| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 5 Jun 2014 13:25:57 -0700
From: Chaitanya Hazarey <c@...io>
To: gregkh@...uxfoundation.org, burzalodowa@...il.com,
peter.p.waskiewicz.jr@...el.com, anarey@...il.com
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Chaitanya Hazarey <c@...io>
Subject: [PATCH 2/3] Staging: rtl8192u: r8192U_core.c Rearranged statements to fix code-style errors
Rearranged statements around if and switch statements to address the following error:
ERROR: trailing statements should be on next line
Signed-off-by: Chaitanya Hazarey <c@...io>
---
drivers/staging/rtl8192u/r8192U_core.c | 553 ++++++++++++++++++++++++---------
1 file changed, 402 insertions(+), 151 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 2a9150d..a9922dd 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -905,7 +905,8 @@ inline u16 ieeerate2rtlrate(int rate)
static u16 rtl_rate[] = {10, 20, 55, 110, 60, 90, 120, 180, 240, 360, 480, 540};
inline u16 rtl8192_rate2rate(short rate)
{
- if (rate > 11) return 0;
+ if (rate > 11)
+ return 0;
return rtl_rate[rate];
}
@@ -1114,7 +1115,8 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv
tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
- if (tcb_desc->bAMPDUEnable) {//AMPDU enabled
+ if (tcb_desc->bAMPDUEnable)
+ {//AMPDU enabled
tx_fwinfo->AllowAggregation = 1;
/* DWORD 1 */
tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
@@ -1329,36 +1331,87 @@ static void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
for (i = 0; i < net->rates_len; i++) {
basic_rate = net->rates[i]&0x7f;
- switch (basic_rate) {
- case MGN_1M: *rate_config |= RRSR_1M; break;
- case MGN_2M: *rate_config |= RRSR_2M; break;
- case MGN_5_5M: *rate_config |= RRSR_5_5M; break;
- case MGN_11M: *rate_config |= RRSR_11M; break;
- case MGN_6M: *rate_config |= RRSR_6M; break;
- case MGN_9M: *rate_config |= RRSR_9M; break;
- case MGN_12M: *rate_config |= RRSR_12M; break;
- case MGN_18M: *rate_config |= RRSR_18M; break;
- case MGN_24M: *rate_config |= RRSR_24M; break;
- case MGN_36M: *rate_config |= RRSR_36M; break;
- case MGN_48M: *rate_config |= RRSR_48M; break;
- case MGN_54M: *rate_config |= RRSR_54M; break;
+ switch (basic_rate)
+ {
+ case MGN_1M:
+ *rate_config |= RRSR_1M;
+ break;
+ case MGN_2M:
+ *rate_config |= RRSR_2M;
+ break;
+ case MGN_5_5M:
+ *rate_config |= RRSR_5_5M;
+ break;
+ case MGN_11M:
+ *rate_config |= RRSR_11M;
+ break;
+ case MGN_6M:
+ *rate_config |= RRSR_6M;
+ break;
+ case MGN_9M:
+ *rate_config |= RRSR_9M;
+ break;
+ case MGN_12M:
+ *rate_config |= RRSR_12M;
+ break;
+ case MGN_18M:
+ *rate_config |= RRSR_18M;
+ break;
+ case MGN_24M:
+ *rate_config |= RRSR_24M;
+ break;
+ case MGN_36M:
+ *rate_config |= RRSR_36M;
+ break;
+ case MGN_48M:
+ *rate_config |= RRSR_48M;
+ break;
+ case MGN_54M:
+ *rate_config |= RRSR_54M;
+ break;
}
}
- for (i = 0; i < net->rates_ex_len; i++) {
+ for (i = 0; i < net->rates_ex_len; i++)
+ {
basic_rate = net->rates_ex[i]&0x7f;
- switch (basic_rate) {
- case MGN_1M: *rate_config |= RRSR_1M; break;
- case MGN_2M: *rate_config |= RRSR_2M; break;
- case MGN_5_5M: *rate_config |= RRSR_5_5M; break;
- case MGN_11M: *rate_config |= RRSR_11M; break;
- case MGN_6M: *rate_config |= RRSR_6M; break;
- case MGN_9M: *rate_config |= RRSR_9M; break;
- case MGN_12M: *rate_config |= RRSR_12M; break;
- case MGN_18M: *rate_config |= RRSR_18M; break;
- case MGN_24M: *rate_config |= RRSR_24M; break;
- case MGN_36M: *rate_config |= RRSR_36M; break;
- case MGN_48M: *rate_config |= RRSR_48M; break;
- case MGN_54M: *rate_config |= RRSR_54M; break;
+ switch (basic_rate)
+ {
+ case MGN_1M:
+ *rate_config |= RRSR_1M;
+ break;
+ case MGN_2M:
+ *rate_config |= RRSR_2M;
+ break;
+ case MGN_5_5M:
+ *rate_config |= RRSR_5_5M;
+ break;
+ case MGN_11M:
+ *rate_config |= RRSR_11M;
+ break;
+ case MGN_6M:
+ *rate_config |= RRSR_6M;
+ break;
+ case MGN_9M:
+ *rate_config |= RRSR_9M;
+ break;
+ case MGN_12M:
+ *rate_config |= RRSR_12M;
+ break;
+ case MGN_18M:
+ *rate_config |= RRSR_18M;
+ break;
+ case MGN_24M:
+ *rate_config |= RRSR_24M;
+ break;
+ case MGN_36M:
+ *rate_config |= RRSR_36M;
+ break;
+ case MGN_48M:
+ *rate_config |= RRSR_48M;
+ break;
+ case MGN_54M:
+ *rate_config |= RRSR_54M;
+ break;
}
}
}
@@ -1432,7 +1485,8 @@ inline u8 rtl8192_IsWirelessBMode(u16 rate)
{
if (((rate <= 110) && (rate != 60) && (rate != 90)) || (rate == 220))
return 1;
- else return 0;
+ else
+ return 0;
}
u16 N_DBPSOfRate(u16 DataRate);
@@ -1444,7 +1498,8 @@ u16 ComputeTxTime(u16 FrameLength, u16 DataRate, u8 bManagementFrame,
u16 N_DBPS;
u16 Ceiling;
- if (rtl8192_IsWirelessBMode(DataRate)) {
+ if (rtl8192_IsWirelessBMode(DataRate))
+ {
if (bManagementFrame || !bShortPreamble || DataRate == 10) // long preamble
FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10)));
else // Short preamble
@@ -1616,40 +1671,100 @@ static u8 MRateToHwRate8190Pci(u8 rate)
{
u8 ret = DESC90_RATE1M;
- switch (rate) {
- case MGN_1M: ret = DESC90_RATE1M; break;
- case MGN_2M: ret = DESC90_RATE2M; break;
- case MGN_5_5M: ret = DESC90_RATE5_5M; break;
- case MGN_11M: ret = DESC90_RATE11M; break;
- case MGN_6M: ret = DESC90_RATE6M; break;
- case MGN_9M: ret = DESC90_RATE9M; break;
- case MGN_12M: ret = DESC90_RATE12M; break;
- case MGN_18M: ret = DESC90_RATE18M; break;
- case MGN_24M: ret = DESC90_RATE24M; break;
- case MGN_36M: ret = DESC90_RATE36M; break;
- case MGN_48M: ret = DESC90_RATE48M; break;
- case MGN_54M: ret = DESC90_RATE54M; break;
-
- // HT rate since here
- case MGN_MCS0: ret = DESC90_RATEMCS0; break;
- case MGN_MCS1: ret = DESC90_RATEMCS1; break;
- case MGN_MCS2: ret = DESC90_RATEMCS2; break;
- case MGN_MCS3: ret = DESC90_RATEMCS3; break;
- case MGN_MCS4: ret = DESC90_RATEMCS4; break;
- case MGN_MCS5: ret = DESC90_RATEMCS5; break;
- case MGN_MCS6: ret = DESC90_RATEMCS6; break;
- case MGN_MCS7: ret = DESC90_RATEMCS7; break;
- case MGN_MCS8: ret = DESC90_RATEMCS8; break;
- case MGN_MCS9: ret = DESC90_RATEMCS9; break;
- case MGN_MCS10: ret = DESC90_RATEMCS10; break;
- case MGN_MCS11: ret = DESC90_RATEMCS11; break;
- case MGN_MCS12: ret = DESC90_RATEMCS12; break;
- case MGN_MCS13: ret = DESC90_RATEMCS13; break;
- case MGN_MCS14: ret = DESC90_RATEMCS14; break;
- case MGN_MCS15: ret = DESC90_RATEMCS15; break;
- case (0x80|0x20): ret = DESC90_RATEMCS32; break;
-
- default: break;
+ switch (rate)
+ {
+ case MGN_1M:
+ ret = DESC90_RATE1M;
+ break;
+ case MGN_2M:
+ ret = DESC90_RATE2M;
+ break;
+ case MGN_5_5M:
+ ret = DESC90_RATE5_5M;
+ break;
+ case MGN_11M:
+ ret = DESC90_RATE11M;
+ break;
+ case MGN_6M:
+ ret = DESC90_RATE6M;
+ break;
+ case MGN_9M:
+ ret = DESC90_RATE9M;
+ break;
+ case MGN_12M:
+ ret = DESC90_RATE12M;
+ break;
+ case MGN_18M:
+ ret = DESC90_RATE18M;
+ break;
+ case MGN_24M:
+ ret = DESC90_RATE24M;
+ break;
+ case MGN_36M:
+ ret = DESC90_RATE36M;
+ break;
+ case MGN_48M:
+ ret = DESC90_RATE48M;
+ break;
+ case MGN_54M:
+ ret = DESC90_RATE54M;
+ break;
+
+ // HT rate since here
+ case MGN_MCS0:
+ ret = DESC90_RATEMCS0;
+ break;
+ case MGN_MCS1:
+ ret = DESC90_RATEMCS1;
+ break;
+ case MGN_MCS2:
+ ret = DESC90_RATEMCS2;
+ break;
+ case MGN_MCS3:
+ ret = DESC90_RATEMCS3;
+ break;
+ case MGN_MCS4:
+ ret = DESC90_RATEMCS4;
+ break;
+ case MGN_MCS5:
+ ret = DESC90_RATEMCS5;
+ break;
+ case MGN_MCS6:
+ ret = DESC90_RATEMCS6;
+ break;
+ case MGN_MCS7:
+ ret = DESC90_RATEMCS7;
+ break;
+ case MGN_MCS8:
+ ret = DESC90_RATEMCS8;
+ break;
+ case MGN_MCS9:
+ ret = DESC90_RATEMCS9;
+ break;
+ case MGN_MCS10:
+ ret = DESC90_RATEMCS10;
+ break;
+ case MGN_MCS11:
+ ret = DESC90_RATEMCS11;
+ break;
+ case MGN_MCS12:
+ ret = DESC90_RATEMCS12;
+ break;
+ case MGN_MCS13:
+ ret = DESC90_RATEMCS13;
+ break;
+ case MGN_MCS14:
+ ret = DESC90_RATEMCS14;
+ break;
+ case MGN_MCS15:
+ ret = DESC90_RATEMCS15;
+ break;
+ case (0x80|0x20):
+ ret = DESC90_RATEMCS32;
+ break;
+
+ default:
+ break;
}
return ret;
}
@@ -1712,7 +1827,8 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
- if (tcb_desc->bAMPDUEnable) {//AMPDU enabled
+ if (tcb_desc->bAMPDUEnable) //AMPDU enabled
+ {
tx_fwinfo->AllowAggregation = 1;
/* DWORD 1 */
tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
@@ -2198,7 +2314,8 @@ void rtl8192_update_ratr_table(struct net_device *dev)
break;
case IEEE_N_24G:
case IEEE_N_5G:
- if (ieee->pHTInfo->PeerMimoPs == 0) {//MIMO_PS_STATIC
+ if (ieee->pHTInfo->PeerMimoPs == 0) //MIMO_PS_STATIC
+ {
ratr_value &= 0x0007F007;
} else {
if (priv->rf_type == RF_1T2R)
@@ -2582,7 +2699,8 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
else
priv->EEPROM_Def_Ver = 1;
RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
- if (priv->EEPROM_Def_Ver == 0) { //old eeprom definition
+ if (priv->EEPROM_Def_Ver == 0) //old eeprom definition
+ {
int i;
if (bLoad_From_EEPOM)
priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK>>1))&0xff) >> 8;
@@ -2993,13 +3111,15 @@ static bool rtl8192_adapter_start(struct net_device *dev)
//
#ifdef TO_DO_LIST
if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
- if (pMgntInfo->RegRfOff == TRUE) { // User disable RF via registry.
+ if (pMgntInfo->RegRfOff == TRUE) // User disable RF via registry.
+ {
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
// Those actions will be discard in MgntActSet_RF_State because of the same state
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
- } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { // H/W or S/W RF OFF before sleep.
+ } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) // H/W or S/W RF OFF before sleep.
+ {
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
} else {
@@ -3008,7 +3128,8 @@ static bool rtl8192_adapter_start(struct net_device *dev)
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n"));
}
} else {
- if (pHalData->eRFPowerState == eRfOff) {
+ if (pHalData->eRFPowerState == eRfOff)
+ {
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
// Those actions will be discard in MgntActSet_RF_State because of the same state
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
@@ -3017,7 +3138,8 @@ static bool rtl8192_adapter_start(struct net_device *dev)
}
#endif
//config RF.
- if (priv->ResetProgress == RESET_TYPE_NORESET) {
+ if (priv->ResetProgress == RESET_TYPE_NORESET)
+ {
rtl8192_phy_RFConfig(dev);
RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__);
}
@@ -3525,7 +3647,8 @@ void rtl819x_watchdog_wqcallback(struct work_struct *work)
}
if ((priv->force_reset) || (priv->ResetProgress == RESET_TYPE_NORESET &&
(priv->bForcedSilentReset ||
- (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) { // This is control by OID set in Pomelo
+ (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo
+ {
RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __func__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType);
rtl819x_ifsilentreset(dev);
}
@@ -3586,7 +3709,8 @@ int rtl8192_up(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- if (priv->up == 1) return -1;
+ if (priv->up == 1)
+ return -1;
return _rtl8192_up(dev);
}
@@ -3612,7 +3736,8 @@ int rtl8192_down(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
int i;
- if (priv->up == 0) return -1;
+ if (priv->up == 0)
+ return -1;
priv->up = 0;
priv->ieee80211->ieee_up = 0;
@@ -3650,7 +3775,8 @@ void rtl8192_commit(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
int reset_status = 0;
- if (priv->up == 0) return;
+ if (priv->up == 0)
+ return;
priv->up = 0;
rtl8192_cancel_deferred_work(priv);
@@ -3802,50 +3928,110 @@ static u8 HwRateToMRate90(bool bIsHT, u8 rate)
u8 ret_rate = 0xff;
if (!bIsHT) {
- switch (rate) {
- case DESC90_RATE1M: ret_rate = MGN_1M; break;
- case DESC90_RATE2M: ret_rate = MGN_2M; break;
- case DESC90_RATE5_5M: ret_rate = MGN_5_5M; break;
- case DESC90_RATE11M: ret_rate = MGN_11M; break;
- case DESC90_RATE6M: ret_rate = MGN_6M; break;
- case DESC90_RATE9M: ret_rate = MGN_9M; break;
- case DESC90_RATE12M: ret_rate = MGN_12M; break;
- case DESC90_RATE18M: ret_rate = MGN_18M; break;
- case DESC90_RATE24M: ret_rate = MGN_24M; break;
- case DESC90_RATE36M: ret_rate = MGN_36M; break;
- case DESC90_RATE48M: ret_rate = MGN_48M; break;
- case DESC90_RATE54M: ret_rate = MGN_54M; break;
+ switch (rate)
+ {
+ case DESC90_RATE1M:
+ ret_rate = MGN_1M;
+ break;
+ case DESC90_RATE2M:
+ ret_rate = MGN_2M;
+ break;
+ case DESC90_RATE5_5M:
+ ret_rate = MGN_5_5M;
+ break;
+ case DESC90_RATE11M:
+ ret_rate = MGN_11M;
+ break;
+ case DESC90_RATE6M:
+ ret_rate = MGN_6M;
+ break;
+ case DESC90_RATE9M:
+ ret_rate = MGN_9M;
+ break;
+ case DESC90_RATE12M:
+ ret_rate = MGN_12M;
+ break;
+ case DESC90_RATE18M:
+ ret_rate = MGN_18M;
+ break;
+ case DESC90_RATE24M:
+ ret_rate = MGN_24M;
+ break;
+ case DESC90_RATE36M:
+ ret_rate = MGN_36M;
+ break;
+ case DESC90_RATE48M:
+ ret_rate = MGN_48M;
+ break;
+ case DESC90_RATE54M:
+ ret_rate = MGN_54M;
+ break;
- default:
- ret_rate = 0xff;
- RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
- break;
+ default:
+ ret_rate = 0xff;
+ RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
+ break;
}
} else {
- switch (rate) {
- case DESC90_RATEMCS0: ret_rate = MGN_MCS0; break;
- case DESC90_RATEMCS1: ret_rate = MGN_MCS1; break;
- case DESC90_RATEMCS2: ret_rate = MGN_MCS2; break;
- case DESC90_RATEMCS3: ret_rate = MGN_MCS3; break;
- case DESC90_RATEMCS4: ret_rate = MGN_MCS4; break;
- case DESC90_RATEMCS5: ret_rate = MGN_MCS5; break;
- case DESC90_RATEMCS6: ret_rate = MGN_MCS6; break;
- case DESC90_RATEMCS7: ret_rate = MGN_MCS7; break;
- case DESC90_RATEMCS8: ret_rate = MGN_MCS8; break;
- case DESC90_RATEMCS9: ret_rate = MGN_MCS9; break;
- case DESC90_RATEMCS10: ret_rate = MGN_MCS10; break;
- case DESC90_RATEMCS11: ret_rate = MGN_MCS11; break;
- case DESC90_RATEMCS12: ret_rate = MGN_MCS12; break;
- case DESC90_RATEMCS13: ret_rate = MGN_MCS13; break;
- case DESC90_RATEMCS14: ret_rate = MGN_MCS14; break;
- case DESC90_RATEMCS15: ret_rate = MGN_MCS15; break;
- case DESC90_RATEMCS32: ret_rate = (0x80|0x20); break;
+ switch (rate)
+ {
+ case DESC90_RATEMCS0:
+ ret_rate = MGN_MCS0;
+ break;
+ case DESC90_RATEMCS1:
+ ret_rate = MGN_MCS1;
+ break;
+ case DESC90_RATEMCS2:
+ ret_rate = MGN_MCS2;
+ break;
+ case DESC90_RATEMCS3:
+ ret_rate = MGN_MCS3;
+ break;
+ case DESC90_RATEMCS4:
+ ret_rate = MGN_MCS4;
+ break;
+ case DESC90_RATEMCS5:
+ ret_rate = MGN_MCS5;
+ break;
+ case DESC90_RATEMCS6:
+ ret_rate = MGN_MCS6;
+ break;
+ case DESC90_RATEMCS7:
+ ret_rate = MGN_MCS7;
+ break;
+ case DESC90_RATEMCS8:
+ ret_rate = MGN_MCS8;
+ break;
+ case DESC90_RATEMCS9:
+ ret_rate = MGN_MCS9;
+ break;
+ case DESC90_RATEMCS10:
+ ret_rate = MGN_MCS10;
+ break;
+ case DESC90_RATEMCS11:
+ ret_rate = MGN_MCS11;
+ break;
+ case DESC90_RATEMCS12:
+ ret_rate = MGN_MCS12;
+ break;
+ case DESC90_RATEMCS13:
+ ret_rate = MGN_MCS13;
+ break;
+ case DESC90_RATEMCS14:
+ ret_rate = MGN_MCS14;
+ break;
+ case DESC90_RATEMCS15:
+ ret_rate = MGN_MCS15;
+ break;
+ case DESC90_RATEMCS32:
+ ret_rate = (0x80|0x20);
+ break;
- default:
- ret_rate = 0xff;
- RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
- break;
+ default:
+ ret_rate = 0xff;
+ RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
+ break;
}
}
@@ -3872,7 +4058,8 @@ static void UpdateRxPktTimeStamp8190(struct net_device *dev,
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- if (stats->bIsAMPDU && !stats->bFirstMPDU) {
+ if (stats->bIsAMPDU && !stats->bFirstMPDU)
+ {
stats->mac_time[0] = priv->LastRxDescTSFLow;
stats->mac_time[1] = priv->LastRxDescTSFHigh;
} else {
@@ -4063,8 +4250,10 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
}
// <2> Showed on UI for engineering
- if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) {
- for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) { // 2 spatial stream
+ if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA)
+ {
+ for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) // 2 spatial stream
+ {
if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1) {
if (priv->stats.rx_evm_percentage[nspatial_stream] == 0) // initialize
priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream];
@@ -4487,45 +4676,104 @@ UpdateReceivedRateHistogramStatistics8190(struct net_device *dev,
else
preamble_guardinterval = 0;// long
- switch (stats->rate) {
+ switch (stats->rate)
+ {
//
// CCK rate
//
- case MGN_1M: rateIndex = 0; break;
- case MGN_2M: rateIndex = 1; break;
- case MGN_5_5M: rateIndex = 2; break;
- case MGN_11M: rateIndex = 3; break;
