lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 24 Jul 2014 13:08:09 -0700
From:	Andrew Duggan <aduggan@...aptics.com>
To:	Christopher Heiny <cheiny@...aptics.com>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	<linux-input@...r.kernel.org>
CC:	Benjamin Tissoires <benjamin.tissoires@...hat.com>,
	<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] Input: synaptics-rmi4 - fix compiler warnings in F11

On 07/23/2014 06:41 PM, Christopher Heiny wrote:
> On 07/22/2014 11:11 PM, Dmitry Torokhov wrote:
>> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
>
> I've reviewed this, and can say:
>
> Acked-by: Christopher Heiny <cheiny@...aptics.com>
>
> but I haven't had a chance to apply it to my build tree.
>
> Andrew - I'll be OOO for a couple of days.  Can you do that, and add a 
> Tested-by: or rev the patch, as appropriate?
>
>                 Thanks,
>                     Chris
>
It compiles cleanly and works on my test system.

Tested-by: Andrew Duggan <aduggan@...aptics.com>
>> ---
>>   drivers/input/rmi4/rmi_f11.c | 135 
>> +++++++++++++++++++++++--------------------
>>   1 file changed, 71 insertions(+), 64 deletions(-)
>>
>> diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
>> index b739d31..7af4f68 100644
>> --- a/drivers/input/rmi4/rmi_f11.c
>> +++ b/drivers/input/rmi4/rmi_f11.c
>> @@ -553,7 +553,7 @@ struct f11_data {
>>       unsigned long *result_bits;
>>   };
>>
>> -enum finger_state_values {
>> +enum f11_finger_state {
>>       F11_NO_FINGER    = 0x00,
>>       F11_PRESENT    = 0x01,
>>       F11_INACCURATE    = 0x02,
>> @@ -563,12 +563,14 @@ enum finger_state_values {
>>   /** F11_INACCURATE state is overloaded to indicate pen present. */
>>   #define F11_PEN F11_INACCURATE
>>
>> -static int get_tool_type(struct f11_2d_sensor *sensor, u8 finger_state)
>> +static int rmi_f11_get_tool_type(struct f11_2d_sensor *sensor,
>> +                 enum f11_finger_state finger_state)
>>   {
>>       if (IS_ENABLED(CONFIG_RMI4_F11_PEN) &&
>>               sensor->sens_query.has_pen &&
>>               finger_state == F11_PEN)
>>           return MT_TOOL_PEN;
>> +
>>       return MT_TOOL_FINGER;
>>   }
>>
>> @@ -603,36 +605,32 @@ static void rmi_f11_rel_pos_report(struct 
>> f11_2d_sensor *sensor, u8 n_finger)
>>
>>   static void rmi_f11_abs_pos_report(struct f11_data *f11,
>>                      struct f11_2d_sensor *sensor,
>> -                   u8 finger_state, u8 n_finger)
>> +                   enum f11_finger_state finger_state,
>> +                   u8 n_finger)
>>   {
>>       struct f11_2d_data *data = &sensor->data;
>> +    struct input_dev *input = sensor->input;
>>       struct rmi_f11_2d_axis_alignment *axis_align = 
>> &sensor->axis_align;
>> +    u8 *pos_data = &data->abs_pos[n_finger * RMI_F11_ABS_BYTES];
>>       u16 x, y, z;
>>       int w_x, w_y, w_max, w_min, orient;
>> -    int temp;
>> -    u8 abs_base = n_finger * RMI_F11_ABS_BYTES;
>> +    int tool_type = rmi_f11_get_tool_type(sensor, finger_state);
>> +
>> +    if (sensor->type_a) {
>> +        input_report_abs(input, ABS_MT_TRACKING_ID, n_finger);
>> +        input_report_abs(input, ABS_MT_TOOL_TYPE, tool_type);
>> +    } else {
>> +        input_mt_slot(input, n_finger);
>> +        input_mt_report_slot_state(input, tool_type,
>> +                       finger_state != F11_NO_FINGER);
>> +    }
>>
>>       if (finger_state) {
>> -        x = (data->abs_pos[abs_base] << 4) |
>> -            (data->abs_pos[abs_base + 2] & 0x0F);
>> -        y = (data->abs_pos[abs_base + 1] << 4) |
>> -            (data->abs_pos[abs_base + 2] >> 4);
>> -        w_x = data->abs_pos[abs_base + 3] & 0x0F;
>> -        w_y = data->abs_pos[abs_base + 3] >> 4;
>> -        w_max = max(w_x, w_y);
>> -        w_min = min(w_x, w_y);
>> -        z = data->abs_pos[abs_base + 4];
>> -
>> -        if (axis_align->swap_axes) {
>> -            temp = x;
>> -            x = y;
>> -            y = temp;
>> -            temp = w_x;
>> -            w_x = w_y;
>> -            w_y = temp;
>> -        }
>> +        x = (pos_data[0] << 4) | (pos_data[2] & 0x0F);
>> +        y = (pos_data[1] << 4) | (pos_data[2] >> 4);
>>
>> -        orient = w_x > w_y ? 1 : 0;
>> +        if (axis_align->swap_axes)
>> +            swap(x, y);
>>
>>           if (axis_align->flip_x)
>>               x = max(sensor->max_x - x, 0);
>> @@ -641,13 +639,13 @@ static void rmi_f11_abs_pos_report(struct 
>> f11_data *f11,
>>               y = max(sensor->max_y - y, 0);
>>
>>           /*
>> -        * here checking if X offset or y offset are specified is
>> -        *  redundant.  We just add the offsets or, clip the values
>> -        *
>> -        * note: offsets need to be done before clipping occurs,
>> -        * or we could get funny values that are outside
>> -        * clipping boundaries.
>> -        */
>> +         * Here checking if X offset or y offset are specified is
>> +         * redundant. We just add the offsets or clip the values.
>> +         *
>> +         * Note: offsets need to be applied before clipping occurs,
>> +         * or we could get funny values that are outside of
>> +         * clipping boundaries.
>> +         */
>>           x += axis_align->offset_x;
>>           y += axis_align->offset_y;
>>           x =  max(axis_align->clip_x_low, x);
>> @@ -657,41 +655,44 @@ static void rmi_f11_abs_pos_report(struct 
>> f11_data *f11,
>>           if (axis_align->clip_y_high)
>>               y =  min(axis_align->clip_y_high, y);
>>
>> -    }
>> +        w_x = pos_data[3] & 0x0f;
>> +        w_y = pos_data[3] >> 4;
>>
>> -    /* Some UIs ignore W of zero, so we fudge it to 1 for pens.  This
>> -     * only appears to be an issue when reporting pens, not plain old
>> -     * fingers. */
>> -    if (IS_ENABLED(CONFIG_RMI4_F11_PEN) &&
>> -            get_tool_type(sensor, finger_state) == MT_TOOL_PEN) {
>> -        w_max = max(1, w_max);
>> -        w_min = max(1, w_min);
>> -    }
>> +        if (axis_align->swap_axes)
>> +            swap(w_x, w_y);
>>
>> -    if (sensor->type_a) {
>> -        input_report_abs(sensor->input, ABS_MT_TRACKING_ID, n_finger);
>> -        input_report_abs(sensor->input, ABS_MT_TOOL_TYPE,
>> -                    get_tool_type(sensor, finger_state));
>> -    } else {
>> -        input_mt_slot(sensor->input, n_finger);
>> -        input_mt_report_slot_state(sensor->input,
>> -            get_tool_type(sensor, finger_state), finger_state);
>> -    }
>> +        orient = w_x > w_y ? 1 : 0;
>> +
>> +        w_max = max(w_x, w_y);
>> +        w_min = min(w_x, w_y);
>> +
>> +        /*
>> +         * Some UIs ignore W of zero, so we fudge it to 1 for pens.  
>> This
>> +         * only appears to be an issue when reporting pens, not 
>> plain old
>> +         * fingers.
>> +         */
>> +        if (tool_type == MT_TOOL_PEN) {
>> +            w_max = max(1, w_max);
>> +            w_min = max(1, w_min);
>> +        }
>> +
>> +        z = pos_data[4];
>> +
>> +        input_report_abs(input, ABS_MT_PRESSURE, z);
>> +        input_report_abs(input, ABS_MT_TOUCH_MAJOR, w_max);
>> +        input_report_abs(input, ABS_MT_TOUCH_MINOR, w_min);
>> +        input_report_abs(input, ABS_MT_ORIENTATION, orient);
>> +        input_report_abs(input, ABS_MT_POSITION_X, x);
>> +        input_report_abs(input, ABS_MT_POSITION_Y, y);
>>
>> -    if (finger_state) {
>> -        input_report_abs(sensor->input, ABS_MT_PRESSURE, z);
>> -        input_report_abs(sensor->input, ABS_MT_TOUCH_MAJOR, w_max);
>> -        input_report_abs(sensor->input, ABS_MT_TOUCH_MINOR, w_min);
>> -        input_report_abs(sensor->input, ABS_MT_ORIENTATION, orient);
>> -        input_report_abs(sensor->input, ABS_MT_POSITION_X, x);
>> -        input_report_abs(sensor->input, ABS_MT_POSITION_Y, y);
>>           dev_dbg(&sensor->fn->dev,
>>               "finger[%d]:%d - x:%d y:%d z:%d w_max:%d w_min:%d\n",
>>               n_finger, finger_state, x, y, z, w_max, w_min);
>>       }
>> +
>>       /* MT sync between fingers */
>>       if (sensor->type_a)
>> -        input_mt_sync(sensor->input);
>> +        input_mt_sync(input);
>>   }
>>
>>   static void rmi_f11_finger_handler(struct f11_data *f11,
>> @@ -710,25 +711,31 @@ static void rmi_f11_finger_handler(struct 
>> f11_data *f11,
>>           /* Possible of having 4 fingers per f_statet register */
>>           finger_state = (f_state[i / 4] >> (2 * (i % 4))) &
>>                       FINGER_STATE_MASK;
>> -        if (finger_state == F11_RESERVED) {
>> -            pr_err("%s: Invalid finger state[%d]:0x%02x.", __func__,
>> -                    i, finger_state);
>> +        switch (finger_state) {
>> +        case F11_RESERVED:
>> +            pr_err("Invalid finger state[%d]: 0x%02x", i, 
>> finger_state);
>>               continue;
>> -        } else if ((finger_state == F11_PRESENT) ||
>> -                (finger_state == F11_INACCURATE)) {
>> +
>> +        case F11_PRESENT:
>> +        case F11_INACCURATE:
>>               finger_pressed_count++;
>> +            break;
>> +
>> +        case F11_NO_FINGER:
>> +            break;
>>           }
>>
>>           abs_bits = bitmap_and(f11->result_bits, irq_bits, 
>> f11->abs_mask,
>> -                num_irq_regs);
>> +                      num_irq_regs);
>>           if (abs_bits)
>>               rmi_f11_abs_pos_report(f11, sensor, finger_state, i);
>>
>>           rel_bits = bitmap_and(f11->result_bits, irq_bits, 
>> f11->rel_mask,
>> -                num_irq_regs);
>> +                      num_irq_regs);
>>           if (rel_bits)
>>               rmi_f11_rel_pos_report(sensor, i);
>>       }
>> +
>>       input_mt_sync_frame(sensor->input);
>>       input_sync(sensor->input);
>>   }
>>
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists