| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1402000514-30752-1-git-send-email-dianders@chromium.org>
Date: Thu, 5 Jun 2014 13:35:14 -0700
From: Doug Anderson <dianders@...omium.org>
To: Tomasz Figa <t.figa@...sung.com>,
Mike Turquette <mturquette@...aro.org>,
Kukjin Kim <kgene.kim@...sung.com>
Cc: olof@...om.net, javier.martinez@...labora.co.uk,
Doug Anderson <dianders@...omium.org>, robh+dt@...nel.org,
pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
rahul.sharma@...sung.com, shaik.ameer@...sung.com,
arun.kk@...sung.com, alim.akhtar@...sung.com, a.hajda@...sung.com,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org
Subject: [PATCH v3] clk: exynos5420: Remove aclk66_peric from the clock tree description
The "aclk66_peric" clock is a gate clock with a whole bunch of gates
underneath it. This big gate isn't very useful to include in our
clock tree. If any of the children need to be turned on then the big
gate will need to be on anyway. ...and there are plenty of other "big
gates" that aren't described in our clock tree, some of which shut off
collections of clocks that have no relationship in the hierarchy so
are hard to model.
"aclk66_peric" is causing earlyprintk problems since it gets disabled
as part of the boot process, so let's just remove it.
Strangely (and for no good reason) this clock is exported as part of
the common clock bindings. Remove it since there are no in-kernel
device trees using it and no reason anyone out of tree should refer to
it either.
Signed-off-by: Doug Anderson <dianders@...omium.org>
---
Changes in v3:
- Now just remove aclk66_peric from the tree as suggested by Tomasz.
Changes in v2:
- Use GATE_A and clk_get(). Save the clock for putting later.
- Return 0 from exynos5420_clk_late_init().
drivers/clk/samsung/clk-exynos5420.c | 85 ++++++++++++++++++++++------------
include/dt-bindings/clock/exynos5420.h | 1 -
2 files changed, 55 insertions(+), 31 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 9d7d7ee..61eccf0 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -890,8 +890,6 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
- GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric",
- GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
GATE_BUS_TOP, 13, 0, 0),
GATE(0, "aclk166", "mout_user_aclk166",
@@ -994,34 +992,61 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
/* PERIC Block */
- GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0),
- GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0),
- GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0),
- GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0),
- GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0),
- GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0),
- GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0),
- GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0),
- GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0),
- GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0),
- GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0),
- GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0),
- GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0),
- GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0),
- GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0),
- GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0),
- GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0),
- GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0),
- GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0),
- GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0),
- GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0),
- GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0),
- GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0),
- GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0),
- GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0),
- GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0),
-
- GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
+ GATE(CLK_UART0, "uart0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 0, 0, 0),
+ GATE(CLK_UART1, "uart1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 1, 0, 0),
+ GATE(CLK_UART2, "uart2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 2, 0, 0),
+ GATE(CLK_UART3, "uart3", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 3, 0, 0),
+ GATE(CLK_I2C0, "i2c0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 6, 0, 0),
+ GATE(CLK_I2C1, "i2c1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 7, 0, 0),
+ GATE(CLK_I2C2, "i2c2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 8, 0, 0),
+ GATE(CLK_I2C3, "i2c3", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 9, 0, 0),
+ GATE(CLK_USI0, "usi0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 10, 0, 0),
+ GATE(CLK_USI1, "usi1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 11, 0, 0),
+ GATE(CLK_USI2, "usi2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 12, 0, 0),
+ GATE(CLK_USI3, "usi3", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 13, 0, 0),
+ GATE(CLK_I2C_HDMI, "i2c_hdmi", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 14, 0, 0),
+ GATE(CLK_TSADC, "tsadc", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 15, 0, 0),
+ GATE(CLK_SPI0, "spi0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 16, 0, 0),
+ GATE(CLK_SPI1, "spi1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 17, 0, 0),
+ GATE(CLK_SPI2, "spi2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 18, 0, 0),
+ GATE(CLK_I2S1, "i2s1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 20, 0, 0),
+ GATE(CLK_I2S2, "i2s2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 21, 0, 0),
+ GATE(CLK_PCM1, "pcm1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 22, 0, 0),
+ GATE(CLK_PCM2, "pcm2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 23, 0, 0),
+ GATE(CLK_PWM, "pwm", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 24, 0, 0),
+ GATE(CLK_SPDIF, "spdif", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 26, 0, 0),
+ GATE(CLK_USI4, "usi4", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 28, 0, 0),
+ GATE(CLK_USI5, "usi5", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 30, 0, 0),
+ GATE(CLK_USI6, "usi6", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 31, 0, 0),
+
+ GATE(CLK_KEYIF, "keyif", "mout_user_aclk66_peric",
+ GATE_BUS_PERIC, 22, 0, 0),
/* PERIS Block */
GATE(CLK_CHIPID, "chipid", "aclk66_psgen",
diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
index 97dcb89..14e1c8f 100644
--- a/include/dt-bindings/clock/exynos5420.h
+++ b/include/dt-bindings/clock/exynos5420.h
@@ -63,7 +63,6 @@
#define CLK_SCLK_MPHY_IXTAL24 161
/* gate clocks */
-#define CLK_ACLK66_PERIC 256
#define CLK_UART0 257
#define CLK_UART1 258
#define CLK_UART2 259
--
2.0.0.526.g5318336
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists