[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1400712749-6490-1-git-send-email-m-karicheri2@ti.com>
Date: Wed, 21 May 2014 18:52:29 -0400
From: Murali Karicheri <m-karicheri2@...com>
To: <jg1.han@...sung.com>, <xobs@...agi.com>,
<devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <arnd@...db.de>
CC: Murali Karicheri <m-karicheri2@...com>,
Mohit Kumar <mohit.kumar@...com>,
Pratyush Anand <pratyush.anand@...com>,
Richard Zhu <r65037@...escale.com>,
Kishon Vijay Abraham I <kishon@...com>,
Marek Vasut <marex@...x.de>
Subject: [RFC PATCH] pcie-designware: DT documentation update to clarify DT properties
Current documentation is not clear enough about the mandatory bindings
to be present in the device node of a snps,dw-pcie compatible pcie
controller. In some cases the property is not present in all drivers.
For example pcie_bus is specified as a clock, but only one of the driver
uses it. This patch attempts to make the documentation consistent with
current implementation so that it is clear enough for anyone who develops
a dw-pcie compatible pcie driver.
CC: Mohit Kumar <mohit.kumar@...com>
CC: Jingoo Han <jg1.han@...sung.com>
CC: Pratyush Anand <pratyush.anand@...com>
CC: Richard Zhu <r65037@...escale.com>
CC: Kishon Vijay Abraham I <kishon@...com>
CC: Marek Vasut <marex@...x.de>
Signed-off-by: Murali Karicheri <m-karicheri2@...com>
---
.../devicetree/bindings/pci/designware-pcie.txt | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index d6fae13..8b9dc52 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -4,12 +4,14 @@ Required properties:
- compatible: should contain "snps,dw-pcie" to identify the
core, plus an identifier for the specific instance, such
as "samsung,exynos5440-pcie" or "fsl,imx6q-pcie".
-- reg: base addresses and lengths of the pcie controller,
- the phy controller, additional register for the phy controller.
+- reg: base addresses and lengths of the pcie controller.
+ index 0 - base address and length of RC's config space.
+ index 1 and above: additional registers for the PCI controller
+ that are specific to an implementation.
- interrupts: interrupt values for level interrupt,
pulse interrupt, special interrupt.
-- clocks: from common clock binding: handle to pci clock.
-- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
+- clocks: from common clock binding: handle to list of pci clock.
+- clock-names: from common clock binding: pci clock names: "pcie"
- #address-cells: set to <3>
- #size-cells: set to <2>
- device_type: set to "pci"
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists