| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Apr 2014 12:44:38 +0200 From: Krzysztof Kozlowski <k.kozlowski@...sung.com> To: Lee Jones <lee.jones@...aro.org> Cc: MyungJoo Ham <myungjoo.ham@...sung.com>, Chanwoo Choi <cw00.choi@...sung.com>, Samuel Ortiz <sameo@...ux.intel.com>, Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org, Kyungmin Park <kyungmin.park@...sung.com>, Marek Szyprowski <m.szyprowski@...sung.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com> Subject: Re: [PATCH v5 0/9] mfd: max14577: Add support for MAX77836 On śro, 2014-04-16 at 11:28 +0100, Lee Jones wrote: > > This is first part of fifth version of patchset adding support for > > MAX77836 device to the max14577 driver. > > > > I decided to split the patchset into smaller parts. I hope this would > > help in getting necessary review/acks from maintainers. > > > > The first part introduces changes in max14577 driver and adds support > > for MAX77836 in MFD, extcon and regulator drivers. Most of these > > patches already have required acks from maintainers. > > Full v4 patchset can be found here: > > http://thread.gmane.org/gmane.linux.kernel/1654267 > > So what's the plan for this driver now? What's missing? Do you have > all the Acks you need? If so, I'm happy to apply this patch-set and > supply a pull-request to the other maintainers. Next patches (part 2): 1. charger: max14577: Add support for MAX77836 charger 2. power: max17040: Add ID for MAX77836 Fuel Gauge block 3. regulator/mfd: max14577: Export symbols for calculating charger current 4. charger: max14577: Configure battery-dependent settings from DTS 5. Documentation: mfd: max14577: Add device tree bindings document 6. regulator: max14577: Implement SUSPEND mode for MAX77836 LDO-s They are quite independent from each other so I think it would be the best if you could prepare an immutable branch with first part of patches. Best regards, Krzysztof > > > Changes since v4 > > ================ > > 1. Updated Kconfig entries mentioning MAX77836. > > 2. Removed rename-like patches: > > [PATCH v4 02/16] mfd: max14577: Rename and add MAX14577 symbols > > [PATCH v4 03/16] mfd: max14577: Rename state container to maxim_core > > 3. Added new patches (not yet reviewed): > > [PATCH v5 2/9] mfd: max14577: Add muic prefix to regmap config > > [PATCH v5 6/9] mfd: max14577: Add MAX14577 prefix to IRQ defines > > 4. Rebased on 3.15-rc1. > > > > Changes since v3 > > ================ > > 1. Applied minor fixes (pointed by Lee Jones). > > 2. Added one ACK (Lee Jones) and Review-by (Tomasz Figa). > > 3. Patch 14/charger: Minor change in parsing EOC value from DTS. > > 4. Rebased on next-20140224. > > > > Changes since v2 > > ================ > > 1. Added ACK-s. > > 2. Applied minor checkpatch fixes (pointed by Lee Jones). > > 3. Rebased on next-20140217. > > > > Changes since v1 > > ================ > > 1. Added ACK-s, reviews and tested-by tags. > > 2. Removed applied patches (they were merged to the linux-next tree). > > 3. Applied comments from review (Lee Jones) to 5/15 (detection of device type) > > and 8/15 (add max77836 support to max14577). > > 4. Rebased on next tree. > > 5. Added patch 13 and 14 (pointed by Jenny Tc): > > - regulator/mfd: max14577: Export symbols for calculating charger current > > - charger: max14577: Configure battery-dependent settings from DTS > > 6. Updated bindings documentation with new charger bindings. > > Previous thread: > > - [PATCH 00/18] mfd: max14577: Add support for MAX77836 > > http://thread.gmane.org/gmane.linux.kernel/1636654/focus=1636674 > > > > > > Description > > =========== > > The MAX77836 is almost the same as MAX14577. Basically it is an extended > > version of MAX14577. The chipsets have same MUIC component so the extcon, > > charger and regulators require only little adjustments. More changes were > > needed in the charger (because it uses lower charging current) and regulator > > drivers (because mentioned different charing current and additional > > regulators). The MAX77836 has also PMIC and Fuel Gauge (which is the same > > as MAX17040/17048 Fuel Gauge). > > > > The MAX77836 uses three I2C slave addresses and has additional interrupts > > (related to PMIC and Fuel Gauge). It has also Interrupt Source register, > > just like MAX77686 and MAX77693. > > > > > > Best regards, > > Krzysztof Kozlowski > > > > > > Chanwoo Choi (1): > > extcon: max14577: Change extcon name instead of static name according > > to device type > > > > Krzysztof Kozlowski (8): > > mfd: max14577: Add muic prefix to regmap config > > mfd: max14577: Add detection of device type > > extcon: max14577: Add max14577 prefix to muic_irqs > > extcon: max14577: Choose muic_irqs according to device type > > mfd: max14577: Add MAX14577 prefix to IRQ defines > > mfd: max77836: Add MAX77836 support to max14577 driver > > extcon: max14577: Add support for MAX77836 > > regulator: max14577: Add support for MAX77836 regulators > > > > drivers/extcon/Kconfig | 4 +- > > drivers/extcon/extcon-max14577.c | 174 +++++++++++++------ > > drivers/mfd/Kconfig | 6 +- > > drivers/mfd/max14577.c | 315 ++++++++++++++++++++++++++++++----- > > drivers/regulator/Kconfig | 7 +- > > drivers/regulator/max14577.c | 277 ++++++++++++++++++++++++++---- > > include/linux/mfd/max14577-private.h | 222 ++++++++++++++++++------ > > include/linux/mfd/max14577.h | 19 ++- > > 8 files changed, 836 insertions(+), 188 deletions(-) > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists