| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1394047776-13827-3-git-send-email-joshc@codeaurora.org>
Date: Wed, 5 Mar 2014 13:29:32 -0600
From: Josh Cartwright <joshc@...eaurora.org>
To: Alessandro Zummo <a.zummo@...ertech.it>
Cc: linux-arm-msm@...r.kernel.org, Stephen Boyd <sboyd@...eaurora.org>,
rtc-linux@...glegroups.com, linux-kernel@...r.kernel.org
Subject: [PATCH 2/6] rtc: pm8xxx: use regmap API for register accesses
Now that the parent mfd driver has been made to work again, and has been
reworked to create a regmap instance intended for it's children to use,
rework the pm8xxx driver to use the regmap API for it's register
accesses.
Signed-off-by: Josh Cartwright <joshc@...eaurora.org>
---
drivers/rtc/rtc-pm8xxx.c | 145 +++++++++++++++++++----------------------------
1 file changed, 57 insertions(+), 88 deletions(-)
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index 772b070..f6d140a 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -13,11 +13,12 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/rtc.h>
+#include <linux/platform_device.h>
#include <linux/pm.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/mfd/pm8xxx/core.h>
#include <linux/mfd/pm8xxx/rtc.h>
@@ -37,6 +38,7 @@
/**
* struct pm8xxx_rtc - rtc driver internal structure
* @rtc: rtc device for this driver.
+ * @regmap: regmap used to access RTC registers
* @rtc_alarm_irq: rtc alarm irq number.
* @rtc_base: address of rtc control register.
* @rtc_read_base: base address of read registers.
@@ -48,6 +50,7 @@
*/
struct pm8xxx_rtc {
struct rtc_device *rtc;
+ struct regmap *regmap;
int rtc_alarm_irq;
int rtc_base;
int rtc_read_base;
@@ -59,44 +62,6 @@ struct pm8xxx_rtc {
};
/*
- * The RTC registers need to be read/written one byte at a time. This is a
- * hardware limitation.
- */
-static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
- int base, int count)
-{
- int i, rc;
- struct device *parent = rtc_dd->rtc_dev->parent;
-
- for (i = 0; i < count; i++) {
- rc = pm8xxx_readb(parent, base + i, &rtc_val[i]);
- if (rc < 0) {
- dev_err(rtc_dd->rtc_dev, "PMIC read failed\n");
- return rc;
- }
- }
-
- return 0;
-}
-
-static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
- int base, int count)
-{
- int i, rc;
- struct device *parent = rtc_dd->rtc_dev->parent;
-
- for (i = 0; i < count; i++) {
- rc = pm8xxx_writeb(parent, base + i, rtc_val[i]);
- if (rc < 0) {
- dev_err(rtc_dd->rtc_dev, "PMIC write failed\n");
- return rc;
- }
- }
-
- return 0;
-}
-
-/*
* Steps to write the RTC registers.
* 1. Disable alarm if enabled.
* 2. Write 0x00 to LSB.
@@ -107,7 +72,7 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
int rc, i;
unsigned long secs, irq_flags;
- u8 value[NUM_8_BIT_RTC_REGS], reg = 0, alarm_enabled = 0, ctrl_reg;
+ u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0, ctrl_reg;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
rtc_tm_to_time(tm, &secs);
@@ -125,9 +90,8 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
alarm_enabled = 1;
ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
- rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
- 1);
- if (rc < 0) {
+ rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
@@ -137,33 +101,31 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
}
/* Write 0 to Byte[0] */
- reg = 0;
- rc = pm8xxx_write_wrapper(rtc_dd, ®, rtc_dd->rtc_write_base, 1);
- if (rc < 0) {
+ rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, 0);
+ if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
goto rtc_rw_fail;
}
/* Write Byte[1], Byte[2], Byte[3] */
- rc = pm8xxx_write_wrapper(rtc_dd, value + 1,
- rtc_dd->rtc_write_base + 1, 3);
- if (rc < 0) {
+ rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->rtc_write_base + 1,
+ &value[1], sizeof(value) - 1);
+ if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
goto rtc_rw_fail;
}
/* Write Byte[0] */
- rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->rtc_write_base, 1);
- if (rc < 0) {
+ rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, value[0]);
+ if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
goto rtc_rw_fail;
}
if (alarm_enabled) {
ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
- rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
- 1);
- if (rc < 0) {
+ rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
@@ -180,13 +142,14 @@ rtc_rw_fail:
static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
int rc;
- u8 value[NUM_8_BIT_RTC_REGS], reg;
+ u8 value[NUM_8_BIT_RTC_REGS];
unsigned long secs;
+ unsigned int reg;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
- rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base,
- NUM_8_BIT_RTC_REGS);
- if (rc < 0) {
+ rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
+ value, sizeof(value));
+ if (rc) {
dev_err(dev, "RTC read data register failed\n");
return rc;
}
@@ -195,17 +158,16 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
* Read the LSB again and check if there has been a carry over.
* If there is, redo the read operation.
*/
- rc = pm8xxx_read_wrapper(rtc_dd, ®, rtc_dd->rtc_read_base, 1);
+ rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_read_base, ®);
if (rc < 0) {
dev_err(dev, "RTC read data register failed\n");
return rc;
}
if (unlikely(reg < value[0])) {
- rc = pm8xxx_read_wrapper(rtc_dd, value,
- rtc_dd->rtc_read_base,
- NUM_8_BIT_RTC_REGS);
- if (rc < 0) {
+ rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
+ value, sizeof(value));
+ if (rc) {
dev_err(dev, "RTC read data register failed\n");
return rc;
}
@@ -244,9 +206,9 @@ static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
- NUM_8_BIT_RTC_REGS);
- if (rc < 0) {
+ rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+ sizeof(value));
+ if (rc) {
dev_err(dev, "Write to RTC ALARM register failed\n");
goto rtc_rw_fail;
}
@@ -255,8 +217,8 @@ static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
- rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
- if (rc < 0) {
+ rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
@@ -279,9 +241,9 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
unsigned long secs;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
- rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
- NUM_8_BIT_RTC_REGS);
- if (rc < 0) {
+ rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+ sizeof(value));
+ if (rc) {
dev_err(dev, "RTC alarm time read failed\n");
return rc;
}
@@ -316,8 +278,8 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
ctrl_reg = enable ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
- rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
- if (rc < 0) {
+ rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
@@ -339,7 +301,7 @@ static struct rtc_class_ops pm8xxx_rtc_ops = {
static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
{
struct pm8xxx_rtc *rtc_dd = dev_id;
- u8 ctrl_reg;
+ unsigned int ctrl_reg;
int rc;
unsigned long irq_flags;
@@ -351,8 +313,8 @@ static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
ctrl_reg = rtc_dd->ctrl_reg;
ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
- rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
- if (rc < 0) {
+ rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ if (rc) {
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
dev_err(rtc_dd->rtc_dev,
"Write to RTC control register failed\n");
@@ -363,18 +325,20 @@ static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
/* Clear RTC alarm register */
- rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
- PM8XXX_ALARM_CTRL_OFFSET, 1);
- if (rc < 0) {
+ rc = regmap_read(rtc_dd->regmap,
+ rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
+ &ctrl_reg);
+ if (rc) {
dev_err(rtc_dd->rtc_dev,
"RTC Alarm control register read failed\n");
goto rtc_alarm_handled;
}
ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
- rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
- PM8XXX_ALARM_CTRL_OFFSET, 1);
- if (rc < 0)
+ rc = regmap_write(rtc_dd->regmap,
+ rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
+ ctrl_reg);
+ if (rc)
dev_err(rtc_dd->rtc_dev,
"Write to RTC Alarm control register failed\n");
@@ -385,7 +349,7 @@ rtc_alarm_handled:
static int pm8xxx_rtc_probe(struct platform_device *pdev)
{
int rc;
- u8 ctrl_reg;
+ unsigned int ctrl_reg;
bool rtc_write_enable = false;
struct pm8xxx_rtc *rtc_dd;
struct resource *rtc_resource;
@@ -402,6 +366,12 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
/* Initialise spinlock to protect RTC control register */
spin_lock_init(&rtc_dd->ctrl_reg_lock);
+ rtc_dd->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!rtc_dd->regmap) {
+ dev_err(&pdev->dev, "Parent regmap unavailable.\n");
+ return -ENXIO;
+ }
+
rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
if (rtc_dd->rtc_alarm_irq < 0) {
dev_err(&pdev->dev, "Alarm IRQ resource absent!\n");
@@ -425,17 +395,16 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
rtc_dd->rtc_dev = &pdev->dev;
/* Check if the RTC is on, else turn it on */
- rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
- if (rc < 0) {
+ rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_base, &ctrl_reg);
+ if (rc) {
dev_err(&pdev->dev, "RTC control register read failed!\n");
return rc;
}
if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
ctrl_reg |= PM8xxx_RTC_ENABLE;
- rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
- 1);
- if (rc < 0) {
+ rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ if (rc) {
dev_err(&pdev->dev,
"Write to RTC control register failed\n");
return rc;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists