linux-kernel - [PATCH 24/94] clocksource: exynos_mct: Register the timer for stable udelay

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1405443709-15288-24-git-send-email-asadi.samuel@gmail.com>
Date:	Tue, 15 Jul 2014 20:00:39 +0300
From:	Sam Asadi <asadi.samuel@...il.com>
To:	gregkh@...uxfoundation.org
Cc:	devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
	Amit Daniel Kachhap <amit.daniel@...sung.com>,
	Doug Anderson <dianders@...omium.org>,
	Kukjin Kim <kgene.kim@...sung.com>,
	sam-the-6 <asadi.samuel@...il.com>
Subject: [PATCH 24/94] clocksource: exynos_mct: Register the timer for stable udelay

From: Amit Daniel Kachhap <amit.daniel@...sung.com>

This patch registers the exynos mct clocksource as the current timer
as it has constant clock rate. This will generate correct udelay for
the exynos platform and avoid using unnecessary calibrated
jiffies. This change has been tested on exynos5420 based board and
udelay is very close to expected.

Without this patch udelay() on exynos5400 / exynos5800 is wildly
inaccurate due to big.LITTLE not adjusting loops_per_jiffy correctly.
Also without this patch udelay() on exynos5250 can be innacruate
during transitions between frequencies < 800 MHz (you'll go 200 MHz ->
800 MHz -> 300 MHz and will run at 800 MHz for a time with the wrong
loops_per_jiffy).

[dianders: reworked and created version 3]

Signed-off-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
Signed-off-by: Doug Anderson <dianders@...omium.org>
Signed-off-by: Kukjin Kim <kgene.kim@...sung.com>
Signed-off-by: sam-the-6 <asadi.samuel@...il.com>
---
 drivers/clocksource/exynos_mct.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 5ce99c0..ab51bf20a 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -200,10 +200,21 @@ static u64 notrace exynos4_read_sched_clock(void)
 	return _exynos4_frc_read();
 }
 
+static struct delay_timer exynos4_delay_timer;
+
+static cycles_t exynos4_read_current_timer(void)
+{
+	return _exynos4_frc_read();
+}
+
 static void __init exynos4_clocksource_init(void)
 {
 	exynos4_mct_frc_start();
 
+	exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
+	exynos4_delay_timer.freq = clk_rate;
+	register_current_timer_delay(&exynos4_delay_timer);
+
 	if (clocksource_register_hz(&mct_frc, clk_rate))
 		panic("%s: can't register clocksource\n", mct_frc.name);
 
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/