| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <532D2AAB.1020902@gmail.com> Date: Sat, 22 Mar 2014 07:16:11 +0100 From: Branimir Maksimovic <branimir.maksimovic@...il.com> To: Robert Hancock <hancockrwd@...il.com>, linux-kernel@...r.kernel.org Subject: Re: 15995MB available under Linux but 16329MB available under Win 7 On 03/22/2014 07:03 AM, Robert Hancock wrote: > On 21/03/14 10:35 PM, Branimir Maksimovic wrote: >> This really puzzles me. >> >> bmaxa@...a:~$ lspci -v -s 01:00.0 >> 01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX >> 560 Ti] (rev a1) (prog-if 00 [VGA controller]) >> Subsystem: CardExpert Technology Device 0801 >> Flags: bus master, fast devsel, latency 0, IRQ 52 >> Memory at f4000000 (32-bit, non-prefetchable) [size=32M] >> Memory at e8000000 (64-bit, prefetchable) [size=128M] >> Memory at f0000000 (64-bit, prefetchable) [size=64M] >> I/O ports at e000 [size=128] >> [virtual] Expansion ROM at f6000000 [disabled] [size=512K] >> Capabilities: <access denied> >> Kernel driver in use: nvidia >> >> bmaxa@...a:~$ dmesg | grep Mem >> [ 0.000000] Memory: 16358808K/16721316K available (7232K kernel code, >> 1106K rwdata, 3456K rodata, 1324K init, 1432K bss, 362508K reserved) > > Can you post your full dmesg output? > [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.0-rc7-core2-custom (bmaxa@...a) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-1ubuntu1) ) #126 SMP Fri Mar 21 02:19:04 CET 2014 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14.0-rc7-core2-custom root=UUID=2e3c458f-cb2e-4789-8e70-68bccb5bafd9 ro zswap.enabled=1 transparent_hugepage=always resume=UUID=ee90e063-6256-44f2-8bb9-a20d75e9a078 resume_offset=808960 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd588fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd589000-0x00000000dd8e1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd8e2000-0x00000000dd8f1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dd8f2000-0x00000000dda14fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dda15000-0x00000000de7c6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de7c7000-0x00000000de7c7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de7c8000-0x00000000de80afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de80b000-0x00000000dec41fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dec42000-0x00000000deff3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: System manufacturer System Product Name/MAXIMUS V GENE, BIOS 1903 08/19/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FF0000000 write-back [ 0.000000] 2 base 410000000 mask FF8000000 write-back [ 0.000000] 3 base 418000000 mask FFC000000 write-back [ 0.000000] 4 base 41C000000 mask FFE000000 write-back [ 0.000000] 5 base 41E000000 mask FFF000000 write-back [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 16GB, type WB [ 0.000000] reg 1, base: 16GB, range: 256MB, type WB [ 0.000000] reg 2, base: 16640MB, range: 128MB, type WB [ 0.000000] reg 3, base: 16768MB, range: 64MB, type WB [ 0.000000] reg 4, base: 16832MB, range: 32MB, type WB [ 0.000000] reg 5, base: 16864MB, range: 16MB, type WB [ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC [ 0.000000] total RAM covered: 16368M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 8GB, type WB [ 0.000000] reg 5, base: 16GB, range: 512MB, type WB [ 0.000000] reg 6, base: 16880MB, range: 16MB, type UC [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7d0-0x000fd7df] mapped at [ffff8800000fd7d0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd0000, 0x01fd0fff] PGTABLE [ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41ee00000-0x41effffff] [ 0.000000] [mem 0x41ee00000-0x41effffff] page 2M [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41edfffff] [ 0.000000] [mem 0x41c000000-0x41edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdd588fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdd3fffff] page 2M [ 0.000000] [mem 0xdd400000-0xdd588fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xde7c7000-0xde7c7fff] [ 0.000000] [mem 0xde7c7000-0xde7c7fff] page 4k [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xde80b000-0xdec41fff] [ 0.000000] [mem 0xde80b000-0xde9fffff] page 4k [ 0.000000] [mem 0xdea00000-0xdebfffff] page 2M [ 0.000000] [mem 0xdec00000-0xdec41fff] page 4k [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdeff4000-0xdeffffff] [ 0.000000] [mem 0xdeff4000-0xdeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x35e58000-0x36f23fff] [ 0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000dd8e5078 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000dd8f0040 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000dd8e5170 00AECE (v02 ALASKA A M I 00000022 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dda13080 000040 [ 0.000000] ACPI: APIC 00000000dd8f0150 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000dd8f01c8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000dd8f0210 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dd8f0250 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000dd8f0288 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 00000000dd8f1000 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000dd8f0650 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41effffff] [ 0.000000] NODE_DATA [mem 0x41efe9000-0x41efedfff] [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdd588fff] [ 0.000000] node 0: [mem 0xde7c7000-0xde7c7fff] [ 0.000000] node 0: [mem 0xde80b000-0xdec41fff] [ 0.000000] node 0: [mem 0xdeff4000-0xdeffffff] [ 0.000000] node 0: [mem 0x100000000-0x41effffff] [ 0.000000] On node 0 totalpages: 4180329 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14120 pages used for memmap [ 0.000000] DMA32 zone: 903629 pages, LIFO batch:31 [ 0.000000] Normal zone: 51136 pages used for memmap [ 0.000000] Normal zone: 3272704 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd589000-0xdd8e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd8e2000-0xdd8f1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd8f2000-0xdda14fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdda15000-0xde7c6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xde7c8000-0xde80afff] [ 0.000000] PM: Registered nosave memory: [mem 0xdec42000-0xdeff3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041ec00000 s86528 r8192 d24064 u524288 [ 0.000000] pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4114988 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.0-rc7-core2-custom root=UUID=2e3c458f-cb2e-4789-8e70-68bccb5bafd9 ro zswap.enabled=1 transparent_hugepage=always resume=UUID=ee90e063-6256-44f2-8bb9-a20d75e9a078 resume_offset=808960 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16358808K/16721316K available (7232K kernel code, 1106K rwdata, 3456K rodata, 1324K init, 1432K bss, 362508K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3400.117 MHz processor [ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.23 BogoMIPS (lpj=13600468) [ 0.000160] pid_max: default: 32768 minimum: 301 [ 0.000228] ACPI: Core revision 20131218 [ 0.003936] ACPI: All ACPI Tables successfully acquired [ 0.072141] Security Framework initialized [ 0.072213] AppArmor: AppArmor initialized [ 0.072276] Yama: becoming mindful. [ 0.073096] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.076053] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.077409] Mount-cache hash table entries: 256 [ 0.077580] Initializing cgroup subsys memory [ 0.077647] Initializing cgroup subsys devices [ 0.077712] Initializing cgroup subsys freezer [ 0.077777] Initializing cgroup subsys net_cls [ 0.077841] Initializing cgroup subsys blkio [ 0.077906] Initializing cgroup subsys perf_event [ 0.077972] Initializing cgroup subsys hugetlb [ 0.078052] CPU: Physical Processor ID: 0 [ 0.078116] CPU: Processor Core ID: 0 [ 0.078181] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.078181] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.078553] mce: CPU supports 9 MCE banks [ 0.078625] CPU0: Thermal monitoring enabled (TM1) [ 0.078696] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.078696] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.078696] tlb_flushall_shift: 2 [ 0.078918] Freeing SMP alternatives memory: 28K (ffffffff81e61000 - ffffffff81e68000) [ 0.079808] ftrace: allocating 28103 entries in 110 pages [ 0.089293] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.129023] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09) [ 0.129215] TSC deadline timer enabled [ 0.130778] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.131032] ... version: 3 [ 0.131095] ... bit width: 48 [ 0.131159] ... generic registers: 8 [ 0.131222] ... value mask: 0000ffffffffffff [ 0.131290] ... max period: 0000ffffffffffff [ 0.131357] ... fixed-purpose events: 3 [ 0.131420] ... event mask: 00000007000000ff [ 0.132559] x86: Booting SMP configuration: [ 0.132624] .... node #0, CPUs: #1 [ 0.145989] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.153386] #2 #3 [ 0.180378] x86: Booted up 1 node, 4 CPUs [ 0.180493] smpboot: Total of 4 processors activated (27200.93 BogoMIPS) [ 0.182960] devtmpfs: initialized [ 0.185541] EVM: security.selinux [ 0.185601] EVM: security.SMACK64 [ 0.185661] EVM: security.ima [ 0.185720] EVM: security.capability [ 0.185812] PM: Registering ACPI NVS region [mem 0xdd8f2000-0xdda14fff] (1191936 bytes) [ 0.185918] PM: Registering ACPI NVS region [mem 0xde7c8000-0xde80afff] (274432 bytes) [ 0.186541] pinctrl core: initialized pinctrl subsystem [ 0.186649] regulator-dummy: no parameters [ 0.186737] RTC time: 6:09:46, date: 03/22/14 [ 0.186823] NET: Registered protocol family 16 [ 0.186968] cpuidle: using governor ladder [ 0.187031] cpuidle: using governor menu [ 0.187120] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.187215] ACPI: bus type PCI registered [ 0.187316] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.187417] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.191760] PCI: Using configuration type 1 for base access [ 0.192653] bio: create slab <bio-0> at 0 [ 0.192809] ACPI: Added _OSI(Module Device) [ 0.192872] ACPI: Added _OSI(Processor Device) [ 0.192935] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.193001] ACPI: Added _OSI(Processor Aggregator Device) [ 0.195269] ACPI: Executed 1 blocks of module-level executable AML code [ 0.200628] ACPI: SSDT 00000000dd88f018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.201070] ACPI: Dynamic OEM Table Load: [ 0.201191] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.204493] ACPI: SSDT 00000000dd890a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.204950] ACPI: Dynamic OEM Table Load: [ 0.205071] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.208407] ACPI: SSDT 00000000dd891c18 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.208842] ACPI: Dynamic OEM Table Load: [ 0.208964] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.212705] ACPI: Interpreter enabled [ 0.212770] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.212930] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.213095] ACPI: (supports S0 S3 S4 S5) [ 0.213157] ACPI: Using IOAPIC for interrupt routing [ 0.213238] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.213453] ACPI: No dock devices found. [ 0.218056] ACPI: Power Resource [FN00] (off) [ 0.218175] ACPI: Power Resource [FN01] (off) [ 0.218291] ACPI: Power Resource [FN02] (off) [ 0.218407] ACPI: Power Resource [FN03] (off) [ 0.218523] ACPI: Power Resource [FN04] (off) [ 0.218854] ACPI: \_PR_.CPU4: failed to get CPU APIC ID. [ 0.218856] ACPI: \_PR_.CPU5: failed to get CPU APIC ID. [ 0.218858] ACPI: \_PR_.CPU6: failed to get CPU APIC ID. [ 0.218860] ACPI: \_PR_.CPU7: failed to get CPU APIC ID. [ 0.219006] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.219078] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.219314] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.219491] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.219879] PCI host bridge to bus 0000:00 [ 0.219942] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.220009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.220078] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.220147] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.220218] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.220289] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.220360] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.220431] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.220502] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.220573] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.220643] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] [ 0.220719] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.220782] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.220807] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.220836] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.220951] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.220971] pci 0000:00:14.0: reg 0x10: [mem 0xf6320000-0xf632ffff 64bit] [ 0.221035] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.221067] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.221162] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.221183] pci 0000:00:16.0: reg 0x10: [mem 0xf633b000-0xf633b00f 64bit] [ 0.221253] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.221316] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.221332] pci 0000:00:19.0: reg 0x10: [mem 0xf6300000-0xf631ffff] [ 0.221339] pci 0000:00:19.0: reg 0x14: [mem 0xf6339000-0xf6339fff] [ 0.221347] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f] [ 0.221404] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.221436] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.221532] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.221551] pci 0000:00:1a.0: reg 0x10: [mem 0xf6338000-0xf63383ff] [ 0.221633] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.221676] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.221771] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.221784] pci 0000:00:1b.0: reg 0x10: [mem 0xf6330000-0xf6333fff 64bit] [ 0.221851] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.221885] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.221983] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.222112] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.222158] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.222252] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.222326] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.222362] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.222456] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.222530] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.222567] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 0.222663] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.222681] pci 0000:00:1d.0: reg 0x10: [mem 0xf6337000-0xf63373ff] [ 0.222764] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.222806] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.222903] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.223053] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.223068] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097] [ 0.223075] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083] [ 0.223081] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077] [ 0.223087] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063] [ 0.223094] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.223100] pci 0000:00:1f.2: reg 0x24: [mem 0xf6336000-0xf63367ff] [ 0.223139] pci 0000:00:1f.2: PME# supported from D3hot [ 0.223192] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.223205] pci 0000:00:1f.3: reg 0x10: [mem 0xf6335000-0xf63350ff 64bit] [ 0.223223] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.223313] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000 [ 0.223320] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff] [ 0.223327] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.223335] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.223340] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.223345] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref] [ 0.223406] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300 [ 0.223413] pci 0000:01:00.1: reg 0x10: [mem 0xf6080000-0xf6083fff] [ 0.230883] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.230949] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.230951] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff] [ 0.230953] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref] [ 0.231029] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.231179] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.231206] pci 0000:03:00.0: reg 0x10: [mem 0xf6200000-0xf6207fff 64bit] [ 0.231359] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.231389] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.238883] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.238952] pci 0000:00:1c.4: bridge window [mem 0xf6200000-0xf62fffff] [ 0.239022] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601 [ 0.239040] pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.239052] pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.239065] pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.239077] pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.239090] pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.239102] pci 0000:04:00.0: reg 0x24: [mem 0xf6100000-0xf61001ff] [ 0.239202] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.246879] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.246946] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.246949] pci 0000:00:1c.7: bridge window [mem 0xf6100000-0xf61fffff] [ 0.246978] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.247187] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.247603] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.248016] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.248429] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.248842] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.249255] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.249752] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.250165] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.250617] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.250752] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.250897] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.250994] vgaarb: loaded [ 0.251053] vgaarb: bridge control possible 0000:01:00.0 [ 0.251233] SCSI subsystem initialized [ 0.251323] libata version 3.00 loaded. [ 0.251341] ACPI: bus type USB registered [ 0.251416] usbcore: registered new interface driver usbfs [ 0.251488] usbcore: registered new interface driver hub [ 0.251565] usbcore: registered new device driver usb [ 0.251696] PCI: Using ACPI for IRQ routing [ 0.253126] PCI: pci_cache_line_size set to 64 bytes [ 0.253168] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.253170] e820: reserve RAM buffer [mem 0xdd589000-0xdfffffff] [ 0.253171] e820: reserve RAM buffer [mem 0xde7c8000-0xdfffffff] [ 0.253172] e820: reserve RAM buffer [mem 0xdec42000-0xdfffffff] [ 0.253173] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.253174] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 0.253234] NetLabel: Initializing [ 0.253294] NetLabel: domain hash size = 128 [ 0.253357] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.253428] NetLabel: unlabeled traffic allowed by default [ 0.253538] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.253866] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.255951] Switched to clocksource hpet [ 0.259735] AppArmor: AppArmor Filesystem Enabled [ 0.259815] pnp: PnP ACPI init [ 0.259883] ACPI: bus type PNP registered [ 0.260012] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.260084] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.260092] pnp 00:01: [dma 4] [ 0.260103] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.260118] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.260178] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.260207] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.260277] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.260345] system 00:04: [io 0xffff] has been reserved [ 0.260412] system 00:04: [io 0xffff] has been reserved [ 0.260478] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.260547] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.260616] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.260684] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.260752] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.260774] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.260805] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.260874] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.260928] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.260997] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.261031] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.261099] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.261118] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.261290] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.261360] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.261432] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.261503] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.261576] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.261646] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.261716] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.261786] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.261857] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved [ 0.261927] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.261998] system 00:0a: [mem 0xe0000000-0xe0000fff] has been reserved [ 0.262069] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.262145] pnp: PnP ACPI: found 11 devices [ 0.262207] ACPI: bus type PNP unregistered [ 0.268057] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.268060] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.268061] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.268076] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.268077] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.268078] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.268082] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0100000-0xe02fffff] [ 0.268157] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0300000-0xe04fffff 64bit pref] [ 0.268254] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.268323] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.268389] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.268459] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff] [ 0.268530] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref] [ 0.268627] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.268693] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.268767] pci 0000:00:1c.0: bridge window [mem 0xe0100000-0xe02fffff] [ 0.268840] pci 0000:00:1c.0: bridge window [mem 0xe0300000-0xe04fffff 64bit pref] [ 0.268943] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.269011] pci 0000:00:1c.4: bridge window [mem 0xf6200000-0xf62fffff] [ 0.269087] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.269153] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.269224] pci 0000:00:1c.7: bridge window [mem 0xf6100000-0xf61fffff] [ 0.269301] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.269302] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.269303] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.269304] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.269306] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.269307] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.269308] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.269309] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.269310] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.269311] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.269312] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.269313] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf60fffff] [ 0.269315] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref] [ 0.269316] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.269317] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe02fffff] [ 0.269318] pci_bus 0000:02: resource 2 [mem 0xe0300000-0xe04fffff 64bit pref] [ 0.269319] pci_bus 0000:03: resource 1 [mem 0xf6200000-0xf62fffff] [ 0.269321] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.269322] pci_bus 0000:04: resource 1 [mem 0xf6100000-0xf61fffff] [ 0.269337] NET: Registered protocol family 2 [ 0.269512] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.269767] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.269932] TCP: Hash tables configured (established 131072 bind 65536) [ 0.270010] TCP: reno registered [ 0.270082] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.276541] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.276661] NET: Registered protocol family 1 [ 0.315987] pci 0000:01:00.0: Boot video device [ 0.316109] PCI: CLS 64 bytes, default 64 [ 0.316141] Trying to unpack rootfs image as initramfs... [ 0.510049] Freeing initrd memory: 17200K (ffff880035e58000 - ffff880036f24000) [ 0.510148] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.510218] software IO TLB [mem 0xd9589000-0xdd589000] (64MB) mapped at [ffff8800d9589000-ffff8800dd588fff] [ 0.510463] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.510593] Scanning for low memory corruption every 60 seconds [ 0.510856] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.510933] Initialise system trusted keyring [ 0.511022] audit: initializing netlink subsys (disabled) [ 0.511097] audit: type=2000 audit(1395468585.440:1): initialized [ 0.529253] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.530203] zbud: loaded [ 0.530351] VFS: Disk quotas dquot_6.5.2 [ 0.530440] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.530814] fuse init (API version 7.22) [ 0.530928] msgmni has been set to 31984 [ 0.531022] Key type big_key registered [ 0.531349] Key type asymmetric registered [ 0.531412] Asymmetric key parser 'x509' registered [ 0.531502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.535803] io scheduler noop registered [ 0.535866] io scheduler deadline registered (default) [ 0.535950] io scheduler cfq registered [ 0.536134] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.536447] intel_idle: MWAIT substates: 0x1120 [ 0.536449] intel_idle: v0.4 model 0x3A [ 0.536449] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.536575] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.536675] ACPI: Power Button [PWRB] [ 0.536760] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.536855] ACPI: Power Button [PWRF] [ 0.536953] ACPI: Fan [FAN0] (off) [ 0.537031] ACPI: Fan [FAN1] (off) [ 0.537108] ACPI: Fan [FAN2] (off) [ 0.537186] ACPI: Fan [FAN3] (off) [ 0.537262] ACPI: Fan [FAN4] (off) [ 0.544013] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.544081] ACPI: Thermal Zone [TZ00] (28 C) [ 0.544277] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.544344] ACPI: Thermal Zone [TZ01] (30 C) [ 0.544424] GHES: HEST is not enabled! [ 0.544537] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.545834] Linux agpgart interface v0.103 [ 0.546796] brd: module loaded [ 0.547314] loop: module loaded [ 0.547607] libphy: Fixed MDIO Bus: probed [ 0.547727] tun: Universal TUN/TAP device driver, 1.6 [ 0.547800] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com> [ 0.547897] PPP generic driver version 2.4.2 [ 0.547984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.548055] ehci-pci: EHCI PCI platform driver [ 0.548198] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.548267] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.548371] ehci-pci 0000:00:1a.0: debug port 2 [ 0.552337] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.552352] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6338000 [ 0.563782] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.563875] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.563946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.564041] usb usb1: Product: EHCI Host Controller [ 0.564105] usb usb1: Manufacturer: Linux 3.14.0-rc7-core2-custom ehci_hcd [ 0.564176] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.564316] hub 1-0:1.0: USB hub found [ 0.564382] hub 1-0:1.0: 2 ports detected [ 0.564584] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.564653] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.564756] ehci-pci 0000:00:1d.0: debug port 2 [ 0.568714] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.568727] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6337000 [ 0.579773] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.579865] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.579936] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.580030] usb usb2: Product: EHCI Host Controller [ 0.580095] usb usb2: Manufacturer: Linux 3.14.0-rc7-core2-custom ehci_hcd [ 0.580166] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.580305] hub 2-0:1.0: USB hub found [ 0.580371] hub 2-0:1.0: 2 ports detected [ 0.580504] ehci-platform: EHCI generic platform driver [ 0.580573] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.580643] ohci-pci: OHCI PCI platform driver [ 0.580711] ohci-platform: OHCI generic platform driver [ 0.580781] uhci_hcd: USB Universal Host Controller Interface driver [ 0.580928] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.580996] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.581164] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.581178] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X [ 0.581224] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.581295] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.581389] usb usb3: Product: xHCI Host Controller [ 0.581454] usb usb3: Manufacturer: Linux 3.14.0-rc7-core2-custom xhci_hcd [ 0.581524] usb usb3: SerialNumber: 0000:00:14.0 [ 0.581711] hub 3-0:1.0: USB hub found [ 0.581781] hub 3-0:1.0: 4 ports detected [ 0.582058] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.582125] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.582244] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.582315] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.582409] usb usb4: Product: xHCI Host Controller [ 0.582474] usb usb4: Manufacturer: Linux 3.14.0-rc7-core2-custom xhci_hcd [ 0.582544] usb usb4: SerialNumber: 0000:00:14.0 [ 0.582729] hub 4-0:1.0: USB hub found [ 0.582800] hub 4-0:1.0: 4 ports detected [ 0.583113] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.583182] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 0.644486] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.644490] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.644493] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.644496] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.644499] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.644590] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.644661] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.644756] usb usb5: Product: xHCI Host Controller [ 0.644821] usb usb5: Manufacturer: Linux 3.14.0-rc7-core2-custom xhci_hcd [ 0.644892] usb usb5: SerialNumber: 0000:03:00.0 [ 0.645078] hub 5-0:1.0: USB hub found [ 0.645150] hub 5-0:1.0: 2 ports detected [ 0.645269] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.645336] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6 [ 0.645486] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.645557] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.645651] usb usb6: Product: xHCI Host Controller [ 0.645716] usb usb6: Manufacturer: Linux 3.14.0-rc7-core2-custom xhci_hcd [ 0.645787] usb usb6: SerialNumber: 0000:03:00.0 [ 0.645972] hub 6-0:1.0: USB hub found [ 0.646042] hub 6-0:1.0: 2 ports detected [ 0.646183] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.648502] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.648571] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.648843] mousedev: PS/2 mouse device common for all mice [ 0.649105] rtc_cmos 00:05: RTC can wake from S4 [ 0.649296] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.649388] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.649524] device-mapper: uevent: version 1.0.3 [ 0.649651] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@...hat.com [ 0.649751] Intel P-state driver initializing. [ 0.649822] Intel pstate controlling: cpu 0 [ 0.649894] Intel pstate controlling: cpu 1 [ 0.649971] Intel pstate controlling: cpu 2 [ 0.650039] Intel pstate controlling: cpu 3 [ 0.650114] ledtrig-cpu: registered to indicate activity on CPUs [ 0.650229] TCP: cubic registered [ 0.650342] NET: Registered protocol family 10 [ 0.650484] NET: Registered protocol family 17 [ 0.650550] Key type dns_resolver registered [ 0.650881] Loading compiled-in X.509 certificates [ 0.651446] Loaded X.509 cert 'Magrathea: Glacier signing key: f89562611143a4f77a9dcf6557ce653bd7356fe2' [ 0.651550] registered taskstats version 1 [ 0.651613] zswap: loading zswap [ 0.651674] zswap: using lzo compressor [ 0.653644] Key type trusted registered [ 0.655538] Key type encrypted registered [ 0.657470] AppArmor: AppArmor sha1 policy hashing enabled [ 0.657539] IMA: No TPM chip found, activating TPM-bypass! [ 0.657832] regulator-dummy: disabling [ 0.658041] Magic number: 6:883:165 [ 0.658212] rtc_cmos 00:05: setting system clock to 2014-03-22 06:09:46 UTC (1395468586) [ 0.658379] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.658449] EDD information not available. [ 0.658551] PM: Checking hibernation image partition UUID=ee90e063-6256-44f2-8bb9-a20d75e9a078 [ 0.875672] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.979321] PM: Hibernation image not present or could not be loaded. [ 0.979933] Freeing unused kernel memory: 1324K (ffffffff81d16000 - ffffffff81e61000) [ 0.980031] Write protecting the kernel read-only data: 12288k [ 0.981774] Freeing unused kernel memory: 948K (ffff880001713000 - ffff880001800000) [ 0.982998] Freeing unused kernel memory: 640K (ffff880001b60000 - ffff880001c00000) [ 0.992321] systemd-udevd[114]: starting version 204 [ 1.007257] pps_core: LinuxPPS API ver. 1 registered [ 1.007257] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...ux.it> [ 1.008027] PTP clock support registered [ 1.010464] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.010536] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.010743] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.010857] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 1.022045] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.022120] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.022696] hub 1-1:1.0: USB hub found [ 1.022806] hub 1-1:1.0: 6 ports detected [ 1.135521] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.267686] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.267767] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.268068] hub 2-1:1.0: USB hub found [ 1.268309] hub 2-1:1.0: 8 ports detected [ 1.270213] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.270301] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:bf:48:88:f7:57 [ 1.270406] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.270505] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.270620] ahci 0000:00:1f.2: version 3.0 [ 1.270763] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X [ 1.270778] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.283405] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 1.283515] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst [ 1.299950] scsi0 : ahci [ 1.300284] scsi1 : ahci [ 1.300581] scsi2 : ahci [ 1.300829] scsi3 : ahci [ 1.301038] scsi4 : ahci [ 1.301233] scsi5 : ahci [ 1.301326] ata1: SATA max UDMA/133 abar m2048@...6336000 port 0xf6336100 irq 48 [ 1.301424] ata2: SATA max UDMA/133 abar m2048@...6336000 port 0xf6336180 irq 48 [ 1.301518] ata3: DUMMY [ 1.301575] ata4: DUMMY [ 1.301632] ata5: SATA max UDMA/133 abar m2048@...6336000 port 0xf6336300 irq 48 [ 1.301727] ata6: DUMMY [ 1.301904] ahci 0000:04:00.0: irq 49 for MSI/MSI-X [ 1.301918] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled [ 1.302101] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.302234] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 1.302539] scsi6 : ahci [ 1.302692] scsi7 : ahci [ 1.302780] ata7: SATA max UDMA/133 abar m512@...6100000 port 0xf6100100 irq 49 [ 1.302878] ata8: SATA max UDMA/133 abar m512@...6100000 port 0xf6100180 irq 49 [ 1.435347] usb 5-1: new full-speed USB device number 2 using xhci_hcd [ 1.507262] tsc: Refined TSC clocksource calibration: 3400.024 MHz [ 1.619204] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.620108] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359) [ 1.620325] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88040e039708), AE_NOT_FOUND (20131218/psparse-536) [ 1.620662] usb 5-1: New USB device found, idVendor=046d, idProduct=092c [ 1.620737] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.620809] usb 5-1: Product: Camera [ 1.620869] usb 5-1: Manufacturer: [ 1.663186] ata1.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133 [ 1.663268] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.688498] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359) [ 1.688691] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88040e039708), AE_NOT_FOUND (20131218/psparse-536) [ 1.721461] ata1.00: configured for UDMA/133 [ 1.721712] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5 [ 1.721941] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.721952] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.722157] sd 0:0:0:0: [sda] Write Protect is off [ 1.722229] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.722239] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.761169] sda: sda1 sda2 [ 1.761516] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.787143] usb 5-2: new high-speed USB device number 3 using xhci_hcd [ 1.791113] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.791837] ata7.00: ATA-9: ST2000VN000-1H3164, SC42, max UDMA/133 [ 1.791919] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.792635] ata7.00: configured for UDMA/133 [ 1.971569] usb 5-2: New USB device found, idVendor=03f0, idProduct=002a [ 1.971652] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.971723] usb 5-2: Product: HP LaserJet Professional P1102 [ 1.971790] usb 5-2: Manufacturer: Hewlett-Packard [ 1.971854] usb 5-2: SerialNumber: 000000000QN06A3BPR1a [ 2.038959] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.039708] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359) [ 2.039906] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88040e039780), AE_NOT_FOUND (20131218/psparse-536) [ 2.043125] usb 2-1.5: new low-speed USB device number 3 using ehci-pci [ 2.060998] ata2.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133 [ 2.061082] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.061885] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359) [ 2.062078] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88040e039780), AE_NOT_FOUND (20131218/psparse-536) [ 2.062566] ata2.00: configured for UDMA/133 [ 2.062805] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 2.063066] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.063080] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.063292] sd 1:0:0:0: [sdb] Write Protect is off [ 2.063357] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.063367] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.082616] sdb: sdb1 sdb2 < sdb5 > [ 2.083087] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.138945] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c077 [ 2.139029] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.139123] usb 2-1.5: Product: USB Optical Mouse [ 2.139187] usb 2-1.5: Manufacturer: Logitech [ 2.141876] hidraw: raw HID events driver (C) Jiri Kosina [ 2.145099] usbcore: registered new interface driver usbhid [ 2.145173] usbhid: USB HID core driver [ 2.146251] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C077.0001/input/input4 [ 2.146459] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0 [ 2.210863] usb 2-1.6: new low-speed USB device number 4 using ehci-pci [ 2.325554] usb 2-1.6: New USB device found, idVendor=045e, idProduct=00b4 [ 2.325639] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.325733] usb 2-1.6: Product: Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard [ 2.325801] usb 2-1.6: Manufacturer: Microsoft [ 2.334078] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:045E:00B4.0002/input/input5 [ 2.334350] hid-generic 0003:045E:00B4.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard] on usb-0000:00:1d.0-1.6/input0 [ 2.348387] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:045E:00B4.0003/input/input6 [ 2.348647] hid-generic 0003:045E:00B4.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard] on usb-0000:00:1d.0-1.6/input1 [ 2.382761] ata5: SATA link down (SStatus 0 SControl 300) [ 2.383139] scsi 6:0:0:0: Direct-Access ATA ST2000VN000-1H31 SC42 PQ: 0 ANSI: 5 [ 2.383389] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.383404] sd 6:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.383405] sd 6:0:0:0: [sdc] 4096-byte physical blocks [ 2.383634] sd 6:0:0:0: [sdc] Write Protect is off [ 2.383635] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.383744] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.407023] sdc: sdc1 sdc2 sdc3 sdc4 [ 2.407886] sd 6:0:0:0: [sdc] Attached SCSI disk [ 2.418984] usb 2-1.7: new low-speed USB device number 5 using ehci-pci [ 2.506827] Switched to clocksource tsc [ 2.608127] usb 2-1.7: New USB device found, idVendor=051d, idProduct=0002 [ 2.608200] usb 2-1.7: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.608294] usb 2-1.7: Product: Back-UPS CS 500 FW:808.q8.I USB FW:q8 [ 2.608364] usb 2-1.7: Manufacturer: American Power Conversion [ 2.608432] usb 2-1.7: SerialNumber: AB0952291626 [ 2.874523] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.877616] ata8.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100 [ 2.881404] ata8.00: configured for UDMA/100 [ 2.889992] scsi 7:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5 [ 2.906305] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.906414] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.906632] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 2.906741] sr 7:0:0:0: Attached scsi generic sg3 type 5 [ 3.133122] random: nonblocking pool is initialized [ 4.081736] raid6: sse2x1 9343 MB/s [ 4.126787] hid-generic 0003:051D:0002.0004: hiddev0,hidraw3: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q8.I USB FW:q8] on usb-0000:00:1d.0-1.7/input0 [ 4.149698] raid6: sse2x2 11678 MB/s [ 4.201837] usb 2-1.8: new full-speed USB device number 6 using ehci-pci [ 4.217659] raid6: sse2x4 13434 MB/s [ 4.217721] raid6: using algorithm sse2x4 (13434 MB/s) [ 4.217787] raid6: using ssse3x2 recovery algorithm [ 4.218689] xor: automatically using best checksumming function: [ 4.257635] avx : 25698.000 MB/sec [ 4.264869] bio: create slab <bio-1> at 1 [ 4.265062] Btrfs loaded [ 4.295174] usb 2-1.8: New USB device found, idVendor=04a9, idProduct=2220 [ 4.295258] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.295353] usb 2-1.8: Product: CanoScan [ 4.295414] usb 2-1.8: Manufacturer: Canon [ 4.361849] BTRFS: device label Linux devid 1 transid 26704 /dev/sdb1 [ 4.380633] BTRFS: device label Dodatni devid 1 transid 28882 /dev/sdb5 [ 4.610547] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 4.610550] PM: Marking nosave pages: [mem 0xdd589000-0xde7c6fff] [ 4.610594] PM: Marking nosave pages: [mem 0xde7c8000-0xde80afff] [ 4.610595] PM: Marking nosave pages: [mem 0xdec42000-0xdeff3fff] [ 4.610604] PM: Marking nosave pages: [mem 0xdf000000-0xffffffff] [ 4.610835] PM: Basic memory bitmaps created [ 4.659024] PM: Basic memory bitmaps freed [ 4.976692] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null) [ 7.954891] systemd-udevd[365]: starting version 204 [ 8.871425] lp: driver loaded but no devices found [ 9.013039] [drm] Initialized drm 1.1.0 20060810 [ 9.950770] nvidia: module license 'NVIDIA' taints kernel. [ 9.950773] Disabling lock debugging due to kernel taint [ 9.952886] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 9.955393] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 9.955506] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0 [ 9.955510] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.49 Wed Feb 12 20:42:50 PST 2014 [ 10.194881] wmi: Mapper loaded [ 10.263413] nct6775: Found NCT6779D or compatible chip at 0x2e:0x290 [ 10.288184] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258) [ 10.288188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.288191] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 10.288193] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20131218/utaddress-258) [ 10.288195] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.288196] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 10.288198] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20131218/utaddress-258) [ 10.288200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.288200] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 10.362897] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 10.634144] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17 [ 10.681102] device-mapper: multipath: version 1.6.0 loaded [ 10.687634] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17 [ 10.687644] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17 [ 10.687652] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17 [ 10.687687] microcode: Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba [ 10.837201] WARNING! power/level is deprecated; use power/control instead [ 11.231390] AVX version of gcm_enc/dec engaged. [ 11.232826] hda-intel 0000:00:1b.0: Applying patch firmware 'hda-jack-retask.fw' [ 11.233051] hda_intel: Disabling MSI [ 11.233056] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 11.233058] hda-intel 0000:01:00.1: Applying patch firmware 'hda-jack-retask.fw' [ 11.284538] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 11.284588] hda-intel 0000:01:00.1: Disabling 64bit DMA [ 11.287685] hda-intel 0000:01:00.1: Enable delay in RIRB handling [ 11.297297] SKU: Nid=0x0 sku_cfg=0x0000846b [ 11.297298] SKU: port_connectivity=0x0 [ 11.297299] SKU: enable_pcbeep=0x1 [ 11.297299] SKU: check_sum=0x00000000 [ 11.297300] SKU: customization=0x00000000 [ 11.297300] SKU: external_amp=0x5 [ 11.297301] SKU: platform_type=0x0 [ 11.297301] SKU: swap=0x1 [ 11.297302] SKU: override=0x1 [ 11.297708] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 11.297709] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.297709] hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.297710] mono: mono_out=0x0 [ 11.297710] dig-out=0x11/0x1e [ 11.297711] inputs: [ 11.297712] Front Mic=0x19 [ 11.297713] Rear Mic=0x18 [ 11.297714] Line=0x1a [ 11.297714] realtek: Enabling init ASM_ID=0x846b CODEC_ID=10ec0899 [ 11.308769] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 11.308829] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 11.308865] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 11.308899] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 11.308932] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 11.308965] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 11.309000] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 11.812368] Linux video capture interface: v2.00 [ 11.927644] gspca_main: v2.14.0 registered [ 11.999928] gspca_main: spca561-2.14.0 probing 046d:092c [ 12.002489] input: spca561 as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb5/5-1/input/input15 [ 12.002552] usbcore: registered new interface driver spca561 [ 12.065197] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 12.065248] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18 [ 12.065298] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 12.065343] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 12.237160] intel_rapl: domain uncore energy ctr 0:0 not working, skip [ 12.456130] BTRFS: device label Linux devid 1 transid 26704 /dev/sdb1 [ 12.457469] BTRFS: device label Dodatni devid 1 transid 28882 /dev/sdb5 [ 14.857831] EXT4-fs (sdc4): re-mounted. Opts: (null) [ 14.934461] BTRFS: device label Linux devid 1 transid 26704 /dev/sdb1 [ 14.934883] BTRFS info (device sdb1): enabling auto defrag [ 14.934885] BTRFS info (device sdb1): disk space caching is enabled [ 15.808999] BTRFS: device label Dodatni devid 1 transid 28882 /dev/sdb5 [ 15.809631] BTRFS info (device sdb5): enabling auto defrag [ 15.809634] BTRFS info (device sdb5): disk space caching is enabled [ 16.976003] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 17.069728] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 17.121125] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 17.512685] Adding 16777212k swap on /media/LinuxNAS/swapfile. Priority:-1 extents:20 across:21618684k FS [ 17.801507] init: failsafe main process (922) killed by TERM signal [ 21.640364] init: Failed to spawn connman main process: unable to execute: No such file or directory [ 22.233132] init: avahi-cups-reload main process (1000) terminated with status 1 [ 22.727019] ppdev: user-space parallel port driver [ 22.830329] Bluetooth: Core ver 2.18 [ 22.830342] NET: Registered protocol family 31 [ 22.830343] Bluetooth: HCI device and connection manager initialized [ 22.830348] Bluetooth: HCI socket layer initialized [ 22.830349] Bluetooth: L2CAP socket layer initialized [ 22.830355] Bluetooth: SCO socket layer initialized [ 22.833975] Bluetooth: RFCOMM TTY layer initialized [ 22.833980] Bluetooth: RFCOMM socket layer initialized [ 22.833983] Bluetooth: RFCOMM ver 1.11 [ 22.948316] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.948318] Bluetooth: BNEP filters: protocol multicast [ 22.948325] Bluetooth: BNEP socket layer initialized [ 25.936539] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 26.037060] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 26.037154] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.996128] Ebtables v2.0 registered [ 27.037559] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.048690] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 27.537972] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 27.537980] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 27.538020] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 28.513374] postgres (1556): /proc/1556/oom_adj is deprecated, please use /proc/1556/oom_score_adj instead. [ 31.549525] vboxdrv: Found 4 processor cores. [ 31.550317] vboxdrv: fAsync=0 offMin=0x374 offMax=0x7a5a [ 31.550423] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 31.550425] vboxdrv: Successfully loaded version 4.3.8 (interface 0x001a0007). [ 31.793405] vboxpci: IOMMU not found (not registered) [ 46.647928] usblp 5-2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A [ 46.647968] usbcore: registered new interface driver usblp [ 46.672277] init: udev-fallback-graphics main process (4105) terminated with status 1 [ 48.330900] init: cryptdisks-enable main process (4106) killed by TERM signal [ 48.360407] init: plymouth-splash main process (4314) terminated with status 1 [ 51.386738] init: kdm main process (4458) killed by TERM signal [ 55.413140] nvidia 0000:01:00.0: irq 52 for MSI/MSI-X >> >> Everything is clear most of reserved RAM goes to VGA mapping? >> >> But, Windows resource monitor and task manager says just around 50MB >> hardware reserved? >> >> So I have tried different kernel boot parameters to no avail. >> So question is: Does Windows magically maps VGA to upper addresses >> (beyond 16GB) >> or simply Windows does not reports all reserved RAM? >> >> When I disable memory remap in BIOS Windows reports 500MB more reserved, >> but Linux adds this 500MB to 300MB reserved giving around 800MB. >> >> CPU is i5 3570k, motherboard z77, 16GB of DD3 RAM, AMI BIOS. >> >> Branimir. >> > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists