linux-kernel - [PATCH 07/13] AT91: PIT: Use pr

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1403701605-26678-8-git-send-email-maxime.ripard@free-electrons.com>
Date:	Wed, 25 Jun 2014 15:06:39 +0200
From:	Maxime Ripard <maxime.ripard@...e-electrons.com>
To:	linux@...im.org.za, Nicolas Ferre <nicolas.ferre@...el.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Daniel Lezcano <daniel.lezcano@...aro.org>
Cc:	Boris Brezillon <boris@...e-electrons.com>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	Thomas Petazzoni <thomas@...e-electrons.com>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH 07/13] AT91: PIT: Use pr_fmt

All the panic messages hardcode the same prefix. Define the pr_fmt macro to
unify its definition.

Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
 arch/arm/mach-at91/at91sam926x_time.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index c2262988f638..5423894bb0fc 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -10,6 +10,8 @@
  * published by the Free Software Foundation.
  */
 
+#define pr_fmt(fmt)	"AT91: PIT: " fmt
+
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
@@ -208,7 +210,7 @@ static void __init at91sam926x_pit_common_init(void)
 	/* Set up irq handler */
 	ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq);
 	if (ret)
-		panic("AT91: PIT: Unable to setup IRQ\n");
+		panic(pr_fmt("Unable to setup IRQ\n"));
 
 	/* Set up and register clockevents */
 	pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
@@ -222,7 +224,7 @@ static void __init at91sam926x_pit_dt_init(struct device_node *node)
 
 	pit_base_addr = of_iomap(node, 0);
 	if (!pit_base_addr)
-		panic("AT91: PIT: Could not map PIT address\n");
+		panic(pr_fmt("Could not map PIT address\n"));
 
 	mck = of_clk_get(node, 0);
 	if (IS_ERR(mck))
@@ -230,12 +232,12 @@ static void __init at91sam926x_pit_dt_init(struct device_node *node)
 		mck = clk_get(NULL, "mck");
 
 	if (IS_ERR(mck))
-		panic("AT91: PIT: Unable to get mck clk\n");
+		panic(pr_fmt("Unable to get mck clk\n"));
 
 	/* Get the interrupts property */
 	irq = irq_of_parse_and_map(node, 0);
 	if (!irq)
-		panic("AT91: PIT: Unable to get IRQ from DT\n");
+		panic(pr_fmt("Unable to get IRQ from DT\n"));
 
 	at91sam926x_pit_irq.irq = irq;
 
@@ -248,7 +250,7 @@ void __init at91sam926x_pit_init(void)
 {
 	mck = clk_get(NULL, "mck");
 	if (IS_ERR(mck))
-		panic("AT91: PIT: Unable to get mck clk\n");
+		panic(pr_fmt("Unable to get mck clk\n"));
 
 	at91sam926x_pit_irq.irq = NR_IRQS_LEGACY + AT91_ID_SYS;
 
@@ -263,5 +265,5 @@ void __init at91sam926x_ioremap_pit(u32 addr)
 	pit_base_addr = ioremap(addr, 16);
 
 	if (!pit_base_addr)
-		panic("Impossible to ioremap PIT\n");
+		panic(pr_fmt("Impossible to ioremap PIT\n"));
 }
-- 
2.0.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/