+ case MGN_1M:
+ rateIndex = 0;
+ break;
+ case MGN_2M:
+ rateIndex = 1;
+ break;
+ case MGN_5_5M:
+ rateIndex = 2;
+ break;
+ case MGN_11M:
+ rateIndex = 3;
+ break;
//
// Legacy OFDM rate
//
- case MGN_6M: rateIndex = 4; break;
- case MGN_9M: rateIndex = 5; break;
- case MGN_12M: rateIndex = 6; break;
- case MGN_18M: rateIndex = 7; break;
- case MGN_24M: rateIndex = 8; break;
- case MGN_36M: rateIndex = 9; break;
- case MGN_48M: rateIndex = 10; break;
- case MGN_54M: rateIndex = 11; break;
+ case MGN_6M:
+ rateIndex = 4;
+ break;
+ case MGN_9M:
+ rateIndex = 5;
+ break;
+ case MGN_12M:
+ rateIndex = 6;
+ break;
+ case MGN_18M:
+ rateIndex = 7;
+ break;
+ case MGN_24M:
+ rateIndex = 8;
+ break;
+ case MGN_36M:
+ rateIndex = 9;
+ break;
+ case MGN_48M:
+ rateIndex = 10;
+ break;
+ case MGN_54M:
+ rateIndex = 11;
+ break;
//
// 11n High throughput rate
//
- case MGN_MCS0: rateIndex = 12; break;
- case MGN_MCS1: rateIndex = 13; break;
- case MGN_MCS2: rateIndex = 14; break;
- case MGN_MCS3: rateIndex = 15; break;
- case MGN_MCS4: rateIndex = 16; break;
- case MGN_MCS5: rateIndex = 17; break;
- case MGN_MCS6: rateIndex = 18; break;
- case MGN_MCS7: rateIndex = 19; break;
- case MGN_MCS8: rateIndex = 20; break;
- case MGN_MCS9: rateIndex = 21; break;
- case MGN_MCS10: rateIndex = 22; break;
- case MGN_MCS11: rateIndex = 23; break;
- case MGN_MCS12: rateIndex = 24; break;
- case MGN_MCS13: rateIndex = 25; break;
- case MGN_MCS14: rateIndex = 26; break;
- case MGN_MCS15: rateIndex = 27; break;
- default: rateIndex = 28; break;
+ case MGN_MCS0:
+ rateIndex = 12;
+ break;
+ case MGN_MCS1:
+ rateIndex = 13;
+ break;
+ case MGN_MCS2:
+ rateIndex = 14;
+ break;
+ case MGN_MCS3:
+ rateIndex = 15;
+ break;
+ case MGN_MCS4:
+ rateIndex = 16;
+ break;
+ case MGN_MCS5:
+ rateIndex = 17;
+ break;
+ case MGN_MCS6:
+ rateIndex = 18;
+ break;
+ case MGN_MCS7:
+ rateIndex = 19;
+ break;
+ case MGN_MCS8:
+ rateIndex = 20;
+ break;
+ case MGN_MCS9:
+ rateIndex = 21;
+ break;
+ case MGN_MCS10:
+ rateIndex = 22;
+ break;
+ case MGN_MCS11:
+ rateIndex = 23;
+ break;
+ case MGN_MCS12:
+ rateIndex = 24;
+ break;
+ case MGN_MCS13:
+ rateIndex = 25;
+ break;
+ case MGN_MCS14:
+ rateIndex = 26;
+ break;
+ case MGN_MCS15:
+ rateIndex = 27;
+ break;
+ default:
+ rateIndex = 28;
+ break;
}
priv->stats.received_preamble_GI[preamble_guardinterval][rateIndex]++;
priv->stats.received_rate_histogram[0][rateIndex]++; //total
@@ -5146,7 +5394,8 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
ieee->hwsec_active = 1;
- if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) { //add hwsec_support flag to totol control hw_sec on/off
+ if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) //add hwsec_support flag to totol control hw_sec on/off
+ {
ieee->hwsec_active = 0;
SECR_value &= ~SCR_RxDecEnable;
}
@@ -5178,14 +5427,16 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
TargetCommand = i+CAM_CONTENT_COUNT*EntryNo;
TargetCommand |= BIT31|BIT16;
- if (i == 0) { //MAC|Config
+ if (i == 0) //MAC|Config
+ {
TargetContent = (u32)(*(MacAddr+0)) << 16|
(u32)(*(MacAddr+1)) << 24|
(u32)usConfig;
write_nic_dword(dev, WCAMI, TargetContent);
write_nic_dword(dev, RWCAM, TargetCommand);
- } else if (i == 1) { //MAC
+ } else if (i == 1) //MAC
+ {
TargetContent = (u32)(*(MacAddr+2)) |
(u32)(*(MacAddr+3)) << 8|
(u32)(*(MacAddr+4)) << 16|
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists