[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <F4C251BF-666E-4E89-A6F7-3D96A669A8D8@jcrosoft.com>
Date: Fri, 16 May 2014 15:49:23 +0800
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
To: Paul Bolle <pebolle@...cali.nl>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>,
Andrew Victor <linux@...im.org.za>,
Nicolas FERRE <nicolas.ferre@...el.com>,
Russell King <linux@....linux.org.uk>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: at91: remove ISI code for AT91SAM9263
On May 15, 2014, at 4:34 PM, Paul Bolle <pebolle@...cali.nl> wrote:
>
> In v2.6.25 code was added for an Image Sensor Interface (ISI) for
> AT91SAM9263. That code depended on the Kconfig macro
> CONFIG_VIDEO_AT91_ISI and its MODULE variant. The related Kconfig symbol
> has never been added to the tree. The net effect of this was that
> at91_add_device_isi() was a NOP. No one noticed because no callers of
> that function were added to the tree at that time.
>
> The first caller of a function with that name was added in v3.4. But
> that caller apparently only called the function defined for AT91SAM9G45.
> (that function was also added in v3.4). So even then AT91SAM9263's NOP
> version of at91_add_device_isi() remained unused. This means that the
> ISI code for AT91SAM9263 can be removed.
>
Nack
this is just resources and allow until this is converted to DTS to have the pinctrl and register information
Best Regards,
J.
> Signed-off-by: Paul Bolle <pebolle@...cali.nl>
> ---
> Untested!
>
> Could someone please verify that this definition of
> at91_add_device_isi() really never will be called.
>
> arch/arm/mach-at91/at91sam9263_devices.c | 57 --------------------------------
> 1 file changed, 57 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
> index 43d53d6156dd..f2dab0a872a1 100644
> --- a/arch/arm/mach-at91/at91sam9263_devices.c
> +++ b/arch/arm/mach-at91/at91sam9263_devices.c
> @@ -897,63 +897,6 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
>
>
> /* --------------------------------------------------------------------
> - * Image Sensor Interface
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
> -
> -struct resource isi_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_ISI,
> - .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_isi_device = {
> - .name = "at91_isi",
> - .id = -1,
> - .resource = isi_resources,
> - .num_resources = ARRAY_SIZE(isi_resources),
> -};
> -
> -void __init at91_add_device_isi(struct isi_platform_data *data,
> - bool use_pck_as_mck)
> -{
> - at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
> - at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
> - at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
> - at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
> - at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
> - at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
> - at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
> - at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
> - at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
> - at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
> - at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
> - at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
> - at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
> - at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
> - at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
> -
> - if (use_pck_as_mck) {
> - at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
> -
> - /* TODO: register the PCK for ISI_MCK and set its parent */
> - }
> -}
> -#else
> -void __init at91_add_device_isi(struct isi_platform_data *data,
> - bool use_pck_as_mck) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> * Timer/Counter block
> * -------------------------------------------------------------------- */
>
> --
> 1.9.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists