| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140317114018.GE9558@ns203013.ovh.net>
Date: Mon, 17 Mar 2014 12:40:18 +0100
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
To: Jean-Jacques Hiblot <jjhiblot@...phandler.com>
Cc: nicolas.ferre@...el.com, b.brezillon@...rkiz.com,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
gregory.clement@...e-electrons.com, devicetree@...r.kernel.org,
thomas.petazzoni@...e-electrons.com,
alexandre.belloni@...e-electrons.com
Subject: Re: [PATCH v5 4/9] at91: dt: Add at91sam9261 dt SoC support
On 11:05 Mon 03 Mar , Jean-Jacques Hiblot wrote:
> This patch adds support for the Device Tree on a sam9261-based platform
>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@...phandler.com>
> ---
> arch/arm/boot/dts/at91sam9261.dtsi | 740 +++++++++++++++++++++++++++++++++++++
> arch/arm/mach-at91/at91sam9261.c | 17 +
> 2 files changed, 757 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91sam9261.dtsi
>
> diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
> new file mode 100644
> index 0000000..b40b91e
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9261.dtsi
> @@ -0,0 +1,740 @@
> +/*
> + * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
> + *
> + * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@...phandler.com>
> + *
> + * Licensed under GPLv2 only.
> + */
> +
> +#include "skeleton.dtsi"
> +#include <dt-bindings/pinctrl/at91.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/clk/at91.h>
> +
> +/ {
> + model = "Atmel AT91SAM9261 family SoC";
> + compatible = "atmel,at91sam9261";
> + interrupt-parent = <&aic>;
> +
> + aliases {
> + serial0 = &dbgu;
> + serial1 = &usart0;
> + serial2 = &usart1;
> + serial3 = &usart2;
> + gpio0 = &pioA;
> + gpio1 = &pioB;
> + gpio2 = &pioC;
> + tcb0 = &tcb0;
> + i2c0 = &i2c0;
> + ssc0 = &ssc0;
> + ssc1 = &ssc1;
> + };
> +
> + cpus {
> + #address-cells = <0>;
> + #size-cells = <0>;
> +
> + cpu {
> + compatible = "arm,arm926ej-s";
> + device_type = "cpu";
> + };
> + };
> +
> + memory {
> + reg = <0x20000000 0x08000000>;
> + };
> +
> + ahb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + usb0: ohci@...00000 {
> + compatible = "atmel,at91rm9200-ohci", "usb-ohci";
> + reg = <0x00500000 0x100000>;
> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
for 5th time NACK
stop using interrupts une interrupts-extended
> + clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>;
> + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
> + status = "disabled";
> + };
> +
> + fb0: fb@...0600000 {
> + compatible = "atmel,at91sam9261-lcdc";
> + reg = <0x00600000 0x1000>;
> + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fb>;
> + clocks = <&lcd_clk>, <&hclk1>;
> + clock-names = "lcdc_clk", "hclk";
> + status = "disabled";
> + };
> +
> + nand0: nand@...00000 {
> + compatible = "atmel,at91rm9200-nand";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x40000000 0x10000000>;
> + atmel,nand-addr-offset = <22>;
> + atmel,nand-cmd-offset = <21>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_nand>;
> +
> + gpios = <&pioC 15 GPIO_ACTIVE_HIGH
> + &pioC 14 GPIO_ACTIVE_HIGH
> + 0
> + >;
> + status = "disabled";
> + };
> +
> + apb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + tcb0: timer@...a0000 {
> + compatible = "atmel,at91rm9200-tcb";
> + reg = <0xfffa0000 0x100>;
> + interrupts = < 17 IRQ_TYPE_LEVEL_HIGH 0
> + 18 IRQ_TYPE_LEVEL_HIGH 0
> + 19 IRQ_TYPE_LEVEL_HIGH 0
> + >;
> + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
> + clock-names = "t0_clk", "t1_clk", "t2_clk";
> + };
> +
> + usb1: gadget@...a4000 {
> + compatible = "atmel,at91rm9200-udc";
> + reg = <0xfffa4000 0x4000>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
> + clocks = <&usb>, <&udc_clk>, <&udpck>;
> + clock-names = "usb_clk", "udc_clk", "udpck";
> + status = "disabled";
> + };
> +
> + mmc0: mmc@...a8000 {
> + compatible = "atmel,hsmci";
> + reg = <0xfffa8000 0x600>;
> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&mci0_clk>;
> + clock-names = "mci_clk";
> + status = "disabled";
> + };
> +
> + i2c0: i2c@...ac000 {
> + compatible = "atmel,at91sam9261-i2c";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c_twi>;
> + reg = <0xfffac000 0x100>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&twi0_clk>;
> + status = "disabled";
> + };
> +
> + usart0: serial@...b0000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffb0000 0x200>;
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart0>;
> + clocks = <&usart0_clk>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> + usart1: serial@...b4000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffb4000 0x200>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart1>;
> + clocks = <&usart1_clk>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> + usart2: serial@...b8000{
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffb8000 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart2>;
> + clocks = <&usart2_clk>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> + ssc0: ssc@...bc000 {
> + compatible = "atmel,at91rm9200-ssc";
> + reg = <0xfffbc000 0x4000>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
> + status = "disabled";
> + };
> +
> + ssc1: ssc@...c0000 {
> + compatible = "atmel,at91rm9200-ssc";
> + reg = <0xfffc0000 0x4000>;
> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
> + status = "disabled";
> + };
> +
> + spi0: spi@...c8000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0xfffc8000 0x200>;
> + cs-gpios = <0>, <0>, <0>, <0>;
> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi0>;
> + clocks = <&spi0_clk>;
> + clock-names = "spi_clk";
> + status = "disabled";
> + };
> +
> + spi1: spi@...cc000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0xfffcc000 0x200>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1>;
> + clocks = <&spi1_clk>;
> + clock-names = "spi_clk";
> + status = "disabled";
> + };
> +
> + ramc: ramc@...fea00 {
> + compatible = "atmel,at91sam9260-sdramc";
> + reg = <0xffffea00 0x200>;
> + };
> +
> + matrix: matrix@...fee00 {
> + compatible = "atmel,at91sam9260-bus-matrix";
> + reg = <0xffffee00 0x200>;
> + };
> +
> + aic: interrupt-controller@...ff000 {
> + #interrupt-cells = <3>;
> + compatible = "atmel,at91rm9200-aic";
> + interrupt-controller;
> + reg = <0xfffff000 0x200>;
> + atmel,external-irqs = <29 30 31>;
> + };
> +
> + dbgu: serial@...ff200 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffff200 0x200>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_dbgu>;
> + clocks = <&mck>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> + pinctrl@...ff400 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
> + ranges = <0xfffff400 0xfffff400 0x600>;
> +
> + atmel,mux-mask = <
> + /* A B */
> + 0xffffffff 0xfffffff7 /* pioA */
> + 0xffffffff 0xfffffff4 /* pioB */
> + 0xffffffff 0xffffff07 /* pioC */
> + >;
> +
> + /* shared pinctrl settings */
> + dbgu {
> + pinctrl_dbgu: dbgu-0 {
> + atmel,pins =
> + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
> + };
> + };
> +
> + usart0 {
> + pinctrl_usart0: usart0-0 {
> + atmel,pins =
> + <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_usart0_rts: usart0_rts-0 {
> + atmel,pins =
> + <AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_usart0_cts: usart0_cts-0 {
> + atmel,pins =
> + <AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + usart1 {
> + pinctrl_usart1: usart1-0 {
> + atmel,pins =
> + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_usart1_rts: usart1_rts-0 {
> + atmel,pins =
> + <AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_usart1_cts: usart1_cts-0 {
> + atmel,pins =
> + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + usart2 {
> + pinctrl_usart2: usart2-0 {
> + atmel,pins =
> + <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_usart2_rts: usart2_rts-0 {
> + atmel,pins =
> + <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_usart2_cts: usart2_cts-0 {
> + atmel,pins =
> + <AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + nand {
> + pinctrl_nand: nand-0 {
> + atmel,pins =
> + <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
> + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
> + };
> + };
> +
> + mmc0 {
> + pinctrl_mmc0_clk: mmc0_clk-0 {
> + atmel,pins =
> + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
> + atmel,pins =
