linux-kernel - [PATCH 08/13] AT91: PIT: use request_irq instead of setup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1403701605-26678-9-git-send-email-maxime.ripard@free-electrons.com>
Date:	Wed, 25 Jun 2014 15:06:40 +0200
From:	Maxime Ripard <maxime.ripard@...e-electrons.com>
To:	linux@...im.org.za, Nicolas Ferre <nicolas.ferre@...el.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Daniel Lezcano <daniel.lezcano@...aro.org>
Cc:	Boris Brezillon <boris@...e-electrons.com>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	Thomas Petazzoni <thomas@...e-electrons.com>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH 08/13] AT91: PIT: use request_irq instead of setup_irq

We can use the generic request_irq now to register a timer interrupt handler,
instead of the more complex setup_irq.

Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
 arch/arm/mach-at91/at91sam926x_time.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 5423894bb0fc..9678ac391a81 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -173,16 +173,10 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static struct irqaction at91sam926x_pit_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91sam926x_pit_interrupt,
-};
-
 /*
  * Set up both clocksource and clockevent support.
  */
-static void __init at91sam926x_pit_common_init(void)
+static void __init at91sam926x_pit_common_init(unsigned int pit_irq)
 {
 	unsigned long	pit_rate;
 	unsigned	bits;
@@ -208,7 +202,9 @@ static void __init at91sam926x_pit_common_init(void)
 	clocksource_register_hz(&pit_clk, pit_rate);
 
 	/* Set up irq handler */
-	ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq);
+	ret = request_irq(pit_irq, at91sam926x_pit_interrupt,
+			  IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
+			  "at91_tick", pit_base_addr);
 	if (ret)
 		panic(pr_fmt("Unable to setup IRQ\n"));
 
@@ -239,9 +235,7 @@ static void __init at91sam926x_pit_dt_init(struct device_node *node)
 	if (!irq)
 		panic(pr_fmt("Unable to get IRQ from DT\n"));
 
-	at91sam926x_pit_irq.irq = irq;
-
-	at91sam926x_pit_common_init();
+	at91sam926x_pit_common_init(irq);
 }
 CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
 		       at91sam926x_pit_dt_init);
@@ -252,9 +246,7 @@ void __init at91sam926x_pit_init(void)
 	if (IS_ERR(mck))
 		panic(pr_fmt("Unable to get mck clk\n"));
 
-	at91sam926x_pit_irq.irq = NR_IRQS_LEGACY + AT91_ID_SYS;
-
-	at91sam926x_pit_common_init();
+	at91sam926x_pit_common_init(NR_IRQS_LEGACY + AT91_ID_SYS);
 }
 
 void __init at91sam926x_ioremap_pit(u32 addr)
-- 
2.0.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/