| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 01 Mar 2014 11:19:34 +0100
From: Otto Meier <gf435@....net>
To: Sarah Sharp <sarah.a.sharp@...ux.intel.com>
CC: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
"Nyman, Mathias" <mathias.nyman@...el.com>,
Dan Williams <dan.j.williams@...el.com>
Subject: Re: [3.14-rc4 xHCI] Regression haswell B85 with xHCI on
Am 28.02.2014 19:49, schrieb Sarah Sharp:
> On Thu, Feb 27, 2014 at 05:17:19PM +0100, Otto Meier wrote:
>> I migrated my system from H77 Ivy-bridge to a haswell Platform
>> B85 i3-4330.
>>
>> The system has three dvb-c usb receivers connected. On the Ivy
>> Platform everything runs fine with xHCI. On the haswell Platform
>> xHCI explodes with following messages:
> Do these DVB-C receivers work with an earlier kernel on this machine?
> If so, that's technically not a regression, but it's still a bug that
> needs to get fixed.
For me regression means that on ivy hardware with series 7 chipset
xhci works fine and on series 8 hardware with haswell xhci explodes.
i have tested so far mainboards with b85, h87 and z87 chipsets from
biostar, gigabyte, msi, and zotac. All have the same Issue.
>
>> 2014-02-27T16:45:53.518332+01:00 vnas kernel: [ 222.218703] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
>> 2014-02-27T16:45:53.518342+01:00 vnas kernel: [ 222.218712] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
>> 2014-02-27T16:45:53.518346+01:00 vnas kernel: [ 222.218808] xhci_hcd 0000:00:14.0: HC died; cleaning up
>> 2014-02-27T16:45:53.518349+01:00 vnas kernel: [ 222.218870] usb 1-1: USB disconnect, device number 2
>> 2014-02-27T16:45:53.518351+01:00 vnas kernel: [ 222.218880] usb 1-1.2: USB disconnect, device number 7
>> 2014-02-27T16:45:53.518353+01:00 vnas kernel: [ 222.218979] em2884 #0: writing to i2c device at 0x52 failed (error=-19)
>> 2014-02-27T16:45:53.518356+01:00 vnas kernel: [ 222.218988] drxk: i2c write error at addr 0x29
>> 2014-02-27T16:45:53.518358+01:00 vnas kernel: [ 222.218993] em2884 #2: writing to i2c device at 0x52 failed (error=-19)
>> 2014-02-27T16:45:53.518361+01:00 vnas kernel: [ 222.218997] drxk: i2c write error at addr 0x29
>> 2014-02-27T16:45:53.518364+01:00 vnas kernel: [ 222.219001] drxk: write_block: i2c write error at addr 0x831ffd
>> 2014-02-27T16:45:53.518366+01:00 vnas kernel: [ 222.219006] drxk: write_block: i2c write error at addr 0x831ffd
>> 2014-02-27T16:45:53.518368+01:00 vnas kernel: [ 222.219012] em2884 #1: writing to i2c device at 0x52 failed (error=-19)
>> 2014-02-27T16:45:53.518371+01:00 vnas kernel: [ 222.219017] drxk: i2c write error at addr 0x29
>> 2014-02-27T16:45:53.518373+01:00 vnas kernel: [ 222.219021] drxk: write_block: i2c write error at addr 0x831ffd
>> 2014-02-27T16:45:53.518375+01:00 vnas kernel: [ 222.219070] em2884 #0: Disconnecting em2884 #0
>> 2014-02-27T16:45:53.518962+01:00 vnas kernel: [ 222.219076] em2884 #0: Closing audio extension
> Can you enable xHCI dynamic debugging (make sure you have
> CONFIG_DYNAMIC_DEBUG turned on), and send us more of the dmesg before
> the host died?
>
> echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control
>
Please find the log attached.
>> This happens when more then one DVB-C receiver is connected.
>> With only one it works.
>>
>> If I disable xHCI Mode in Bios and run only with EHCI.
>> Everything is running fine either.
>>
>> lsusb:
>>
>> Bus 001 Device 002: ID 8087:8008 Intel Corp.
>> Bus 002 Device 002: ID 8087:8000 Intel Corp.
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 002 Device 003: ID 2109:2811
>> Bus 002 Device 004: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
>> Bus 002 Device 005: ID 03eb:201l3 Atmel Corp.
>> Bus 002 Device 006: ID 9e88:9e8f
>> Bus 002 Device 007: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
>> Bus 002 Device 008: ID 2040:1605 Hauppauge
>> Bus 002 Device 009: ID 2040:1605 Hauppauge
>> Bus 002 Device 010: ID 2040:1605 Hauppauge
>> Bus 002 Device 011: ID 04e6:5116 SCM Microsystems, Inc. SCR331-LC1 / SCR3310 SmartCard Reader
>> Bus 002 Device 012: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
>> Bus 002 Device 013: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
>> Bus 002 Device 014: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
>>
>> lspci: xHCI disabled:
>>
>> 00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM
>> Controller (rev 06)
>> 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th
>> Gen Core Processor Integrated Graphics Controller (rev 06)
>> 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core
>> Processor HD Audio Controller (rev 06)
>> 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series
>> Chipset Family MEI Controller #1 (rev 04)
>> 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset
>> Family USB EHCI #2 (rev 05)
>> 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset
>> High Definition Audio Controller (rev 05)
>> 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset
>> Family PCI Express Root Port #1 (rev d5)
>> 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset
>> Family PCI Express Root Port #3 (rev d5)
>> 00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset
>> Family PCI Express Root Port #4 (rev d5)
>> 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset
>> Family USB EHCI #1 (rev 05)
>> 00:1f.0 ISA bridge: Intel Corporation B85 Express LPC Controller (rev 05)
>> 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset
>> Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
>> 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family
>> SMBus Controller (rev 05)
>> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
>> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
>>
>> Any Idea how to fix these?
> I won't know until I see more dmesg.
>
> Sarah Sharp
>
>
I hope this is what you are looking for. If I should test something else
please give me a hint.
Thanks for your support.
Otto
View attachment "messages-debug-xhci.txt" of type "text/plain" (196670 bytes)
Powered by blists - more mailing lists