> + <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
> + AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
> + };
> +
> + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
> + atmel,pins =
> + <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
> + AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
> + AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
> + };
> + };
> +
> + ssc0 {
> + pinctrl_ssc0_tx: ssc0_tx-0 {
> + atmel,pins =
> + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_ssc0_rx: ssc0_rx-0 {
> + atmel,pins =
> + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + ssc1 {
> + pinctrl_ssc1_tx: ssc1_tx-0 {
> + atmel,pins =
> + <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_ssc1_rx: ssc1_rx-0 {
> + atmel,pins =
> + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + spi0 {
> + pinctrl_spi0: spi0-0 {
> + atmel,pins =
> + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + spi1 {
> + pinctrl_spi1: spi1-0 {
> + atmel,pins =
> + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + tcb0 {
> + pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
> + atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
> + atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
> + atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
> + atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
> + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
> + atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
> + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
> + atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
> + atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + i2c0 {
> + pinctrl_i2c_bitbang: i2c-0-bitbang {
> + atmel,pins =
> + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
> + AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
> + };
> + pinctrl_i2c_twi: i2c-0-twi {
> + atmel,pins =
> + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + };
> +
> + fb {
> + pinctrl_fb: fb-0 {
> + atmel,pins =
> + <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE
> + >;
> + };
> + };
> +
> + pioA: gpio@...ff400 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff400 0x200>;
> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&pioA_clk>;
> + };
> +
> + pioB: gpio@...ff600 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff600 0x200>;
> + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&pioB_clk>;
> + };
> +
> + pioC: gpio@...ff800 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff800 0x200>;
> + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&pioC_clk>;
> + };
> + };
> +
> + pmc: pmc@...ffc00 {
> + compatible = "atmel,at91rm9200-pmc";
> + reg = <0xfffffc00 0x100>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + interrupt-controller;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + clk32k: slck {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + };
> +
> + main: mainck {
> + compatible = "atmel,at91rm9200-clk-main";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_MOSCS>;
> + clocks = <&clk32k>;
> + };
> +
> + plla: pllack {
> + compatible = "atmel,at91rm9200-clk-pll";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_LOCKA>;
> + clocks = <&main>;
> + reg = <0>;
> + atmel,clk-input-range = <1000000 32000000>;
> + #atmel,pll-clk-output-range-cells = <4>;
> + atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
> + };
> +
> + pllb: pllbck {
> + compatible = "atmel,at91rm9200-clk-pll";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_LOCKB>;
> + clocks = <&main>;
> + reg = <1>;
> + atmel,clk-input-range = <1000000 32000000>;
> + #atmel,pll-clk-output-range-cells = <4>;
> + atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
> + };
> +
> + mck: masterck {
> + compatible = "atmel,at91rm9200-clk-master";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
> + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
> + atmel,clk-output-range = <0 94000000>;
> + atmel,clk-divisors = <1 2 4 3>;
> + };
> +
> + usb: usbck {
> + compatible = "atmel,at91rm9200-clk-usb";
> + #clock-cells = <0>;
> + atmel,clk-divisors = <1 2 4 3>;
> + clocks = <&pllb>;
> + };
> +
> + systemck {
> + compatible = "atmel,at91rm9200-clk-system";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + uhpck: uhpck {
> + #clock-cells = <0>;
> + reg = <6>;
> + clocks = <&usb>;
> + };
> +
> + udpck: udpck {
> + #clock-cells = <0>;
> + reg = <7>;
> + clocks = <&usb>;
> + };
> +
> + hclk0: hclk0 {
> + #clock-cells = <0>;
> + reg = <16>;
> + clocks = <&mck>;
> + };
> +
> + hclk1: hclk1 {
> + #clock-cells = <0>;
> + reg = <17>;
> + clocks = <&mck>;
> + };
> + };
> +
> + periphck {
> + compatible = "atmel,at91rm9200-clk-peripheral";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&mck>;
> +
> + pioA_clk: pioA_clk {
> + #clock-cells = <0>;
> + reg = <2>;
> + };
> +
> + pioB_clk: pioB_clk {
> + #clock-cells = <0>;
> + reg = <3>;
> + };
> +
> + pioC_clk: pioC_clk {
> + #clock-cells = <0>;
> + reg = <4>;
> + };
> +
> + usart0_clk: usart0_clk {
> + #clock-cells = <0>;
> + reg = <6>;
> + };
> +
> + usart1_clk: usart1_clk {
> + #clock-cells = <0>;
> + reg = <7>;
> + };
> +
> + usart2_clk: usart2_clk {
> + #clock-cells = <0>;
> + reg = <8>;
> + };
> +
> + mci0_clk: mci0_clk {
> + #clock-cells = <0>;
> + reg = <9>;
> + };
> +
> + udc_clk: udc_clk {
> + #clock-cells = <0>;
> + reg = <10>;
> + };
> +
> + twi0_clk: twi0_clk {
> + reg = <11>;
> + #clock-cells = <0>;
> + };
> +
> + spi0_clk: spi0_clk {
> + #clock-cells = <0>;
> + reg = <12>;
> + };
> +
> + spi1_clk: spi1_clk {
> + #clock-cells = <0>;
> + reg = <13>;
> + };
> +
> + tc0_clk: tc0_clk {
> + #clock-cells = <0>;
> + reg = <17>;
> + };
> +
> + tc1_clk: tc1_clk {
> + #clock-cells = <0>;
> + reg = <18>;
> + };
> +
> + tc2_clk: tc2_clk {
> + #clock-cells = <0>;
> + reg = <19>;
> + };
> +
> + ohci_clk: ohci_clk {
> + #clock-cells = <0>;
> + reg = <20>;
> + };
> +
> + lcd_clk: lcd_clk {
> + #clock-cells = <0>;
> + reg = <21>;
> + };
> + };
> + };
> +
> + rstc@...ffd00 {
> + compatible = "atmel,at91sam9260-rstc";
> + reg = <0xfffffd00 0x10>;
> + };
> +
> + shdwc@...ffd10 {
> + compatible = "atmel,at91sam9260-shdwc";
> + reg = <0xfffffd10 0x10>;
> + };
> +
> + pit: timer@...ffd30 {
> + compatible = "atmel,at91sam9260-pit";
> + reg = <0xfffffd30 0xf>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&mck>;
> + };
> +
> + watchdog@...ffd40 {
> + compatible = "atmel,at91sam9260-wdt";
> + reg = <0xfffffd40 0x10>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + i2c@0 {
> + compatible = "i2c-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c_bitbang>;
> + gpios = <&pioA 7 GPIO_ACTIVE_HIGH /* sda */
> + &pioA 8 GPIO_ACTIVE_HIGH /* scl */
> + >;
> + i2c-gpio,sda-open-drain;
> + i2c-gpio,scl-open-drain;
> + i2c-gpio,delay-us = <2>; /* ~100 kHz */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +};
> diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
> index 6276b4c..5c90581 100644
> --- a/arch/arm/mach-at91/at91sam9261.c
> +++ b/arch/arm/mach-at91/at91sam9261.c
> @@ -189,6 +189,23 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_ID("pioA", &pioA_clk),
> CLKDEV_CON_ID("pioB", &pioB_clk),
> CLKDEV_CON_ID("pioC", &pioC_clk),
> + /* more lookup table for DT entries */
> + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
> + CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
> + CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
> + CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
> + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
> + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
> + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
> + CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0),
> + CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1),
> + CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
> + CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
> + CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
> + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
> + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
> + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
> + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
do we really need this?
> };
>
> static struct clk_lookup usart_clocks_lookups[] = {
> --
> 1.9.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists