[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140618141048.GA15956@lee--X1>
Date: Wed, 18 Jun 2014 15:10:48 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Cc: Samuel Ortiz <sameo@...ux.intel.com>,
Mark Brown <broonie@...nel.org>,
Mike Turquette <mturquette@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Kukjin Kim <kgene.kim@...sung.com>,
Doug Anderson <dianders@...omium.org>,
Olof Johansson <olof@...om.net>,
Sjoerd Simons <sjoerd.simons@...labora.co.uk>,
Daniel Stone <daniels@...labora.com>,
Tomeu Vizoso <tomeu.vizoso@...labora.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 07/10] regulator: Add driver for Maxim 77802 PMIC
regulators
On Wed, 18 Jun 2014, Javier Martinez Canillas wrote:
> Hello Lee,
>
> Thanks a lot for your feedback.
>
> On 06/17/2014 11:17 PM, Lee Jones wrote:
> >> The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout
> >> (LDO) regulators. This patch adds support for all these regulators
> >> found on the MAX77802 PMIC and is based on a driver added by Simon
> >> Glass to the Chrome OS kernel 3.8 tree.
> >>
> >> Signed-off-by: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
> >> ---
> >>
> >> Changes since v1:
> >> - Remove unneeded check if num_regulators != MAX77802_MAX_REGULATORS.
> >> - Fix .set_suspend_mode handler comment and split regulators ops for
> >> regulators that behave differently. Suggested by Mark Brown.
> >> - Use module_platform_driver() instead of having init/exit functions.
> >> Suggested by Mark Brown.
> >> - Use the new descriptor-based GPIO interface instead of the deprecated
> >> integer based GPIO one. Suggested by Mark Brown.
> >> - Look for "regulators" child node instead of "voltage-regulators" to be
> >> consistent with other PMIC drivers. Suggested by Mark Brown.
> >>
> >> drivers/mfd/max77802.c | 1 +
> >
> > Can you remove all of the MFD changes from patches 7, 8 and 9 and
> > create new one. That way there's no requirement for any cross
> > subsystem messiness.
> >
>
> Sure, Mark already suggested the same and I'll do it on the next version.
>
> But there still be some cross-subsystem dependency/messiness since the
> regulator, clk and rtc drivers include the mfd max77802 headers that are added
> in Patch 6.
What I should have said was _avoidable_ or _unnecessary_ messiness.
> So I guess you should either a) take the whole patch-set through your mfd tree
> or b) merge the mfd patches and create an immutable branch that can be pulled by
> Mark, Mike and Alessandro.
>
> I don't know what's the preferred workflow in these cases...
That's fine. I'm happy to create shared branches when required.
> >> drivers/regulator/Kconfig | 9 +
> >> drivers/regulator/Makefile | 1 +
> >> drivers/regulator/max77802.c | 701 +++++++++++++++++++++++++++++++++++++++++++
> >> 4 files changed, 712 insertions(+)
> >> create mode 100644 drivers/regulator/max77802.c
> >
>
> Best regards,
> Javier
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists