linux-kernel - Re: [RFC PATCH 02/12] pci: host: pcie-dra7xx: add support for pcie-dra7xx controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5332F01A.6090307@ti.com>
Date:	Wed, 26 Mar 2014 20:49:54 +0530
From:	Kishon Vijay Abraham I <kishon@...com>
To:	Rob Herring <robherring2@...il.com>
CC:	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	linux-omap <linux-omap@...r.kernel.org>,
	"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>, <mohit.kumar@...com>,
	Jingoo Han <jg1.han@...sung.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Rob Landley <rob@...dley.net>,
	Russell King - ARM Linux <linux@....linux.org.uk>,
	Tony Lindgren <tony@...mide.com>, <rnayak@...com>,
	"paul@...an.com" <paul@...an.com>
Subject: Re: [RFC PATCH 02/12] pci: host: pcie-dra7xx: add support for pcie-dra7xx
 controller



On Wednesday 26 March 2014 08:15 PM, Rob Herring wrote:
> On Wed, Mar 26, 2014 at 8:57 AM, Kishon Vijay Abraham I <kishon@...com> wrote:
>> Added support for pcie controller in dra7xx. This driver re-uses
>> the designware core code that is already present in kernel.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
>> ---
>>  Documentation/devicetree/bindings/pci/ti-pci.txt |   35 ++
>>  drivers/pci/host/Kconfig                         |   10 +
>>  drivers/pci/host/Makefile                        |    1 +
>>  drivers/pci/host/pcie-dra7xx.c                   |  411 ++++++++++++++++++++++
>>  4 files changed, 457 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt
>>  create mode 100644 drivers/pci/host/pcie-dra7xx.c
>>
>> diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
>> new file mode 100644
>> index 0000000..0528c47
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
>> @@ -0,0 +1,35 @@
>> +TI PCI Controllers
>> +
>> +PCIe Designware Controller
>> +This node should have the properties described in "designware-pcie.txt".
>> + - compatible: Should be "ti,dra7xx-pcie""
>> + - reg : Address and length of the register set for the device.
>> + - phys : the phandle for the PHY device (used by generic PHY framework)
>> + - phy-names : the names of the PHY corresponding to the PHYs present in the
>> +   *phy* phandle.
>> + - resets: phandle used if reset is handled be soc
> 
> s/be/by/ ?
> 
>> + - reset-names: name given to the phandle
>> + - ti,device-type: Should be 1 - EP TYPE, 2 - LEG EP TYPE OR 3 - RC TYPE
> 
> I don't think this makes sense. I'd imagine we'd need the binding to
> look quite a bit different if endpoint mode was actually supported. I

right, it makes sense to remove the ti,device-type altogether as this driver
only supports RC.
> think I would start defining endpoint mode with a different compatible
> string and go from there.
> 
>> +
>> +Example:
>> +pcie@...00000 {
>> +       compatible = "ti,dra7xx-pcie";
>> +       reg = <0x51002000 0x14c>, <0x51000000 0x2000>, <0x4A002540 0x1f>, <0x4A003c24 0x4>, <0x4AE07310 0x4>;
> 
> This is different number of entries from your actual dts. You need to
> define how many reg entries, what they are, and the order.

Ok. Will fix it.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/