| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1394650983-24780-4-git-send-email-soren.brinkmann@xilinx.com>
Date: Wed, 12 Mar 2014 12:02:57 -0700
From: Soren Brinkmann <soren.brinkmann@...inx.com>
To: Russell King <linux@....linux.org.uk>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.cz>,
One Thousand Gnomes <gnomes@...rguk.ukuu.org.uk>
Cc: Michal Simek <michal.simek@...inx.com>,
Peter Crosthwaite <peter.crosthwaite@...inx.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-serial@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Rob Landley <rob@...dley.net>,
Grant Likely <grant.likely@...aro.org>,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
Soren Brinkmann <soren.brinkmann@...inx.com>
Subject: [PATCH v3 3/9] tty: xuartps: Clean up
This is all white space and comment clean up. Mostly reformatting
comments.
Signed-off-by: Soren Brinkmann <soren.brinkmann@...inx.com>
---
drivers/tty/serial/xilinx_uartps.c | 210 +++++++++++++------------------------
1 file changed, 74 insertions(+), 136 deletions(-)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 2cd0cd456c7a..787a12064fa0 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1,14 +1,13 @@
/*
* Xilinx PS UART driver
*
- * 2011 - 2013 (C) Xilinx Inc.
+ * 2011 - 2014 (C) Xilinx Inc.
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General Public
* License as published by the Free Software Foundation;
* either version 2 of the License, or (at your option) any
* later version.
- *
*/
#if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -49,39 +48,27 @@ static int rx_timeout = 10;
module_param(rx_timeout, uint, S_IRUGO);
MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
-/********************************Register Map********************************/
-/** UART
- *
- * Register offsets for the UART.
- *
- */
-#define XUARTPS_CR_OFFSET 0x00 /* Control Register [8:0] */
-#define XUARTPS_MR_OFFSET 0x04 /* Mode Register [10:0] */
-#define XUARTPS_IER_OFFSET 0x08 /* Interrupt Enable [10:0] */
-#define XUARTPS_IDR_OFFSET 0x0C /* Interrupt Disable [10:0] */
-#define XUARTPS_IMR_OFFSET 0x10 /* Interrupt Mask [10:0] */
-#define XUARTPS_ISR_OFFSET 0x14 /* Interrupt Status [10:0]*/
-#define XUARTPS_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator [15:0] */
-#define XUARTPS_RXTOUT_OFFSET 0x1C /* RX Timeout [7:0] */
-#define XUARTPS_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level [5:0] */
-#define XUARTPS_MODEMCR_OFFSET 0x24 /* Modem Control [5:0] */
-#define XUARTPS_MODEMSR_OFFSET 0x28 /* Modem Status [8:0] */
-#define XUARTPS_SR_OFFSET 0x2C /* Channel Status [11:0] */
-#define XUARTPS_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
-#define XUARTPS_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider [7:0] */
-#define XUARTPS_FLOWDEL_OFFSET 0x38 /* Flow Delay [15:0] */
-#define XUARTPS_IRRX_PWIDTH_OFFSET 0x3C /* IR Minimum Received Pulse
- Width [15:0] */
-#define XUARTPS_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse
- Width [7:0] */
-#define XUARTPS_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level [5:0] */
-
-/** Control Register
- *
- * The Control register (CR) controls the major functions of the device.
- *
- * Control Register Bit Definitions
- */
+/* Register offsets for the UART. */
+#define XUARTPS_CR_OFFSET 0x00 /* Control Register */
+#define XUARTPS_MR_OFFSET 0x04 /* Mode Register */
+#define XUARTPS_IER_OFFSET 0x08 /* Interrupt Enable */
+#define XUARTPS_IDR_OFFSET 0x0C /* Interrupt Disable */
+#define XUARTPS_IMR_OFFSET 0x10 /* Interrupt Mask */
+#define XUARTPS_ISR_OFFSET 0x14 /* Interrupt Status */
+#define XUARTPS_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator */
+#define XUARTPS_RXTOUT_OFFSET 0x1C /* RX Timeout */
+#define XUARTPS_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level */
+#define XUARTPS_MODEMCR_OFFSET 0x24 /* Modem Control */
+#define XUARTPS_MODEMSR_OFFSET 0x28 /* Modem Status */
+#define XUARTPS_SR_OFFSET 0x2C /* Channel Status */
+#define XUARTPS_FIFO_OFFSET 0x30 /* FIFO */
+#define XUARTPS_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider */
+#define XUARTPS_FLOWDEL_OFFSET 0x38 /* Flow Delay */
+#define XUARTPS_IRRX_PWIDTH_OFFSET 0x3C /* IR Minimum Received Pulse Width */
+#define XUARTPS_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse Width */
+#define XUARTPS_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level */
+
+/* Control Register Bit Definitions */
#define XUARTPS_CR_STOPBRK 0x00000100 /* Stop TX break */
#define XUARTPS_CR_STARTBRK 0x00000080 /* Set TX break */
#define XUARTPS_CR_TX_DIS 0x00000020 /* TX disabled. */
@@ -92,14 +79,11 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
#define XUARTPS_CR_RXRST 0x00000001 /* RX logic reset */
#define XUARTPS_CR_RST_TO 0x00000040 /* Restart Timeout Counter */
-/** Mode Register
- *
+/*
+ * Mode Register:
* The mode register (MR) defines the mode of transfer as well as the data
* format. If this register is modified during transmission or reception,
* data validity cannot be guaranteed.
- *
- * Mode Register Bit Definitions
- *
*/
#define XUARTPS_MR_CLKSEL 0x00000001 /* Pre-scalar selection */
#define XUARTPS_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */
@@ -118,8 +102,8 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
#define XUARTPS_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */
#define XUARTPS_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */
-/** Interrupt Registers
- *
+/*
+ * Interrupt Registers:
* Interrupt control logic uses the interrupt enable register (IER) and the
* interrupt disable register (IDR) to set the value of the bits in the
* interrupt mask register (IMR). The IMR determines whether to pass an
@@ -127,7 +111,6 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
* Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
* interrupt. IMR and ISR are read only, and IER and IDR are write only.
* Reading either IER or IDR returns 0x00.
- *
* All four registers have the same bit definitions.
*/
#define XUARTPS_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */
@@ -145,8 +128,8 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
/* Goes in read_status_mask for break detection as the HW doesn't do it*/
#define XUARTPS_IXR_BRK 0x80000000
-/** Channel Status Register
- *
+/*
+ * Channel Status Register:
* The channel status register (CSR) is provided to enable the control logic
* to monitor the status of bits in the channel interrupt status register,
* even if these are masked out by the interrupt mask register.
@@ -205,7 +188,6 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
* error with all-zeros data as a break sequence. Most of the time,
* there's another non-zero byte at the end of the sequence.
*/
-
if (isrstatus & XUARTPS_IXR_FRAMING) {
while (!(xuartps_readl(XUARTPS_SR_OFFSET) &
XUARTPS_SR_RXEMPTY)) {
@@ -264,8 +246,9 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
} else if (isrstatus & XUARTPS_IXR_FRAMING) {
port->icount.frame++;
status = TTY_FRAME;
- } else if (isrstatus & XUARTPS_IXR_OVERRUN)
+ } else if (isrstatus & XUARTPS_IXR_OVERRUN) {
port->icount.overrun++;
+ }
uart_insert_char(port, isrstatus, XUARTPS_IXR_OVERRUN,
data, status);
@@ -300,7 +283,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
* the buffer if it reaches limit.
*/
port->state->xmit.tail =
- (port->state->xmit.tail + 1) & \
+ (port->state->xmit.tail + 1) &
(UART_XMIT_SIZE - 1);
}
@@ -419,7 +402,7 @@ static unsigned int xuartps_set_baud_rate(struct uart_port *port,
* @nb: Notifier block
* @event: Notify event
* @data: Notifier data
- * Return: NOTIFY_OK on success, NOTIFY_BAD on error.
+ * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
*/
static int xuartps_clk_notifier_cb(struct notifier_block *nb,
unsigned long event, void *data)
@@ -438,8 +421,7 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
switch (event) {
case PRE_RATE_CHANGE:
{
- u32 bdiv;
- u32 cd;
+ u32 bdiv, cd;
int div8;
/*
@@ -509,8 +491,6 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
}
#endif
-/*----------------------Uart Operations---------------------------*/
-
/**
* xuartps_start_tx - Start transmitting bytes
* @port: Handle to the uart port structure
@@ -529,9 +509,8 @@ static void xuartps_start_tx(struct uart_port *port)
xuartps_writel((status & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
XUARTPS_CR_OFFSET);
- while (numbytes-- && ((xuartps_readl(XUARTPS_SR_OFFSET)
- & XUARTPS_SR_TXFULL)) != XUARTPS_SR_TXFULL) {
-
+ while (numbytes-- && ((xuartps_readl(XUARTPS_SR_OFFSET) &
+ XUARTPS_SR_TXFULL)) != XUARTPS_SR_TXFULL) {
/* Break if no more data available in the UART buffer */
if (uart_circ_empty(&port->state->xmit))
break;
@@ -666,9 +645,7 @@ static void xuartps_set_termios(struct uart_port *port,
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
- /*
- * Update the per-port timeout.
- */
+ /* Update the per-port timeout. */
uart_update_timeout(port, termios->c_cflag, baud);
/* Set TX/RX Reset */
@@ -678,7 +655,8 @@ static void xuartps_set_termios(struct uart_port *port,
ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
- /* Clear the RX disable and TX disable bits and then set the TX enable
+ /*
+ * Clear the RX disable and TX disable bits and then set the TX enable
* bit and RX enable bit to enable the transmitter and receiver.
*/
xuartps_writel(
@@ -756,7 +734,7 @@ static void xuartps_set_termios(struct uart_port *port,
* xuartps_startup - Called when an application opens a xuartps port
* @port: Handle to the uart port structure
*
- * Return: 0 on success, negative error otherwise
+ * Return: 0 on success, negative errno otherwise
*/
static int xuartps_startup(struct uart_port *port)
{
@@ -850,7 +828,7 @@ static const char *xuartps_type(struct uart_port *port)
* @port: Handle to the uart port structure
* @ser: Handle to the structure whose members are compared
*
- * Return: 0 if success otherwise -EINVAL
+ * Return: 0 on success, negative errno otherwise.
*/
static int xuartps_verify_port(struct uart_port *port,
struct serial_struct *ser)
@@ -874,7 +852,7 @@ static int xuartps_verify_port(struct uart_port *port,
* uart_add_one_port()
* @port: Handle to the uart port structure
*
- * Return: 0, -ENOMEM if request fails
+ * Return: 0 on success, negative errno otherwise.
*/
static int xuartps_request_port(struct uart_port *port)
{
@@ -893,10 +871,11 @@ static int xuartps_request_port(struct uart_port *port)
}
/**
- * xuartps_release_port - Release the memory region attached to a xuartps
- * port, called when the driver removes a xuartps
- * port via uart_remove_one_port().
+ * xuartps_release_port - Release UART port
* @port: Handle to the uart port structure
+ *
+ * Release the memory region attached to a xuartps port. Called when the
+ * driver removes a xuartps port via uart_remove_one_port().
*/
static void xuartps_release_port(struct uart_port *port)
{
@@ -906,8 +885,7 @@ static void xuartps_release_port(struct uart_port *port)
}
/**
- * xuartps_config_port - Configure xuartps, called when the driver adds a
- * xuartps port
+ * xuartps_config_port - Configure UART port
* @port: Handle to the uart port structure
* @flags: If any
*/
@@ -919,7 +897,6 @@ static void xuartps_config_port(struct uart_port *port, int flags)
/**
* xuartps_get_mctrl - Get the modem control state
- *
* @port: Handle to the uart port structure
*
* Return: the modem control state
@@ -987,38 +964,23 @@ static void xuartps_poll_put_char(struct uart_port *port, unsigned char c)
}
#endif
-/** The UART operations structure
- */
static struct uart_ops xuartps_ops = {
.set_mctrl = xuartps_set_mctrl,
.get_mctrl = xuartps_get_mctrl,
.enable_ms = xuartps_enable_ms,
-
- .start_tx = xuartps_start_tx, /* Start transmitting */
- .stop_tx = xuartps_stop_tx, /* Stop transmission */
- .stop_rx = xuartps_stop_rx, /* Stop reception */
- .tx_empty = xuartps_tx_empty, /* Transmitter busy? */
- .break_ctl = xuartps_break_ctl, /* Start/stop
- * transmitting break
- */
- .set_termios = xuartps_set_termios, /* Set termios */
- .startup = xuartps_startup, /* App opens xuartps */
- .shutdown = xuartps_shutdown, /* App closes xuartps */
- .type = xuartps_type, /* Set UART type */
- .verify_port = xuartps_verify_port, /* Verification of port
- * params
- */
- .request_port = xuartps_request_port, /* Claim resources
- * associated with a
- * xuartps port
- */
- .release_port = xuartps_release_port, /* Release resources
- * associated with a
- * xuartps port
- */
- .config_port = xuartps_config_port, /* Configure when driver
- * adds a xuartps port
- */
+ .start_tx = xuartps_start_tx,
+ .stop_tx = xuartps_stop_tx,
+ .stop_rx = xuartps_stop_rx,
+ .tx_empty = xuartps_tx_empty,
+ .break_ctl = xuartps_break_ctl,
+ .set_termios = xuartps_set_termios,
+ .startup = xuartps_startup,
+ .shutdown = xuartps_shutdown,
+ .type = xuartps_type,
+ .verify_port = xuartps_verify_port,
+ .request_port = xuartps_request_port,
+ .release_port = xuartps_release_port,
+ .config_port = xuartps_config_port,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = xuartps_poll_get_char,
.poll_put_char = xuartps_poll_put_char,
@@ -1028,9 +990,7 @@ static struct uart_ops xuartps_ops = {
static struct uart_port xuartps_port[2];
/**
- * xuartps_get_port - Configure the port from the platform device resource
- * info
- *
+ * xuartps_get_port - Configure the port from the platform device resource info
* @id: Port id
*
* Return: a pointer to a uart_port or NULL for failure
@@ -1067,8 +1027,6 @@ static struct uart_port *xuartps_get_port(int id)
return port;
}
-/*-----------------------Console driver operations--------------------------*/
-
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
* xuartps_console_wait_tx - Wait for the TX to be full
@@ -1144,7 +1102,7 @@ static void xuartps_console_write(struct console *co, const char *s,
* @co: Console handle
* @options: Initial settings of uart
*
- * Return: 0, -ENODEV if no device
+ * Return: 0 on success, negative errno otherwise.
*/
static int __init xuartps_console_setup(struct console *co, char *options)
{
@@ -1183,7 +1141,7 @@ static struct console xuartps_console = {
/**
* xuartps_console_init - Initialization call
*
- * Return: 0 on success, negative error otherwise
+ * Return: 0 on success, negative errno otherwise
*/
static int __init xuartps_console_init(void)
{
@@ -1195,17 +1153,15 @@ console_initcall(xuartps_console_init);
#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
-/** Structure Definitions
- */
static struct uart_driver xuartps_uart_driver = {
- .owner = THIS_MODULE, /* Owner */
- .driver_name = XUARTPS_NAME, /* Driver name */
- .dev_name = XUARTPS_TTY_NAME, /* Node name */
- .major = XUARTPS_MAJOR, /* Major number */
- .minor = XUARTPS_MINOR, /* Minor number */
- .nr = XUARTPS_NR_PORTS, /* Number of UART ports */
+ .owner = THIS_MODULE,
+ .driver_name = XUARTPS_NAME,
+ .dev_name = XUARTPS_TTY_NAME,
+ .major = XUARTPS_MAJOR,
+ .minor = XUARTPS_MINOR,
+ .nr = XUARTPS_NR_PORTS,
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- .cons = &xuartps_console, /* Console */
+ .cons = &xuartps_console,
#endif
};
@@ -1322,14 +1278,11 @@ static int xuartps_resume(struct device *device)
static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume);
-/* ---------------------------------------------------------------------
- * Platform bus binding
- */
/**
* xuartps_probe - Platform driver probe
* @pdev: Pointer to the platform device structure
*
- * Return: 0 on success, negative error otherwise
+ * Return: 0 on success, negative errno otherwise
*/
static int xuartps_probe(struct platform_device *pdev)
{
@@ -1434,7 +1387,7 @@ err_out_clk_dis_aper:
* xuartps_remove - called when the platform driver is unregistered
* @pdev: Pointer to the platform device structure
*
- * Return: 0 on success, negative error otherwise
+ * Return: 0 on success, negative errno otherwise
*/
static int xuartps_remove(struct platform_device *pdev)
{
@@ -1462,24 +1415,16 @@ static struct of_device_id xuartps_of_match[] = {
MODULE_DEVICE_TABLE(of, xuartps_of_match);
static struct platform_driver xuartps_platform_driver = {
- .probe = xuartps_probe, /* Probe method */
- .remove = xuartps_remove, /* Detach method */
+ .probe = xuartps_probe,
+ .remove = xuartps_remove,
.driver = {
.owner = THIS_MODULE,
- .name = XUARTPS_NAME, /* Driver name */
+ .name = XUARTPS_NAME,
.of_match_table = xuartps_of_match,
.pm = &xuartps_dev_pm_ops,
},
};
-/* ---------------------------------------------------------------------
- * Module Init and Exit
- */
-/**
- * xuartps_init - Initial driver registration call
- *
- * Return: whether the registration was successful or not
- */
static int __init xuartps_init(void)
{
int retval = 0;
@@ -1497,15 +1442,8 @@ static int __init xuartps_init(void)
return retval;
}
-/**
- * xuartps_exit - Driver unregistration call
- */
static void __exit xuartps_exit(void)
{
- /* The order of unregistration is important. Unregister the
- * UART driver before the platform driver crashes the system.
- */
-
/* Unregister the platform driver */
platform_driver_unregister(&xuartps_platform_driver);
--
1.9.0.1.g4196000
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists