[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <201407211058.s6LAwtk8003839@swsrvapps-01.diasemi.com>
Date: Mon, 21 Jul 2014 11:39:33 +0100
From: "Opensource [Steve Twiss]" <stwiss.opensource@...semi.com>
To: Alessandro Zummo <a.zummo@...ertech.it>,
Andrew Morton <akpm@...ux-foundation.org>,
LINUX-KERNEL <linux-kernel@...r.kernel.org>,
Lee Jones <lee.jones@...aro.org>,
RTC-LINUX <rtc-linux@...glegroups.com>,
Samuel Ortiz <sameo@...ux.intel.com>
CC: David Dajun Chen <david.chen@...semi.com>,
Mark Brown <broonie@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Support Opensource <support.opensource@...semi.com>
Subject: [RFC V2] mfd: da9063: Add support for AD silicon variant
From: Opensource [Steve Twiss] <stwiss.opensource@...semi.com>
Add register definitions for DA9063 AD (0x3) silicon variant ID
the ability to choose the silicon variant at run-time using regmap
configuration. This patch also adds RTC support for the AD silicon
changes.
It adds both BB and AD support as regmap ranges and then makes the
distinction between the two tables at run-time. This allows both AD
and BB silicon variants to be supported at the same time.
Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@...semi.com>
Suggested-by: Philipp Zabel <p.zabel@...gutronix.de>
---
Checks performed with linux-next/v3.16-rc5/scripts/checkpatch.pl
rtc-da9063.c total: 0 errors, 0 warnings, 353 lines checked
da9063-core.c total: 0 errors, 0 warnings, 188 lines checked
da9063-i2c.c total: 0 errors, 0 warnings, 266 lines checked
core.h total: 0 errors, 0 warnings, 98 lines checked
registers.h total: 0 errors, 0 warnings, 1073 lines checked
Thank you for your quick responses to my RFC-V1.
This is in reply to comments made by Lee Jones, Alessandro Zummo and
Philipp Zabel. Please see the RFC-V1 thread for further details on
these discussions: https://lkml.org/lkml/2014/7/16/478
Adding AD support using a compile-time flag under a new menu item in
Kconfig proved very unpopular for two main reasons.
- Using ifdef else statements throughout the code
- Not supporting AD and BB silicon variants at the same time
This RFC-V2 patch uses the method proposed by Philipp Zabel in his
reply e-mail: https://lkml.org/lkml/2014/7/18/219
and makes use of the regmap configuration method in da9063-i2c.c
This patch applies against linux-next and v3.16-rc5
Regards,
Steve Twiss, Dialog Semiconductor Ltd.
drivers/mfd/da9063-core.c | 6 +-
drivers/mfd/da9063-i2c.c | 134 +++++++++++++++++++++++++++-------
drivers/rtc/rtc-da9063.c | 54 +++++++++-----
include/linux/mfd/da9063/core.h | 3 +-
include/linux/mfd/da9063/registers.h | 129 +++++++++++++++++++++-----------
5 files changed, 236 insertions(+), 90 deletions(-)
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index e70ae31..93db8bb 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -153,9 +153,9 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
"Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n",
model, variant_id);
- if (variant_code != PMIC_DA9063_BB) {
- dev_err(da9063->dev, "Unknown chip variant code: 0x%02X\n",
- variant_code);
+ if (variant_code < PMIC_DA9063_BB && variant_code != PMIC_DA9063_AD) {
+ dev_err(da9063->dev,
+ "Cannot support variant code: 0x%02X\n", variant_code);
return -ENODEV;
}
diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c
index 8db5c80..21fd8d9 100644
--- a/drivers/mfd/da9063-i2c.c
+++ b/drivers/mfd/da9063-i2c.c
@@ -25,10 +25,10 @@
#include <linux/mfd/da9063/pdata.h>
#include <linux/mfd/da9063/registers.h>
-static const struct regmap_range da9063_readable_ranges[] = {
+static const struct regmap_range da9063_ad_readable_ranges[] = {
{
.range_min = DA9063_REG_PAGE_CON,
- .range_max = DA9063_REG_SECOND_D,
+ .range_max = DA9063_AD_REG_SECOND_D,
}, {
.range_min = DA9063_REG_SEQ,
.range_max = DA9063_REG_ID_32_31,
@@ -37,14 +37,14 @@ static const struct regmap_range da9063_readable_ranges[] = {
.range_max = DA9063_REG_AUTO3_LOW,
}, {
.range_min = DA9063_REG_T_OFFSET,
- .range_max = DA9063_REG_GP_ID_19,
+ .range_max = DA9063_AD_REG_GP_ID_19,
}, {
.range_min = DA9063_REG_CHIP_ID,
.range_max = DA9063_REG_CHIP_VARIANT,
},
};
-static const struct regmap_range da9063_writeable_ranges[] = {
+static const struct regmap_range da9063_ad_writeable_ranges[] = {
{
.range_min = DA9063_REG_PAGE_CON,
.range_max = DA9063_REG_PAGE_CON,
@@ -53,7 +53,7 @@ static const struct regmap_range da9063_writeable_ranges[] = {
.range_max = DA9063_REG_VSYS_MON,
}, {
.range_min = DA9063_REG_COUNT_S,
- .range_max = DA9063_REG_ALARM_Y,
+ .range_max = DA9063_AD_REG_ALARM_Y,
}, {
.range_min = DA9063_REG_SEQ,
.range_max = DA9063_REG_ID_32_31,
@@ -62,14 +62,14 @@ static const struct regmap_range da9063_writeable_ranges[] = {
.range_max = DA9063_REG_AUTO3_LOW,
}, {
.range_min = DA9063_REG_CONFIG_I,
- .range_max = DA9063_REG_MON_REG_4,
+ .range_max = DA9063_AD_REG_MON_REG_4,
}, {
- .range_min = DA9063_REG_GP_ID_0,
- .range_max = DA9063_REG_GP_ID_19,
+ .range_min = DA9063_AD_REG_GP_ID_0,
+ .range_max = DA9063_AD_REG_GP_ID_19,
},
};
-static const struct regmap_range da9063_volatile_ranges[] = {
+static const struct regmap_range da9063_ad_volatile_ranges[] = {
{
.range_min = DA9063_REG_STATUS_A,
.range_max = DA9063_REG_EVENT_D,
@@ -81,26 +81,104 @@ static const struct regmap_range da9063_volatile_ranges[] = {
.range_max = DA9063_REG_ADC_MAN,
}, {
.range_min = DA9063_REG_ADC_RES_L,
- .range_max = DA9063_REG_SECOND_D,
+ .range_max = DA9063_AD_REG_SECOND_D,
}, {
- .range_min = DA9063_REG_MON_REG_5,
- .range_max = DA9063_REG_MON_REG_6,
+ .range_min = DA9063_AD_REG_MON_REG_5,
+ .range_max = DA9063_AD_REG_MON_REG_6,
},
};
-static const struct regmap_access_table da9063_readable_table = {
- .yes_ranges = da9063_readable_ranges,
- .n_yes_ranges = ARRAY_SIZE(da9063_readable_ranges),
+static const struct regmap_access_table da9063_ad_readable_table = {
+ .yes_ranges = da9063_ad_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_ad_readable_ranges),
};
-static const struct regmap_access_table da9063_writeable_table = {
- .yes_ranges = da9063_writeable_ranges,
- .n_yes_ranges = ARRAY_SIZE(da9063_writeable_ranges),
+static const struct regmap_access_table da9063_ad_writeable_table = {
+ .yes_ranges = da9063_ad_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_ad_writeable_ranges),
};
-static const struct regmap_access_table da9063_volatile_table = {
- .yes_ranges = da9063_volatile_ranges,
- .n_yes_ranges = ARRAY_SIZE(da9063_volatile_ranges),
+static const struct regmap_access_table da9063_ad_volatile_table = {
+ .yes_ranges = da9063_ad_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_ad_volatile_ranges),
+};
+
+static const struct regmap_range da9063_bb_readable_ranges[] = {
+ {
+ .range_min = DA9063_REG_PAGE_CON,
+ .range_max = DA9063_BB_REG_SECOND_D,
+ }, {
+ .range_min = DA9063_REG_SEQ,
+ .range_max = DA9063_REG_ID_32_31,
+ }, {
+ .range_min = DA9063_REG_SEQ_A,
+ .range_max = DA9063_REG_AUTO3_LOW,
+ }, {
+ .range_min = DA9063_REG_T_OFFSET,
+ .range_max = DA9063_BB_REG_GP_ID_19,
+ }, {
+ .range_min = DA9063_REG_CHIP_ID,
+ .range_max = DA9063_REG_CHIP_VARIANT,
+ },
+};
+
+static const struct regmap_range da9063_bb_writeable_ranges[] = {
+ {
+ .range_min = DA9063_REG_PAGE_CON,
+ .range_max = DA9063_REG_PAGE_CON,
+ }, {
+ .range_min = DA9063_REG_FAULT_LOG,
+ .range_max = DA9063_REG_VSYS_MON,
+ }, {
+ .range_min = DA9063_REG_COUNT_S,
+ .range_max = DA9063_BB_REG_ALARM_Y,
+ }, {
+ .range_min = DA9063_REG_SEQ,
+ .range_max = DA9063_REG_ID_32_31,
+ }, {
+ .range_min = DA9063_REG_SEQ_A,
+ .range_max = DA9063_REG_AUTO3_LOW,
+ }, {
+ .range_min = DA9063_REG_CONFIG_I,
+ .range_max = DA9063_BB_REG_MON_REG_4,
+ }, {
+ .range_min = DA9063_BB_REG_GP_ID_0,
+ .range_max = DA9063_BB_REG_GP_ID_19,
+ },
+};
+
+static const struct regmap_range da9063_bb_volatile_ranges[] = {
+ {
+ .range_min = DA9063_REG_STATUS_A,
+ .range_max = DA9063_REG_EVENT_D,
+ }, {
+ .range_min = DA9063_REG_CONTROL_F,
+ .range_max = DA9063_REG_CONTROL_F,
+ }, {
+ .range_min = DA9063_REG_ADC_MAN,
+ .range_max = DA9063_REG_ADC_MAN,
+ }, {
+ .range_min = DA9063_REG_ADC_RES_L,
+ .range_max = DA9063_BB_REG_SECOND_D,
+ }, {
+ .range_min = DA9063_BB_REG_MON_REG_5,
+ .range_max = DA9063_BB_REG_MON_REG_6,
+ },
+};
+
+static const struct regmap_access_table da9063_bb_readable_table = {
+ .yes_ranges = da9063_bb_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_bb_readable_ranges),
+};
+
+static const struct regmap_access_table da9063_bb_writeable_table = {
+ .yes_ranges = da9063_bb_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_bb_writeable_ranges),
+};
+
+static const struct regmap_access_table da9063_bb_volatile_table = {
+ .yes_ranges = da9063_bb_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9063_bb_volatile_ranges),
};
static const struct regmap_range_cfg da9063_range_cfg[] = {
@@ -123,10 +201,6 @@ static struct regmap_config da9063_regmap_config = {
.max_register = DA9063_REG_CHIP_VARIANT,
.cache_type = REGCACHE_RBTREE,
-
- .rd_table = &da9063_readable_table,
- .wr_table = &da9063_writeable_table,
- .volatile_table = &da9063_volatile_table,
};
static int da9063_i2c_probe(struct i2c_client *i2c,
@@ -143,6 +217,16 @@ static int da9063_i2c_probe(struct i2c_client *i2c,
da9063->dev = &i2c->dev;
da9063->chip_irq = i2c->irq;
+ if (da9063->variant_code == PMIC_DA9063_AD) {
+ da9063_regmap_config.rd_table = &da9063_ad_readable_table;
+ da9063_regmap_config.wr_table = &da9063_ad_writeable_table;
+ da9063_regmap_config.volatile_table = &da9063_ad_volatile_table;
+ } else {
+ da9063_regmap_config.rd_table = &da9063_bb_readable_table;
+ da9063_regmap_config.wr_table = &da9063_bb_writeable_table;
+ da9063_regmap_config.volatile_table = &da9063_bb_volatile_table;
+ }
+
da9063->regmap = devm_regmap_init_i2c(i2c, &da9063_regmap_config);
if (IS_ERR(da9063->regmap)) {
ret = PTR_ERR(da9063->regmap);
diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index 5953930..731ed1a 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -29,6 +29,8 @@
#define YEARS_FROM_DA9063(year) ((year) + 100)
#define MONTHS_FROM_DA9063(month) ((month) - 1)
+#define RTC_ALARM_DATA_LEN (DA9063_AD_REG_ALARM_Y - DA9063_AD_REG_ALARM_MI + 1)
+
#define RTC_DATA_LEN (DA9063_REG_COUNT_Y - DA9063_REG_COUNT_S + 1)
#define RTC_SEC 0
#define RTC_MIN 1
@@ -42,6 +44,10 @@ struct da9063_rtc {
struct da9063 *hw;
struct rtc_time alarm_time;
bool rtc_sync;
+ int alarm_year;
+ int alarm_start;
+ int alarm_len;
+ int data_start;
};
static void da9063_data_to_tm(u8 *data, struct rtc_time *tm)
@@ -83,7 +89,7 @@ static int da9063_rtc_stop_alarm(struct device *dev)
{
struct da9063_rtc *rtc = dev_get_drvdata(dev);
- return regmap_update_bits(rtc->hw->regmap, DA9063_REG_ALARM_Y,
+ return regmap_update_bits(rtc->hw->regmap, rtc->alarm_year,
DA9063_ALARM_ON, 0);
}
@@ -91,7 +97,7 @@ static int da9063_rtc_start_alarm(struct device *dev)
{
struct da9063_rtc *rtc = dev_get_drvdata(dev);
- return regmap_update_bits(rtc->hw->regmap, DA9063_REG_ALARM_Y,
+ return regmap_update_bits(rtc->hw->regmap, rtc->alarm_year,
DA9063_ALARM_ON, DA9063_ALARM_ON);
}
@@ -151,8 +157,9 @@ static int da9063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
int ret;
unsigned int val;
- ret = regmap_bulk_read(rtc->hw->regmap, DA9063_REG_ALARM_S,
- &data[RTC_SEC], RTC_DATA_LEN);
+ data[RTC_SEC] = 0;
+ ret = regmap_bulk_read(rtc->hw->regmap, rtc->alarm_start,
+ &data[rtc->data_start], rtc->alarm_len);
if (ret < 0)
return ret;
@@ -186,14 +193,14 @@ static int da9063_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
return ret;
}
- ret = regmap_bulk_write(rtc->hw->regmap, DA9063_REG_ALARM_S,
- data, RTC_DATA_LEN);
+ ret = regmap_bulk_write(rtc->hw->regmap, rtc->alarm_start,
+ &data[rtc->data_start], rtc->alarm_len);
if (ret < 0) {
dev_err(dev, "Failed to write alarm: %d\n", ret);
return ret;
}
- rtc->alarm_time = alrm->time;
+ da9063_data_to_tm(data, &rtc->alarm_time);
if (alrm->enabled) {
ret = da9063_rtc_start_alarm(dev);
@@ -218,7 +225,7 @@ static irqreturn_t da9063_alarm_event(int irq, void *data)
{
struct da9063_rtc *rtc = data;
- regmap_update_bits(rtc->hw->regmap, DA9063_REG_ALARM_Y,
+ regmap_update_bits(rtc->hw->regmap, rtc->alarm_year,
DA9063_ALARM_ON, 0);
rtc->rtc_sync = true;
@@ -257,7 +264,23 @@ static int da9063_rtc_probe(struct platform_device *pdev)
goto err;
}
- ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_S,
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ if (da9063->variant_code == PMIC_DA9063_AD) {
+ rtc->alarm_year = DA9063_AD_REG_ALARM_Y;
+ rtc->alarm_start = DA9063_AD_REG_ALARM_MI;
+ rtc->alarm_len = RTC_ALARM_DATA_LEN;
+ rtc->data_start = RTC_MIN;
+ } else {
+ rtc->alarm_year = DA9063_BB_REG_ALARM_Y;
+ rtc->alarm_start = DA9063_BB_REG_ALARM_S;
+ rtc->alarm_len = RTC_DATA_LEN;
+ rtc->data_start = RTC_SEC;
+ }
+
+ ret = regmap_update_bits(da9063->regmap, rtc->alarm_start,
DA9063_ALARM_STATUS_TICK | DA9063_ALARM_STATUS_ALARM,
0);
if (ret < 0) {
@@ -265,7 +288,7 @@ static int da9063_rtc_probe(struct platform_device *pdev)
goto err;
}
- ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_S,
+ ret = regmap_update_bits(da9063->regmap, rtc->alarm_start,
DA9063_ALARM_STATUS_ALARM,
DA9063_ALARM_STATUS_ALARM);
if (ret < 0) {
@@ -273,25 +296,22 @@ static int da9063_rtc_probe(struct platform_device *pdev)
goto err;
}
- ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_Y,
+ ret = regmap_update_bits(da9063->regmap, rtc->alarm_year,
DA9063_TICK_ON, 0);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to disable TICKs\n");
goto err;
}
- ret = regmap_bulk_read(da9063->regmap, DA9063_REG_ALARM_S,
- data, RTC_DATA_LEN);
+ data[RTC_SEC] = 0;
+ ret = regmap_bulk_read(da9063->regmap, rtc->alarm_start,
+ &data[rtc->data_start], rtc->alarm_len);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to read initial alarm data: %d\n",
ret);
goto err;
}
- rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
- if (!rtc)
- return -ENOMEM;
-
platform_set_drvdata(pdev, rtc);
irq_alarm = platform_get_irq_byname(pdev, "ALARM");
diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h
index 00a9aac..b92a326 100644
--- a/include/linux/mfd/da9063/core.h
+++ b/include/linux/mfd/da9063/core.h
@@ -34,7 +34,8 @@ enum da9063_models {
};
enum da9063_variant_codes {
- PMIC_DA9063_BB = 0x5
+ PMIC_DA9063_AD = 0x3,
+ PMIC_DA9063_BB = 0x5,
};
/* Interrupts */
diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h
index 09a85c6..2e0ba6d 100644
--- a/include/linux/mfd/da9063/registers.h
+++ b/include/linux/mfd/da9063/registers.h
@@ -104,16 +104,27 @@
#define DA9063_REG_COUNT_D 0x43
#define DA9063_REG_COUNT_MO 0x44
#define DA9063_REG_COUNT_Y 0x45
-#define DA9063_REG_ALARM_S 0x46
-#define DA9063_REG_ALARM_MI 0x47
-#define DA9063_REG_ALARM_H 0x48
-#define DA9063_REG_ALARM_D 0x49
-#define DA9063_REG_ALARM_MO 0x4A
-#define DA9063_REG_ALARM_Y 0x4B
-#define DA9063_REG_SECOND_A 0x4C
-#define DA9063_REG_SECOND_B 0x4D
-#define DA9063_REG_SECOND_C 0x4E
-#define DA9063_REG_SECOND_D 0x4F
+
+#define DA9063_AD_REG_ALARM_MI 0x46
+#define DA9063_AD_REG_ALARM_H 0x47
+#define DA9063_AD_REG_ALARM_D 0x48
+#define DA9063_AD_REG_ALARM_MO 0x49
+#define DA9063_AD_REG_ALARM_Y 0x4A
+#define DA9063_AD_REG_SECOND_A 0x4B
+#define DA9063_AD_REG_SECOND_B 0x4C
+#define DA9063_AD_REG_SECOND_C 0x4D
+#define DA9063_AD_REG_SECOND_D 0x4E
+
+#define DA9063_BB_REG_ALARM_S 0x46
+#define DA9063_BB_REG_ALARM_MI 0x47
+#define DA9063_BB_REG_ALARM_H 0x48
+#define DA9063_BB_REG_ALARM_D 0x49
+#define DA9063_BB_REG_ALARM_MO 0x4A
+#define DA9063_BB_REG_ALARM_Y 0x4B
+#define DA9063_BB_REG_SECOND_A 0x4C
+#define DA9063_BB_REG_SECOND_B 0x4D
+#define DA9063_BB_REG_SECOND_C 0x4E
+#define DA9063_BB_REG_SECOND_D 0x4F
/* Sequencer Control Registers */
#define DA9063_REG_SEQ 0x81
@@ -223,37 +234,67 @@
#define DA9063_REG_CONFIG_J 0x10F
#define DA9063_REG_CONFIG_K 0x110
#define DA9063_REG_CONFIG_L 0x111
-#define DA9063_REG_CONFIG_M 0x112
-#define DA9063_REG_CONFIG_N 0x113
-
-#define DA9063_REG_MON_REG_1 0x114
-#define DA9063_REG_MON_REG_2 0x115
-#define DA9063_REG_MON_REG_3 0x116
-#define DA9063_REG_MON_REG_4 0x117
-#define DA9063_REG_MON_REG_5 0x11E
-#define DA9063_REG_MON_REG_6 0x11F
-#define DA9063_REG_TRIM_CLDR 0x120
+
+#define DA9063_AD_REG_MON_REG_1 0x112
+#define DA9063_AD_REG_MON_REG_2 0x113
+#define DA9063_AD_REG_MON_REG_3 0x114
+#define DA9063_AD_REG_MON_REG_4 0x115
+#define DA9063_AD_REG_MON_REG_5 0x116
+#define DA9063_AD_REG_MON_REG_6 0x117
+#define DA9063_AD_REG_TRIM_CLDR 0x118
+
+#define DA9063_AD_REG_GP_ID_0 0x119
+#define DA9063_AD_REG_GP_ID_1 0x11A
+#define DA9063_AD_REG_GP_ID_2 0x11B
+#define DA9063_AD_REG_GP_ID_3 0x11C
+#define DA9063_AD_REG_GP_ID_4 0x11D
+#define DA9063_AD_REG_GP_ID_5 0x11E
+#define DA9063_AD_REG_GP_ID_6 0x11F
+#define DA9063_AD_REG_GP_ID_7 0x120
+#define DA9063_AD_REG_GP_ID_8 0x121
+#define DA9063_AD_REG_GP_ID_9 0x122
+#define DA9063_AD_REG_GP_ID_10 0x123
+#define DA9063_AD_REG_GP_ID_11 0x124
+#define DA9063_AD_REG_GP_ID_12 0x125
+#define DA9063_AD_REG_GP_ID_13 0x126
+#define DA9063_AD_REG_GP_ID_14 0x127
+#define DA9063_AD_REG_GP_ID_15 0x128
+#define DA9063_AD_REG_GP_ID_16 0x129
+#define DA9063_AD_REG_GP_ID_17 0x12A
+#define DA9063_AD_REG_GP_ID_18 0x12B
+#define DA9063_AD_REG_GP_ID_19 0x12C
+
+#define DA9063_BB_REG_CONFIG_M 0x112
+#define DA9063_BB_REG_CONFIG_N 0x113
+
+#define DA9063_BB_REG_MON_REG_1 0x114
+#define DA9063_BB_REG_MON_REG_2 0x115
+#define DA9063_BB_REG_MON_REG_3 0x116
+#define DA9063_BB_REG_MON_REG_4 0x117
+#define DA9063_BB_REG_MON_REG_5 0x11E
+#define DA9063_BB_REG_MON_REG_6 0x11F
+#define DA9063_BB_REG_TRIM_CLDR 0x120
/* General Purpose Registers */
-#define DA9063_REG_GP_ID_0 0x121
-#define DA9063_REG_GP_ID_1 0x122
-#define DA9063_REG_GP_ID_2 0x123
-#define DA9063_REG_GP_ID_3 0x124
-#define DA9063_REG_GP_ID_4 0x125
-#define DA9063_REG_GP_ID_5 0x126
-#define DA9063_REG_GP_ID_6 0x127
-#define DA9063_REG_GP_ID_7 0x128
-#define DA9063_REG_GP_ID_8 0x129
-#define DA9063_REG_GP_ID_9 0x12A
-#define DA9063_REG_GP_ID_10 0x12B
-#define DA9063_REG_GP_ID_11 0x12C
-#define DA9063_REG_GP_ID_12 0x12D
-#define DA9063_REG_GP_ID_13 0x12E
-#define DA9063_REG_GP_ID_14 0x12F
-#define DA9063_REG_GP_ID_15 0x130
-#define DA9063_REG_GP_ID_16 0x131
-#define DA9063_REG_GP_ID_17 0x132
-#define DA9063_REG_GP_ID_18 0x133
-#define DA9063_REG_GP_ID_19 0x134
+#define DA9063_BB_REG_GP_ID_0 0x121
+#define DA9063_BB_REG_GP_ID_1 0x122
+#define DA9063_BB_REG_GP_ID_2 0x123
+#define DA9063_BB_REG_GP_ID_3 0x124
+#define DA9063_BB_REG_GP_ID_4 0x125
+#define DA9063_BB_REG_GP_ID_5 0x126
+#define DA9063_BB_REG_GP_ID_6 0x127
+#define DA9063_BB_REG_GP_ID_7 0x128
+#define DA9063_BB_REG_GP_ID_8 0x129
+#define DA9063_BB_REG_GP_ID_9 0x12A
+#define DA9063_BB_REG_GP_ID_10 0x12B
+#define DA9063_BB_REG_GP_ID_11 0x12C
+#define DA9063_BB_REG_GP_ID_12 0x12D
+#define DA9063_BB_REG_GP_ID_13 0x12E
+#define DA9063_BB_REG_GP_ID_14 0x12F
+#define DA9063_BB_REG_GP_ID_15 0x130
+#define DA9063_BB_REG_GP_ID_16 0x131
+#define DA9063_BB_REG_GP_ID_17 0x132
+#define DA9063_BB_REG_GP_ID_18 0x133
+#define DA9063_BB_REG_GP_ID_19 0x134
/* Chip ID and variant */
#define DA9063_REG_CHIP_ID 0x181
@@ -404,10 +445,10 @@
/* DA9063_REG_CONTROL_B (addr=0x0F) */
#define DA9063_CHG_SEL 0x01
#define DA9063_WATCHDOG_PD 0x02
-#define DA9063_RESET_BLINKING 0x04
+#define DA9063_BB_RESET_BLINKING 0x04
#define DA9063_NRES_MODE 0x08
#define DA9063_NONKEY_LOCK 0x10
-#define DA9063_BUCK_SLOWSTART 0x80
+#define DA9063_BB_BUCK_SLOWSTART 0x80
/* DA9063_REG_CONTROL_C (addr=0x10) */
#define DA9063_DEBOUNCING_MASK 0x07
@@ -467,7 +508,7 @@
#define DA9063_GPADC_PAUSE 0x02
#define DA9063_PMIF_DIS 0x04
#define DA9063_HS2WIRE_DIS 0x08
-#define DA9063_CLDR_PAUSE 0x10
+#define DA9063_BB_CLDR_PAUSE 0x10
#define DA9063_BBAT_DIS 0x20
#define DA9063_OUT_32K_PAUSE 0x40
#define DA9063_PMCONT_DIS 0x80
@@ -844,7 +885,7 @@
#define DA9063_MONITOR 0x40
/* DA9063_REG_ALARM_S (addr=0x46) */
-#define DA9063_ALARM_S_MASK 0x3F
+#define DA9063_BB_ALARM_S_MASK 0x3F
#define DA9063_ALARM_STATUS_ALARM 0x80
#define DA9063_ALARM_STATUS_TICK 0x40
/* DA9063_REG_ALARM_MI (addr=0x47) */
--
end-of-patch for RFC V2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists