280179] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348
[ 1.280184] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 1.280252] [drm:i965_irq_handler], pipe B underrun
[ 1.280330] [drm:asle_work], No request on ASLC interrupt 0x00000000
[ 1.280346] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.280354] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 1.280361] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.280367] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.280373] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1.280378] [drm:check_crtc_state], [CRTC:3]
[ 1.280404] [drm:check_crtc_state], [CRTC:4]
[ 1.280430] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0)
[ 1.280432] ------------[ cut here ]------------
[ 1.280441] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/i915/intel_display.c:9285 check_crtc_state+0x7d4/0x816()
[ 1.280443] pipe state doesn't match!
[ 1.280446] Modules linked in:
[ 1.280451] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc7AS #1
[ 1.280454] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 1.280468] 00000000 00000000 f507b830 c07e7bc1 c0961c52 f507b848 c042cb79 c0667cba
[ 1.280481] f5142000 00000000 f6db2380 f507b860 c042cbf4 00000009 f507b858 c0961c52
[ 1.280493] f507b874 f507bad4 c0667cba c0960b41 00002445 c0961c52 0445a186 f507b88c
[ 1.280495] Call Trace:
[ 1.280503] [<c07e7bc1>] dump_stack+0x48/0x69
[ 1.280511] [<c042cb79>] warn_slowpath_common+0x5c/0x73
[ 1.280517] [<c0667cba>] ? check_crtc_state+0x7d4/0x816
[ 1.280522] [<c042cbf4>] warn_slowpath_fmt+0x26/0x2a
[ 1.280528] [<c0667cba>] check_crtc_state+0x7d4/0x816
[ 1.280540] [<c06726be>] intel_modeset_check_state+0x305/0x581
[ 1.280546] [<c067295b>] intel_set_mode+0x21/0x2a
[ 1.280552] [<c0672e96>] intel_crtc_set_config+0x532/0x6e5
[ 1.280560] [<c0640437>] drm_mode_set_config_internal+0x39/0x90
[ 1.280566] [<c0634963>] drm_fb_helper_set_par+0x4c/0x88
[ 1.280573] [<c05d838a>] fbcon_init+0x2cd/0x3a9
[ 1.280580] [<c061d8c3>] visual_init+0x9a/0xed
[ 1.280587] [<c061ece9>] do_bind_con_driver+0x142/0x230
[ 1.280594] [<c061eee6>] do_take_over_console+0x10f/0x137
[ 1.280599] [<c05d5168>] do_fbcon_takeover+0x4c/0x8e
[ 1.280605] [<c05d89ba>] fbcon_event_notify+0x26d/0x544
[ 1.280612] [<c0444d77>] ? __blocking_notifier_call_chain+0x1e/0x4a
[ 1.280617] [<c0444c20>] notifier_call_chain+0x25/0x46
[ 1.280622] [<c0444d8b>] __blocking_notifier_call_chain+0x32/0x4a
[ 1.280628] [<c0444daf>] blocking_notifier_call_chain+0xc/0xe
[ 1.280634] [<c05cd919>] fb_notifier_call_chain+0x11/0x13
[ 1.280640] [<c05ce8bf>] register_framebuffer+0x1eb/0x244
[ 1.280646] [<c0634cb2>] drm_fb_helper_initial_config+0x313/0x3a1
[ 1.280653] [<c07ed07c>] ? _raw_spin_unlock_irqrestore+0x33/0x49
[ 1.280661] [<c069c25c>] intel_fbdev_initial_config+0x19/0x1b
[ 1.280667] [<c064b431>] i915_driver_load+0x8f9/0xb15
[ 1.280675] [<c063b8a7>] drm_dev_register+0xdf/0x174
[ 1.280681] [<c063cd4d>] drm_get_pci_dev+0x7c/0xe9
[ 1.280686] [<c0648d2e>] i915_pci_probe+0x5d/0x66
[ 1.280692] [<c05c5769>] pci_device_probe+0x59/0xa2
[ 1.280698] [<c06a1279>] driver_probe_device+0x7f/0x16f
[ 1.280704] [<c06a13ac>] __driver_attach+0x43/0x5f
[ 1.280709] [<c069ff7a>] bus_for_each_dev+0x3e/0x68
[ 1.280715] [<c06a0e73>] driver_attach+0x14/0x16
[ 1.280720] [<c06a1369>] ? driver_probe_device+0x16f/0x16f
[ 1.280725] [<c06a0c0a>] bus_add_driver+0xb7/0x17a
[ 1.280731] [<c06a1843>] driver_register+0x6e/0xa0
[ 1.280736] [<c05c50c1>] __pci_register_driver+0x45/0x48
[ 1.280742] [<c0a3427d>] ? drm_core_init+0xe4/0xe4
[ 1.280748] [<c063ce22>] drm_pci_init+0x68/0xc0
[ 1.280753] [<c0a3427d>] ? drm_core_init+0xe4/0xe4
[ 1.280757] [<c0a342db>] i915_init+0x5e/0x60
[ 1.280763] [<c04003e7>] do_one_initcall+0x79/0x102
[ 1.280769] [<c0440200>] ? param_set_charp+0x7/0xa3
[ 1.280775] [<c0a133b5>] ? loglevel+0x2b/0x2b
[ 1.280780] [<c0440460>] ? parse_args+0x168/0x206
[ 1.280786] [<c0a13ae9>] kernel_init_freeable+0x166/0x1f0
[ 1.280793] [<c07e25d5>] kernel_init+0x8/0xda
[ 1.280799] [<c07edc37>] ret_from_kernel_thread+0x1b/0x28
[ 1.280805] [<c07e25cd>] ? rest_init+0xa1/0xa1
[ 1.280874] ---[ end trace c51b5631285aa705 ]---
[ 1.280879] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 1.280883] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.280887] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.280893] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.280899] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.280903] [drm:intel_dump_pipe_config], requested mode:
[ 1.280909] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 1.280913] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.280920] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.280926] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa
[ 1.280930] [drm:intel_dump_pipe_config], port clock: 72000
[ 1.280934] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 1.280940] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00000000
[ 1.280945] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.280949] [drm:intel_dump_pipe_config], ips: 0
[ 1.280953] [drm:intel_dump_pipe_config], double wide: 0
[ 1.280957] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 1.280961] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.280965] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.280971] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.280977] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.280981] [drm:intel_dump_pipe_config], requested mode:
[ 1.280987] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 1.280991] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.280997] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.281004] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa
[ 1.281008] [drm:intel_dump_pipe_config], port clock: 72000
[ 1.281012] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 1.281017] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000
[ 1.281022] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.281026] [drm:intel_dump_pipe_config], ips: 0
[ 1.281030] [drm:intel_dump_pipe_config], double wide: 0
[ 1.281038] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 1.281045] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 1.281050] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [NOCRTC]
[ 1.281054] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 1.281059] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.281064] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 1.281070] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
[ 1.288131] [drm:i9xx_pfit_disable], disabling pfit, current: 0xa0000000
[ 1.288141] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6
[ 1.288148] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6
[ 1.288167] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.288176] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.288182] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.288188] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1.288193] [drm:check_crtc_state], [CRTC:3]
[ 1.288218] [drm:check_crtc_state], [CRTC:4]
[ 1.288266] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.288273] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.288279] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.299618] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.299625] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.299630] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.310832] Console: switching to colour frame buffer device 170x48
[ 1.310844] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.310851] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.310856] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.463437] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.466223] i915 0000:00:02.0: registered panic notifier
[ 1.469486] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.473319] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.476278] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.483293] loop: module loaded
[ 1.486382] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 1.489510] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.492678] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.495936] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.499318] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.502751] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.506228] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.510056] ahci 0000:00:1f.2: version 3.0
[ 1.510528] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.510660] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.514233] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 1.517840] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.523783] scsi0 : ahci
[ 1.527952] scsi1 : ahci
[ 1.531784] scsi2 : ahci
[ 1.535551] scsi3 : ahci
[ 1.539154] ata1: SATA max UDMA/133 abar m2048@...e9fb000 port 0xfe9fb100 irq 41
[ 1.542690] ata2: DUMMY
[ 1.546191] ata3: DUMMY
[ 1.549662] ata4: DUMMY
[ 1.553514] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.561241] i8042: Detected active multiplexing controller, rev 1.1
[ 1.567115] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.571211] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.574988] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.578691] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.582361] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.586304] mousedev: PS/2 mouse device common for all mice
[ 1.591454] rtc_cmos 00:02: RTC can wake from S4
[ 1.595602] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.599206] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.602856] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 1.606594] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860)
[ 1.610907] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.614651] iTCO_vendor_support: vendor-support=0
[ 1.618776] asus_laptop: Asus Laptop Support version 0.42
[ 1.622839] asus_laptop: UL20A model detected
[ 1.628535] [drm:asle_set_backlight], bclp = 0x800000b3
[ 1.628557] [drm:asle_set_backlight], updating opregion backlight 179/255
[ 1.628581] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 1.628587] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348
[ 1.628594] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 1.628665] [drm:asle_work], No request on ASLC interrupt 0x00000000
[ 1.628729] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
[ 1.633283] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.812982] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.817815] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.822191] TCP: cubic registered
[ 1.826174] Initializing XFRM netlink socket
[ 1.830123] NET: Registered protocol family 17
[ 1.834083] NET: Registered protocol family 15
[ 1.838747] Using IPI No-Shortcut mode
[ 1.843114] registered taskstats version 1
[ 1.848060] Magic number: 14:395:790
[ 1.851828] rtc_cmos 00:02: setting system clock to 2014-01-08 15:45:59 UTC (1389195959)
[ 1.857520] PM: Hibernation image not present or could not be loaded.
[ 1.876113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.884866] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.890737] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.890745] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.946240] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 1.949547] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.958223] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.963822] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.963830] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.968802] ata1.00: configured for UDMA/133
[ 1.973149] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 1.977417] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.977860] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.983912] sd 0:0:0:0: [sda] Write Protect is off
[ 1.989298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.989435] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.056972] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 2.063093] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.066712] Freeing unused kernel memory: 392K (c0a13000 - c0a75000)
[ 2.070492] Write protecting the kernel text: 4028k
[ 2.074049] Write protecting the kernel read-only data: 1872k
[ 2.097273] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.104170] systemd[1]: Running in initial RAM disk.
[ 2.120182] systemd[1]: Failed to insert module 'autofs4'
[ 2.123936] systemd[1]: No hostname configured.
[ 2.127649] systemd[1]: Set hostname to <localhost>.
[ 2.131861] random: systemd urandom read with 21 bits of entropy available
[ 2.135621] systemd[1]: Initializing machine ID from random generator.
[ 2.165749] systemd[1]: Starting Encrypted Volumes.
[ 2.173804] systemd[1]: Reached target Encrypted Volumes.
[ 2.177713] systemd[1]: Starting udev Kernel Socket.
[ 2.185622] systemd[1]: Listening on udev Kernel Socket.
[ 2.189484] systemd[1]: Starting udev Control Socket.
[ 2.197348] systemd[1]: Listening on udev Control Socket.
[ 2.201041] systemd[1]: Starting Journal Socket.
[ 2.208931] systemd[1]: Listening on Journal Socket.
[ 2.212538] systemd[1]: Starting dracut cmdline hook...
[ 2.223093] systemd[1]: Started Load Kernel Modules.
[ 2.226769] systemd[1]: Starting Journal Service...
[ 2.242671] systemd[1]: Started Journal Service.
[ 2.247325] systemd[1]: Starting Sockets.
[ 2.254771] systemd[1]: Reached target Sockets.
[ 2.258310] systemd[1]: Starting Swap.
[ 2.265568] systemd[1]: Reached target Swap.
[ 2.269001] systemd[1]: Starting Local File Systems.
[ 2.276147] systemd[1]: Reached target Local File Systems.
[ 2.479750] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 2.479758] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 2.479763] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 2.520071] systemd-udevd[123]: starting version 197
[ 2.728699] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 600854
[ 2.773630] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[ 3.013971] [drm:i915_gem_open],
[ 3.014272] [drm:intel_crtc_cursor_set], cursor off
[ 3.014289] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 3.014299] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 3.014307] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.014315] [drm:intel_crtc_cursor_set], cursor off
[ 3.014321] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 3.014327] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.014333] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.014395] [drm:i915_gem_open],
[ 3.014435] [drm:intel_crtc_cursor_set], cursor off
[ 3.014441] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 3.014449] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 3.014455] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.014462] [drm:intel_crtc_cursor_set], cursor off
[ 3.014468] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 3.014474] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.014481] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.014531] [drm:i915_gem_open],
[ 3.014818] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 3.014854] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 3.014879] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.014894] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 3.014900] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 3.014918] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 3.014924] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 3.014936] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.032995] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.033010] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.033016] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 3.040162] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.044188] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3.044197] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.044203] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.044208] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3.044563] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.044569] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3.044574] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.044581] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 3.044599] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.044607] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.044612] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 3.052080] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.056212] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3.056221] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.056227] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.056232] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3.056585] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.056590] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3.056596] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.056602] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 3.056625] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 3.056635] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 3.056640] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 3.056647] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[ 3.056656] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 3.056662] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 3.056667] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 3.056673] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[ 3.056932] [drm:drm_mode_addfb], [FB:19]
[ 4.376272] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.651140] random: nonblocking pool is initialized
[ 4.793817] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.293382] systemd-journald[64]: Received SIGTERM
[ 6.883105] type=1404 audit(1389195964.528:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 7.064375] SELinux: 2048 avtab hash slots, 98400 rules.
[ 7.132124] SELinux: 2048 avtab hash slots, 98400 rules.
[ 7.468859] SELinux: 9 users, 15 roles, 4414 types, 249 bools, 1 sens, 1024 cats
[ 7.468870] SELinux: 83 classes, 98400 rules
[ 7.490580] SELinux: Permission attach_queue in class tun_socket not defined in policy.
[ 7.494042] SELinux: the above unknown classes and permissions will be allowed
[ 7.497475] SELinux: Completing initialization.
[ 7.497479] SELinux: Setting up existing superblocks.
[ 7.497698] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.497880] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 7.498075] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 7.498178] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 7.498572] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.498754] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 7.501038] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 7.501195] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 7.501728] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 7.501887] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 7.502035] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 7.502143] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 7.502365] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 7.502525] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 7.502690] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.506640] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 7.506690] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.506708] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.506982] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.507180] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.507248] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.507303] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.507491] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.507566] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.507600] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.507629] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.507704] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.507851] SELinux: initialized (dev sda6, type ext4), uses xattr
[ 7.571818] type=1403 audit(1389195965.216:3): policy loaded auid=4294967295 ses=4294967295
[ 7.683987] systemd[1]: Successfully loaded SELinux policy in 872.450ms.
[ 8.064065] systemd[1]: Relabelled /dev and /run in 49.308ms.
[ 11.770995] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 11.771002] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 11.771008] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 11.834206] systemd-sysctl[287]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/00-system.conf', ignoring.
[ 11.914639] systemd-journald[298]: Vacuuming done, freed 0 bytes
[ 11.987499] systemd-udevd[295]: starting version 201
[ 12.028464] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 12.044151] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 13.774956] ACPI: bus type USB registered
[ 13.779451] usbcore: registered new interface driver usbfs
[ 13.792630] usbcore: registered new interface driver hub
[ 13.803172] usbcore: registered new device driver usb
[ 13.849653] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 13.852889] Copyright(c) 2003-2013 Intel Corporation
[ 13.857583] iwlwifi 0000:01:00.0: irq 42 for MSI/MSI-X
[ 13.925471] iwlwifi 0000:01:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[ 13.984728] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 13.987773] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 13.991511] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 13.994570] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 13.999863] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 14.027776] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 14.066624] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.069784] ehci_hcd: block sizes: qh 80 qtd 96 itd 160 sitd 96
[ 14.073694] uhci_hcd: USB Universal Host Controller Interface driver
[ 14.079899] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 14.083318] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 14.086487] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 14.089673] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.089679] uhci_hcd 0000:00:1a.0: Performing full reset
[ 14.089701] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 14.089828] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 14.093988] usb usb1: default language 0x0409
[ 14.094059] usb usb1: udev 1, busnum 1, minor = 0
[ 14.094066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.097253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.100428] usb usb1: Product: UHCI Host Controller
[ 14.103557] usb usb1: Manufacturer: Linux 3.13.0-rc7AS uhci_hcd
[ 14.106832] usb usb1: SerialNumber: 0000:00:1a.0
[ 14.111737] usb usb1: usb_probe_device
[ 14.111745] usb usb1: configuration #1 chosen from 1 choice
[ 14.112335] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 14.112798] hub 1-0:1.0: usb_probe_interface
[ 14.112805] hub 1-0:1.0: usb_probe_interface - got id
[ 14.112829] hub 1-0:1.0: USB hub found
[ 14.116342] hub 1-0:1.0: 2 ports detected
[ 14.119342] hub 1-0:1.0: standalone hub
[ 14.119348] hub 1-0:1.0: no power switching (usb 1.0)
[ 14.119353] hub 1-0:1.0: individual port over-current protection
[ 14.119361] hub 1-0:1.0: power on to power good time: 2ms
[ 14.119853] hub 1-0:1.0: local power source is good
[ 14.123873] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.123881] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 14.125456] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 14.128452] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 14.131392] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 14.134327] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.134332] uhci_hcd 0000:00:1a.1: Performing full reset
[ 14.134354] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 14.134413] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 14.137582] usb usb2: default language 0x0409
[ 14.137653] usb usb2: udev 1, busnum 2, minor = 128
[ 14.137660] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.140659] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.140824] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.146567] usb usb2: Product: UHCI Host Controller
[ 14.149550] usb usb2: Manufacturer: Linux 3.13.0-rc7AS uhci_hcd
[ 14.152519] usb usb2: SerialNumber: 0000:00:1a.1
[ 14.153842] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[ 14.159885] usb usb2: usb_probe_device
[ 14.159893] usb usb2: configuration #1 chosen from 1 choice
[ 14.159948] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 14.160633] hub 2-0:1.0: usb_probe_interface
[ 14.160640] hub 2-0:1.0: usb_probe_interface - got id
[ 14.160652] hub 2-0:1.0: USB hub found
[ 14.163616] hub 2-0:1.0: 2 ports detected
[ 14.166524] hub 2-0:1.0: standalone hub
[ 14.166529] hub 2-0:1.0: no power switching (usb 1.0)
[ 14.166535] hub 2-0:1.0: individual port over-current protection
[ 14.166542] hub 2-0:1.0: power on to power good time: 2ms
[ 14.166596] hub 2-0:1.0: local power source is good
[ 14.168644] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.168652] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 14.169679] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 14.172648] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 14.172722] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.176014] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 14.191521] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 14.194492] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.194498] uhci_hcd 0000:00:1a.2: Performing full reset
[ 14.194520] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 14.194583] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 14.197752] usb usb3: default language 0x0409
[ 14.197824] usb usb3: udev 1, busnum 3, minor = 256
[ 14.197830] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.200852] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.203876] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.207001] usb usb3: Product: UHCI Host Controller
[ 14.210061] usb usb3: Manufacturer: Linux 3.13.0-rc7AS uhci_hcd
[ 14.213120] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.214046] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 14.231066] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.231477] hub 1-0:1.0: hub_suspend
[ 14.231624] microcode: Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba
[ 14.232216] usb usb1: bus auto-suspend, wakeup 1
[ 14.232233] usb usb1: suspend_rh
[ 14.233872] usb usb3: SerialNumber: 0000:00:1a.2
[ 14.242953] usb usb3: usb_probe_device
[ 14.242962] usb usb3: configuration #1 chosen from 1 choice
[ 14.243024] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 14.243175] hub 3-0:1.0: usb_probe_interface
[ 14.243181] hub 3-0:1.0: usb_probe_interface - got id
[ 14.243194] hub 3-0:1.0: USB hub found
[ 14.246377] hub 3-0:1.0: 2 ports detected
[ 14.249472] hub 3-0:1.0: standalone hub
[ 14.249478] hub 3-0:1.0: no power switching (usb 1.0)
[ 14.249483] hub 3-0:1.0: individual port over-current protection
[ 14.249490] hub 3-0:1.0: power on to power good time: 2ms
[ 14.249546] hub 3-0:1.0: local power source is good
[ 14.251142] usb usb3: usb port2's DeviceRemovable is changed to 1 according to platform information.
[ 14.251149] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 14.251761] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.254981] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 14.258183] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 14.261358] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.261363] uhci_hcd 0000:00:1d.0: Performing full reset
[ 14.261385] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 14.261444] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 14.264803] usb usb4: default language 0x0409
[ 14.264875] usb usb4: udev 1, busnum 4, minor = 384
[ 14.264881] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.267966] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.271141] usb usb4: Product: UHCI Host Controller
[ 14.274513] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00
[ 14.274745] hub 2-0:1.0: port 1: status 0101 change 0001
[ 14.275391] usb usb4: Manufacturer: Linux 3.13.0-rc7AS uhci_hcd
[ 14.278554] usb usb4: SerialNumber: 0000:00:1d.0
[ 14.282114] usb usb4: usb_probe_device
[ 14.282121] usb usb4: configuration #1 chosen from 1 choice
[ 14.282172] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 14.282274] hub 4-0:1.0: usb_probe_interface
[ 14.282280] hub 4-0:1.0: usb_probe_interface - got id
[ 14.282292] hub 4-0:1.0: USB hub found
[ 14.285708] hub 4-0:1.0: 2 ports detected
[ 14.288799] hub 4-0:1.0: standalone hub
[ 14.288805] hub 4-0:1.0: no power switching (usb 1.0)
[ 14.288810] hub 4-0:1.0: individual port over-current protection
[ 14.288817] hub 4-0:1.0: power on to power good time: 2ms
[ 14.288876] hub 4-0:1.0: local power source is good
[ 14.290486] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 14.291225] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.294304] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 14.297433] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 14.300561] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.300567] uhci_hcd 0000:00:1d.1: Performing full reset
[ 14.300589] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 14.300610] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 14.303950] usb usb5: default language 0x0409
[ 14.304057] usb usb5: udev 1, busnum 5, minor = 512
[ 14.304064] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.307134] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.310380] usb usb5: Product: UHCI Host Controller
[ 14.313509] usb usb5: Manufacturer: Linux 3.13.0-rc7AS uhci_hcd
[ 14.316654] ehci-pci: EHCI PCI platform driver
[ 14.316674] usb usb5: SerialNumber: 0000:00:1d.1
[ 14.325058] usb usb5: usb_probe_device
[ 14.325067] usb usb5: configuration #1 chosen from 1 choice
[ 14.325129] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 14.325236] hub 5-0:1.0: usb_probe_interface
[ 14.325242] hub 5-0:1.0: usb_probe_interface - got id
[ 14.325255] hub 5-0:1.0: USB hub found
[ 14.328387] hub 5-0:1.0: 2 ports detected
[ 14.331395] hub 5-0:1.0: standalone hub
[ 14.331400] hub 5-0:1.0: no power switching (usb 1.0)
[ 14.331405] hub 5-0:1.0: individual port over-current protection
[ 14.331412] hub 5-0:1.0: power on to power good time: 2ms
[ 14.331468] hub 5-0:1.0: local power source is good
[ 14.333332] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 14.334037] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.337457] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 14.340544] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 14.343552] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.343557] uhci_hcd 0000:00:1d.2: Performing full reset
[ 14.343578] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 14.343637] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 14.347009] usb usb6: default language 0x0409
[ 14.347082] usb usb6: udev 1, busnum 6, minor = 640
[ 14.347088] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.350384] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.350404] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.350538] hub 3-0:1.0: hub_suspend
[ 14.350880] usb usb3: bus auto-suspend, wakeup 1
[ 14.350885] usb usb3: suspend_rh
[ 14.353469] usb usb6: Product: UHCI Host Controller
[ 14.356630] usb usb6: Manufacturer: Linux 3.13.0-rc7AS uhci_hcd
[ 14.359729] usb usb6: SerialNumber: 0000:00:1d.2
[ 14.364182] usb usb6: usb_probe_device
[ 14.364191] usb usb6: configuration #1 chosen from 1 choice
[ 14.364346] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 14.364456] hub 6-0:1.0: usb_probe_interface
[ 14.364462] hub 6-0:1.0: usb_probe_interface - got id
[ 14.364475] hub 6-0:1.0: USB hub found
[ 14.367645] hub 6-0:1.0: 2 ports detected
[ 14.370769] hub 6-0:1.0: standalone hub
[ 14.370775] hub 6-0:1.0: no power switching (usb 1.0)
[ 14.370780] hub 6-0:1.0: individual port over-current protection
[ 14.370787] hub 6-0:1.0: power on to power good time: 2ms
[ 14.370950] hub 6-0:1.0: local power source is good
[ 14.372120] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 14.372589] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 14.374119] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 14.375302] usb usb1: usb auto-resume
[ 14.375313] usb usb1: wakeup_rh
[ 14.396129] hub 1-0:1.0: hub_resume
[ 14.396556] usb usb1: unregistering interface 1-0:1.0
[ 14.400014] uhci_hcd 0000:00:1a.0: shutdown urb f49b5f80 ep1in-intr
[ 14.403103] usb usb1: usb_disable_device nuking non-ep0 URBs
[ 14.404177] usb usb1: bus auto-suspend, wakeup 0
[ 14.404185] usb usb1: suspend_rh
[ 14.484114] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 14.734560] usb 2-1: skipped 1 descriptor after configuration
[ 14.734570] usb 2-1: skipped 6 descriptors after interface
[ 14.734576] usb 2-1: skipped 1 descriptor after endpoint
[ 14.734582] usb 2-1: skipped 8 descriptors after interface
[ 14.740536] usb 2-1: default language 0x0409
[ 14.762545] usb 2-1: udev 2, busnum 2, minor = 129
[ 14.762554] usb 2-1: New USB device found, idVendor=04f2, idProduct=b036
[ 14.765753] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 14.768840] usb 2-1: Product: USB2.0 0.3M UVC WebCam
[ 14.771875] usb 2-1: Manufacturer: Chicony Electronics Co., Ltd.
[ 14.775023] usb 2-1: SerialNumber: SN0001
[ 14.778965] usb 2-1: usb_probe_device
[ 14.778974] usb 2-1: configuration #1 chosen from 1 choice
[ 14.782562] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 14.787094] usb 2-1: adding 2-1:1.1 (config #1, interface 1)
[ 14.787307] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.787317] usb usb2: unregistering interface 2-0:1.0
[ 14.787335] hub 4-0:1.0: hub_suspend
[ 14.787374] usb usb4: bus auto-suspend, wakeup 1
[ 14.787381] usb usb4: suspend_rh
[ 14.787423] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.787444] hub 5-0:1.0: hub_suspend
[ 14.787475] usb usb5: bus auto-suspend, wakeup 1
[ 14.787481] usb usb5: suspend_rh
[ 14.787532] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.787552] hub 6-0:1.0: hub_suspend
[ 14.787582] usb usb6: bus auto-suspend, wakeup 1
[ 14.787588] usb usb6: suspend_rh
[ 14.787915] uhci_hcd 0000:00:1a.1: shutdown urb f490f200 ep1in-intr
[ 14.787958] usb 2-1: USB disconnect, device number 2
[ 14.790980] usb 2-1: unregistering device
[ 14.790987] usb 2-1: unregistering interface 2-1:1.0
[ 14.793437] usb 2-1: unregistering interface 2-1:1.1
[ 14.793739] usb 2-1: usb_disable_device nuking all URBs
[ 14.801103] usb usb2: usb_disable_device nuking non-ep0 URBs
[ 14.801385] usb usb2: bus auto-suspend, wakeup 0
[ 14.801392] usb usb2: suspend_rh
[ 14.801423] usb usb3: usb auto-resume
[ 14.801434] usb usb3: wakeup_rh
[ 14.824448] hub 3-0:1.0: hub_resume
[ 14.825057] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.825079] usb usb3: unregistering interface 3-0:1.0
[ 14.825664] uhci_hcd 0000:00:1a.2: shutdown urb f48cc480 ep1in-intr
[ 14.826042] usb usb3: usb_disable_device nuking non-ep0 URBs
[ 14.826320] usb usb3: bus auto-suspend, wakeup 0
[ 14.826327] usb usb3: suspend_rh
[ 14.826369] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 14.830298] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 14.833399] ehci-pci 0000:00:1a.7: debug port 1
[ 14.836382] ehci-pci 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 14.836391] ehci-pci 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 14.836609] ehci-pci 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 14.840497] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 14.840504] ehci-pci 0000:00:1a.7: supports USB remote wakeup
[ 14.840536] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 14.843451] ehci-pci 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 14.852073] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 14.855504] usb usb7: default language 0x0409
[ 14.855582] usb usb7: udev 1, busnum 7, minor = 768
[ 14.855589] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 14.858587] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.861587] usb usb7: Product: EHCI Host Controller
[ 14.864531] usb usb7: Manufacturer: Linux 3.13.0-rc7AS ehci_hcd
[ 14.867537] usb usb7: SerialNumber: 0000:00:1a.7
[ 14.872182] usb usb7: usb_probe_device
[ 14.872190] usb usb7: configuration #1 chosen from 1 choice
[ 14.872511] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 14.873004] hub 7-0:1.0: usb_probe_interface
[ 14.873010] hub 7-0:1.0: usb_probe_interface - got id
[ 14.873036] hub 7-0:1.0: USB hub found
[ 14.876349] hub 7-0:1.0: 6 ports detected
[ 14.879183] hub 7-0:1.0: standalone hub
[ 14.879188] hub 7-0:1.0: no power switching (usb 1.0)
[ 14.879193] hub 7-0:1.0: individual port over-current protection
[ 14.879201] hub 7-0:1.0: power on to power good time: 20ms
[ 14.879536] hub 7-0:1.0: local power source is good
[ 14.885456] usb usb7: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.885464] usb usb7: usb port3's DeviceRemovable is changed to 1 according to platform information.
[ 14.885470] usb usb7: usb port6's DeviceRemovable is changed to 1 according to platform information.
[ 14.885476] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 14.886320] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 14.886333] usb usb1: usb auto-resume
[ 14.886339] usb usb1: wakeup_rh
[ 14.912163] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 14.912302] hub 1-0:1.0: usb_probe_interface
[ 14.912308] hub 1-0:1.0: usb_probe_interface - got id
[ 14.912321] hub 1-0:1.0: USB hub found
[ 14.915160] hub 1-0:1.0: 2 ports detected
[ 14.917988] hub 1-0:1.0: standalone hub
[ 14.917994] hub 1-0:1.0: no power switching (usb 1.0)
[ 14.917999] hub 1-0:1.0: individual port over-current protection
[ 14.918006] hub 1-0:1.0: power on to power good time: 2ms
[ 14.918366] hub 1-0:1.0: local power source is good
[ 14.920684] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.920691] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 14.921300] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 14.921313] usb usb2: usb auto-resume
[ 14.921319] usb usb2: wakeup_rh
[ 14.948417] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 14.948672] hub 2-0:1.0: usb_probe_interface
[ 14.948679] hub 2-0:1.0: usb_probe_interface - got id
[ 14.948691] hub 2-0:1.0: USB hub found
[ 14.951597] hub 2-0:1.0: 2 ports detected
[ 14.954458] hub 2-0:1.0: standalone hub
[ 14.954465] hub 2-0:1.0: no power switching (usb 1.0)
[ 14.954470] hub 2-0:1.0: individual port over-current protection
[ 14.954477] hub 2-0:1.0: power on to power good time: 2ms
[ 14.954659] hub 2-0:1.0: local power source is good
[ 14.956839] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.956846] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 14.957251] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 14.957264] usb usb3: usb auto-resume
[ 14.957270] usb usb3: wakeup_rh
[ 14.980148] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 14.980440] hub 3-0:1.0: usb_probe_interface
[ 14.980447] hub 3-0:1.0: usb_probe_interface - got id
[ 14.980458] hub 3-0:1.0: USB hub found
[ 14.983210] hub 3-0:1.0: 2 ports detected
[ 14.986074] hub 3-0:1.0: standalone hub
[ 14.986079] hub 3-0:1.0: no power switching (usb 1.0)
[ 14.986085] hub 3-0:1.0: individual port over-current protection
[ 14.986092] hub 3-0:1.0: power on to power good time: 2ms
[ 14.986497] hub 3-0:1.0: local power source is good
[ 14.988143] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 14.988178] hub 7-0:1.0: port 3: status 0501 change 0001
[ 14.996767] usb usb3: usb port2's DeviceRemovable is changed to 1 according to platform information.
[ 14.996774] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 14.998799] usb usb4: usb auto-resume
[ 14.998806] usb usb4: wakeup_rh
[ 15.020093] hub 4-0:1.0: hub_resume
[ 15.020159] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.020170] usb usb4: unregistering interface 4-0:1.0
[ 15.020181] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.020196] hub 1-0:1.0: hub_suspend
[ 15.020228] usb usb1: bus auto-suspend, wakeup 1
[ 15.020235] usb usb1: suspend_rh
[ 15.020418] uhci_hcd 0000:00:1d.0: shutdown urb f48cc100 ep1in-intr
[ 15.020715] usb usb4: usb_disable_device nuking non-ep0 URBs
[ 15.020753] usb usb4: bus auto-suspend, wakeup 0
[ 15.020760] usb usb4: suspend_rh
[ 15.020788] usb usb5: usb auto-resume
[ 15.020794] usb usb5: wakeup_rh
[ 15.044054] hub 5-0:1.0: hub_resume
[ 15.044135] usb usb5: unregistering interface 5-0:1.0
[ 15.044380] uhci_hcd 0000:00:1d.1: shutdown urb f4824e00 ep1in-intr
[ 15.044709] usb usb5: usb_disable_device nuking non-ep0 URBs
[ 15.044747] usb usb5: bus auto-suspend, wakeup 0
[ 15.044754] usb usb5: suspend_rh
[ 15.044782] usb usb6: usb auto-resume
[ 15.044788] usb usb6: wakeup_rh
[ 15.056073] uhci_hcd 0000:00:1a.1: port 1 portsc 008a,00
[ 15.068084] hub 6-0:1.0: hub_resume
[ 15.068162] usb usb6: unregistering interface 6-0:1.0
[ 15.068726] uhci_hcd 0000:00:1d.2: shutdown urb f4976600 ep1in-intr
[ 15.069805] usb usb6: usb_disable_device nuking non-ep0 URBs
[ 15.069968] usb usb6: bus auto-suspend, wakeup 0
[ 15.069975] usb usb6: suspend_rh
[ 15.070007] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 15.072964] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 15.075722] ehci-pci 0000:00:1d.7: debug port 1
[ 15.079700] ehci-pci 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 15.079711] ehci-pci 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 15.079806] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 15.083714] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 15.083720] ehci-pci 0000:00:1d.7: supports USB remote wakeup
[ 15.083743] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 15.086449] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 15.097049] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 15.100375] usb usb8: default language 0x0409
[ 15.100455] usb usb8: udev 1, busnum 8, minor = 896
[ 15.100462] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.103169] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.105905] usb usb8: Product: EHCI Host Controller
[ 15.108622] usb usb8: Manufacturer: Linux 3.13.0-rc7AS ehci_hcd
[ 15.111325] usb usb8: SerialNumber: 0000:00:1d.7
[ 15.114690] usb usb8: usb_probe_device
[ 15.114698] usb usb8: configuration #1 chosen from 1 choice
[ 15.114951] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 15.115225] hub 8-0:1.0: usb_probe_interface
[ 15.115232] hub 8-0:1.0: usb_probe_interface - got id
[ 15.115246] hub 8-0:1.0: USB hub found
[ 15.118120] hub 8-0:1.0: 6 ports detected
[ 15.120794] hub 8-0:1.0: standalone hub
[ 15.120799] hub 8-0:1.0: no power switching (usb 1.0)
[ 15.120805] hub 8-0:1.0: individual port over-current protection
[ 15.120812] hub 8-0:1.0: power on to power good time: 20ms
[ 15.120995] hub 8-0:1.0: local power source is good
[ 15.127255] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 15.127883] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 15.127895] usb usb4: usb auto-resume
[ 15.127902] usb usb4: wakeup_rh
[ 15.148136] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 15.148382] hub 4-0:1.0: usb_probe_interface
[ 15.148389] hub 4-0:1.0: usb_probe_interface - got id
[ 15.148401] hub 4-0:1.0: USB hub found
[ 15.151079] hub 4-0:1.0: 2 ports detected
[ 15.153710] hub 4-0:1.0: standalone hub
[ 15.153716] hub 4-0:1.0: no power switching (usb 1.0)
[ 15.153721] hub 4-0:1.0: individual port over-current protection
[ 15.153728] hub 4-0:1.0: power on to power good time: 2ms
[ 15.153917] hub 4-0:1.0: local power source is good
[ 15.155428] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 15.155713] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 15.155724] hub 7-0:1.0: state 7 ports 6 chg 0008 evt 0000
[ 15.155727] usb usb5: usb auto-resume
[ 15.155732] usb usb5: wakeup_rh
[ 15.156070] hub 7-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 15.176180] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 15.176296] hub 5-0:1.0: usb_probe_interface
[ 15.176302] hub 5-0:1.0: usb_probe_interface - got id
[ 15.176314] hub 5-0:1.0: USB hub found
[ 15.180314] hub 5-0:1.0: 2 ports detected
[ 15.183117] hub 5-0:1.0: standalone hub
[ 15.183124] hub 5-0:1.0: no power switching (usb 1.0)
[ 15.183129] hub 5-0:1.0: individual port over-current protection
[ 15.183136] hub 5-0:1.0: power on to power good time: 2ms
[ 15.183194] hub 5-0:1.0: local power source is good
[ 15.185836] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 15.186943] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 15.186956] usb usb6: usb auto-resume
[ 15.186963] usb usb6: wakeup_rh
[ 15.208374] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 15.208498] hub 6-0:1.0: usb_probe_interface
[ 15.208505] hub 6-0:1.0: usb_probe_interface - got id
[ 15.208516] hub 6-0:1.0: USB hub found
[ 15.211210] hub 6-0:1.0: 2 ports detected
[ 15.213744] hub 6-0:1.0: standalone hub
[ 15.213749] hub 6-0:1.0: no power switching (usb 1.0)
[ 15.213754] hub 6-0:1.0: individual port over-current protection
[ 15.213761] hub 6-0:1.0: power on to power good time: 2ms
[ 15.213940] hub 6-0:1.0: local power source is good
[ 15.215873] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 15.216350] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled
[ 15.216362] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 15.272199] usb 7-3: new high-speed USB device number 2 using ehci-pci
[ 15.380350] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled
[ 15.380363] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 15.500536] usb 7-3: skipped 1 descriptor after configuration
[ 15.500544] usb 7-3: skipped 6 descriptors after interface
[ 15.500551] usb 7-3: skipped 1 descriptor after endpoint
[ 15.500556] usb 7-3: skipped 8 descriptors after interface
[ 15.501271] usb 7-3: default language 0x0409
[ 15.507268] usb 7-3: udev 2, busnum 7, minor = 769
[ 15.507276] usb 7-3: New USB device found, idVendor=04f2, idProduct=b036
[ 15.510010] usb 7-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 15.512661] usb 7-3: Product: USB2.0 0.3M UVC WebCam
[ 15.516836] usb 7-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 15.519472] usb 7-3: SerialNumber: SN0001
[ 15.522759] usb 7-3: usb_probe_device
[ 15.522767] usb 7-3: configuration #1 chosen from 1 choice
[ 15.523165] usb 7-3: adding 7-3:1.0 (config #1, interface 0)
[ 15.525511] usb 7-3: adding 7-3:1.1 (config #1, interface 1)
[ 15.525720] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.525747] hub 3-0:1.0: hub_suspend
[ 15.525784] usb usb3: bus auto-suspend, wakeup 1
[ 15.525791] usb usb3: suspend_rh
[ 15.525833] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.525854] hub 2-0:1.0: hub_suspend
[ 15.525884] usb usb2: bus auto-suspend, wakeup 1
[ 15.525890] usb usb2: suspend_rh
[ 15.525932] hub 8-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 15.525952] hub 8-0:1.0: hub_suspend
[ 15.525982] usb usb8: bus auto-suspend, wakeup 1
[ 15.525988] ehci-pci 0000:00:1d.7: suspend root hub
[ 15.526078] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.526098] hub 4-0:1.0: hub_suspend
[ 15.526128] usb usb4: bus auto-suspend, wakeup 1
[ 15.526134] usb usb4: suspend_rh
[ 15.526174] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.526194] hub 5-0:1.0: hub_suspend
[ 15.526223] usb usb5: bus auto-suspend, wakeup 1
[ 15.526229] usb usb5: suspend_rh
[ 15.526269] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.526289] hub 6-0:1.0: hub_suspend
[ 15.526319] usb usb6: bus auto-suspend, wakeup 1
[ 15.526325] usb usb6: suspend_rh
[ 16.050303] Adding 8389624k swap on /dev/sda7. Priority:-1 extents:1 across:8389624k
[ 16.246807] SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
[ 16.390038] SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
[ 17.175963] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 17.179267] SELinux: initialized (dev sda8, type ext4), uses xattr
[ 17.694097] systemd-journald[298]: Received request to flush runtime journal from PID 1
[ 22.412016] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 22.419611] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 22.490787] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 22.503096] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 22.505305] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 22.512307] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 22.512723] uhci_hcd 0000:00:1a.1: uhci_pci_suspend
[ 22.513095] uhci_hcd 0000:00:1a.1: hcd_pci_runtime_suspend: 0
[ 22.513433] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
[ 22.513799] uhci_hcd 0000:00:1a.2: hcd_pci_runtime_suspend: 0
[ 22.514282] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[ 22.514650] uhci_hcd 0000:00:1d.0: hcd_pci_runtime_suspend: 0
[ 22.514981] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
[ 22.515347] uhci_hcd 0000:00:1d.1: hcd_pci_runtime_suspend: 0
[ 22.515677] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
[ 22.523715] uhci_hcd 0000:00:1d.2: hcd_pci_runtime_suspend: 0
[ 22.525067] ehci-pci 0000:00:1d.7: hcd_pci_runtime_suspend: 0
[ 22.647745] atl1c 0000:02:00.0: irq 43 for MSI/MSI-X
[ 22.817651] [drm:intel_crtc_cursor_set], cursor off
[ 22.817662] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 22.817673] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 22.817680] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 22.817688] [drm:intel_crtc_cursor_set], cursor off
[ 22.817695] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 22.817701] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 22.817707] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 24.290028] wlan0: authenticate with 00:24:36:a6:21:91
[ 24.310492] wlan0: send auth to 00:24:36:a6:21:91 (try 1/3)
[ 24.315956] wlan0: authenticated
[ 24.324517] wlan0: associate with 00:24:36:a6:21:91 (try 1/3)
[ 24.336898] wlan0: RX AssocResp from 00:24:36:a6:21:91 (capab=0x1431 status=0 aid=13)
[ 24.383120] wlan0: associated
[ 601.053058] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 601.053084] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 601.054092] [drm:asle_work], No request on ASLC interrupt 0x00000000
[ 601.324169] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[ 601.324182] [drm:intel_update_fbc], no output, disabling
[ 601.324200] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 601.324208] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 601.324216] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 601.324224] [drm:check_crtc_state], [CRTC:3]
[ 601.324233] [drm:check_crtc_state], [CRTC:4]
[ 601.324473] [drm:intel_panel_update_status], updating intel_backlight, brightness=1398348/1992060
[ 601.324514] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 601.325511] [drm:asle_set_backlight], bclp = 0x800000b3
[ 601.325519] [drm:asle_set_backlight], updating opregion backlight 179/255
[ 601.325528] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 715.020721] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6
[ 715.020731] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6
[ 715.060163] [drm:intel_update_fbc], disabled per chip default
[ 715.068160] [drm:intel_panel_enable_backlight], pipe A
[ 715.068171] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348
[ 715.068180] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 715.068218] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 715.068231] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 715.068240] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 715.068248] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 715.068255] [drm:check_crtc_state], [CRTC:3]
[ 715.068290] [drm:check_crtc_state], [CRTC:4]
[ 715.068302] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 715.068312] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 715.068320] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 715.068328] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 715.068335] [drm:check_crtc_state], [CRTC:3]
[ 715.068365] [drm:check_crtc_state], [CRTC:4]
[ 715.068385] [drm:intel_panel_update_status], updating intel_backlight, brightness=1398348/1992060
[ 715.068395] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 715.068399] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348
[ 715.068407] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 715.069333] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 715.069344] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 715.069352] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 715.086940] [drm:asle_set_backlight], bclp = 0x800000b3
[ 715.086953] [drm:asle_set_backlight], updating opregion backlight 179/255
[ 715.086966] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 715.086974] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348
[ 715.086985] [drm:intel_panel_get_max_backlight], max backlight PWM = 1992060
[ 715.087020] [drm:asle_work], No request on ASLC interrupt 0x00000000
[ 729.943162] type=1006 audit(1389196687.587:4): pid=543 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists