| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 14 Aug 2014 16:25:27 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Kukjin Kim <kgene.kim@...sung.com>
Cc: Felipe Balbi <balbi@...com>,
Kishon Vijay Abraham I <kishon@...com>,
Kamil Debski <k.debski@...sung.com>,
Vivek Gautam <gautam.vivek@...sung.com>,
Mark Brown <broonie@...aro.org>,
Kyungmin Park <kyungmin.park@...sung.com>,
linux-samsung-soc@...r.kernel.org, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, b.zolnierkie@...sung.com
Subject: [PATCH 5/5] usb: phy: samsung: remove old common USB PHY code
drivers/usb/phy/phy-samsung-usb[2,3] drivers got replaced by
drivers/phy/phy-samsung-usb[2,3] ones and the old common Samsung
USB PHY code is no longer used.
Cc: Kamil Debski <k.debski@...sung.com>
Cc: Vivek Gautam <gautam.vivek@...sung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
---
drivers/usb/phy/Kconfig | 7 -
drivers/usb/phy/Makefile | 1 -
drivers/usb/phy/phy-samsung-usb.c | 241 ------------------
drivers/usb/phy/phy-samsung-usb.h | 349 ---------------------------
include/linux/platform_data/samsung-usbphy.h | 27 ---
5 files changed, 625 deletions(-)
delete mode 100644 drivers/usb/phy/phy-samsung-usb.c
delete mode 100644 drivers/usb/phy/phy-samsung-usb.h
delete mode 100644 include/linux/platform_data/samsung-usbphy.h
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 0cd1f44..7012a82 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -71,13 +71,6 @@ config AM335X_PHY_USB
This driver provides PHY support for that phy which part for the
AM335x SoC.
-config SAMSUNG_USBPHY
- tristate
- help
- Enable this to support Samsung USB phy helper driver for Samsung SoCs.
- This driver provides common interface to interact, for Samsung USB 2.0 PHY
- driver and later for Samsung USB 3.0 PHY driver.
-
config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 75f2bba..1e38a6f 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o
obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o
-obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o
obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o
obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o
diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
deleted file mode 100644
index ac025ca..0000000
--- a/drivers/usb/phy/phy-samsung-usb.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/* linux/drivers/usb/phy/phy-samsung-usb.c
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Author: Praveen Paneri <p.paneri@...sung.com>
- *
- * Samsung USB-PHY helper driver with common function calls;
- * interacts with Samsung USB 2.0 PHY controller driver and later
- * with Samsung USB 3.0 PHY driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/usb/samsung_usb_phy.h>
-
-#include "phy-samsung-usb.h"
-
-int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
-{
- struct device_node *usbphy_sys;
-
- /* Getting node for system controller interface for usb-phy */
- usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys");
- if (!usbphy_sys) {
- dev_err(sphy->dev, "No sys-controller interface for usb-phy\n");
- return -ENODEV;
- }
-
- sphy->pmuregs = of_iomap(usbphy_sys, 0);
-
- if (sphy->pmuregs == NULL) {
- dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
- goto err0;
- }
-
- sphy->sysreg = of_iomap(usbphy_sys, 1);
-
- /*
- * Not returning error code here, since this situation is not fatal.
- * Few SoCs may not have this switch available
- */
- if (sphy->sysreg == NULL)
- dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n");
-
- of_node_put(usbphy_sys);
-
- return 0;
-
-err0:
- of_node_put(usbphy_sys);
- return -ENXIO;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt);
-
-/*
- * Set isolation here for phy.
- * Here 'on = true' would mean USB PHY block is isolated, hence
- * de-activated and vice-versa.
- */
-void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
-{
- void __iomem *reg = NULL;
- u32 reg_val;
- u32 en_mask = 0;
-
- if (!sphy->pmuregs) {
- dev_warn(sphy->dev, "Can't set pmu isolation\n");
- return;
- }
-
- if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
- reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset;
- en_mask = sphy->drv_data->devphy_en_mask;
- } else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
- reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset;
- en_mask = sphy->drv_data->hostphy_en_mask;
- }
-
- reg_val = readl(reg);
-
- if (on)
- reg_val &= ~en_mask;
- else
- reg_val |= en_mask;
-
- writel(reg_val, reg);
-
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) {
- writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0);
- writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL1);
- }
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
-
-/*
- * Configure the mode of working of usb-phy here: HOST/DEVICE.
- */
-void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
-{
- u32 reg;
-
- if (!sphy->sysreg) {
- dev_warn(sphy->dev, "Can't configure specified phy mode\n");
- return;
- }
-
- reg = readl(sphy->sysreg);
-
- if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
- reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
- else if (sphy->phy_type == USB_PHY_TYPE_HOST)
- reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;
-
- writel(reg, sphy->sysreg);
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel);
-
-/*
- * PHYs are different for USB Device and USB Host.
- * This make sure that correct PHY type is selected before
- * any operation on PHY.
- */
-int samsung_usbphy_set_type(struct usb_phy *phy,
- enum samsung_usb_phy_type phy_type)
-{
- struct samsung_usbphy *sphy = phy_to_sphy(phy);
-
- sphy->phy_type = phy_type;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_set_type);
-
-int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
- unsigned long rate)
-{
- unsigned int clksel;
-
- switch (rate) {
- case 12 * MHZ:
- clksel = PHYCLK_CLKSEL_12M;
- break;
- case 24 * MHZ:
- clksel = PHYCLK_CLKSEL_24M;
- break;
- case 48 * MHZ:
- clksel = PHYCLK_CLKSEL_48M;
- break;
- default:
- dev_err(sphy->dev,
- "Invalid reference clock frequency: %lu\n", rate);
- return -EINVAL;
- }
-
- return clksel;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_64xx);
-
-int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
- unsigned long rate)
-{
- unsigned int clksel;
-
- switch (rate) {
- case 9600 * KHZ:
- clksel = FSEL_CLKSEL_9600K;
- break;
- case 10 * MHZ:
- clksel = FSEL_CLKSEL_10M;
- break;
- case 12 * MHZ:
- clksel = FSEL_CLKSEL_12M;
- break;
- case 19200 * KHZ:
- clksel = FSEL_CLKSEL_19200K;
- break;
- case 20 * MHZ:
- clksel = FSEL_CLKSEL_20M;
- break;
- case 24 * MHZ:
- clksel = FSEL_CLKSEL_24M;
- break;
- case 50 * MHZ:
- clksel = FSEL_CLKSEL_50M;
- break;
- default:
- dev_err(sphy->dev,
- "Invalid reference clock frequency: %lu\n", rate);
- return -EINVAL;
- }
-
- return clksel;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_4x12);
-
-/*
- * Returns reference clock frequency selection value
- */
-int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
-{
- struct clk *ref_clk;
- unsigned long rate;
- int refclk_freq;
-
- /*
- * In exynos5250 USB host and device PHY use
- * external crystal clock XXTI
- */
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
- ref_clk = clk_get(sphy->dev, "ext_xtal");
- else
- ref_clk = clk_get(sphy->dev, "xusbxti");
- if (IS_ERR(ref_clk)) {
- dev_err(sphy->dev, "Failed to get reference clock\n");
- return PTR_ERR(ref_clk);
- }
-
- rate = clk_get_rate(ref_clk);
- refclk_freq = sphy->drv_data->rate_to_clksel(sphy, rate);
-
- clk_put(ref_clk);
-
- return refclk_freq;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_get_refclk_freq);
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
deleted file mode 100644
index 68771bf..0000000
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ /dev/null
@@ -1,349 +0,0 @@
-/* linux/drivers/usb/phy/phy-samsung-usb.h
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
- * OHCI-EXYNOS controllers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/usb/phy.h>
-
-/* Register definitions */
-
-#define SAMSUNG_PHYPWR (0x00)
-
-#define PHYPWR_NORMAL_MASK (0x19 << 0)
-#define PHYPWR_OTG_DISABLE (0x1 << 4)
-#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
-#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
-/* For Exynos4 */
-#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
-#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
-
-#define SAMSUNG_PHYCLK (0x04)
-
-#define PHYCLK_MODE_USB11 (0x1 << 6)
-#define PHYCLK_EXT_OSC (0x1 << 5)
-#define PHYCLK_COMMON_ON_N (0x1 << 4)
-#define PHYCLK_ID_PULL (0x1 << 2)
-#define PHYCLK_CLKSEL_MASK (0x3 << 0)
-#define PHYCLK_CLKSEL_48M (0x0 << 0)
-#define PHYCLK_CLKSEL_12M (0x2 << 0)
-#define PHYCLK_CLKSEL_24M (0x3 << 0)
-
-#define SAMSUNG_RSTCON (0x08)
-
-#define RSTCON_PHYLINK_SWRST (0x1 << 2)
-#define RSTCON_HLINK_SWRST (0x1 << 1)
-#define RSTCON_SWRST (0x1 << 0)
-
-/* EXYNOS4X12 */
-#define EXYNOS4X12_PHY_HSIC_CTRL0 (0x04)
-#define EXYNOS4X12_PHY_HSIC_CTRL1 (0x08)
-
-#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12)
-#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9)
-#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6)
-
-#define RSTCON_HOSTPHY_SWRST (0xf << 3)
-
-/* EXYNOS5 */
-#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
-
-#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
-
-#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19)
-#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19)
-#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19)
-#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19)
-
-#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
-#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
-
-#define FSEL_CLKSEL_50M (0x7)
-#define FSEL_CLKSEL_24M (0x5)
-#define FSEL_CLKSEL_20M (0x4)
-#define FSEL_CLKSEL_19200K (0x3)
-#define FSEL_CLKSEL_12M (0x2)
-#define FSEL_CLKSEL_10M (0x1)
-#define FSEL_CLKSEL_9600K (0x0)
-
-#define HOST_CTRL0_TESTBURNIN (0x1 << 11)
-#define HOST_CTRL0_RETENABLE (0x1 << 10)
-#define HOST_CTRL0_COMMONON_N (0x1 << 9)
-#define HOST_CTRL0_SIDDQ (0x1 << 6)
-#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
-#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
-#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
-#define HOST_CTRL0_UTMISWRST (0x1 << 2)
-#define HOST_CTRL0_LINKSWRST (0x1 << 1)
-#define HOST_CTRL0_PHYSWRST (0x1 << 0)
-
-#define EXYNOS5_PHY_HOST_TUNE0 (0x04)
-
-#define EXYNOS5_PHY_HSIC_CTRL1 (0x10)
-
-#define EXYNOS5_PHY_HSIC_TUNE1 (0x14)
-
-#define EXYNOS5_PHY_HSIC_CTRL2 (0x20)
-
-#define EXYNOS5_PHY_HSIC_TUNE2 (0x24)
-
-#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23)
-#define HSIC_CTRL_REFCLKSEL (0x2 << 23)
-
-#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16)
-#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16)
-#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16)
-#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16)
-#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16)
-#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16)
-#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16)
-
-#define HSIC_CTRL_SIDDQ (0x1 << 6)
-#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
-#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
-#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
-#define HSIC_CTRL_UTMISWRST (0x1 << 2)
-#define HSIC_CTRL_PHYSWRST (0x1 << 0)
-
-#define EXYNOS5_PHY_HOST_EHCICTRL (0x30)
-
-#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29)
-#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28)
-#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27)
-#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26)
-
-#define EXYNOS5_PHY_HOST_OHCICTRL (0x34)
-
-#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3)
-#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2)
-#define HOST_OHCICTRL_CNTSEL (0x1 << 1)
-#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0)
-
-#define EXYNOS5_PHY_OTG_SYS (0x38)
-
-#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14)
-#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13)
-#define OTG_SYS_PHY0_SWRST (0x1 << 12)
-
-#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9)
-#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9)
-#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9)
-#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9)
-
-#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8)
-#define OTG_SYS_COMMON_ON (0x1 << 7)
-
-#define OTG_SYS_FSEL_MASK (0x7 << 4)
-#define OTG_SYS_FSEL(_x) ((_x) << 4)
-
-#define OTG_SYS_FORCESLEEP (0x1 << 3)
-#define OTG_SYS_OTGDISABLE (0x1 << 2)
-#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
-#define OTG_SYS_FORCESUSPEND (0x1 << 0)
-
-#define EXYNOS5_PHY_OTG_TUNE (0x40)
-
-/* EXYNOS5: USB 3.0 DRD */
-#define EXYNOS5_DRD_LINKSYSTEM (0x04)
-
-#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
-#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
-#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27)
-
-#define EXYNOS5_DRD_PHYUTMI (0x08)
-
-#define PHYUTMI_OTGDISABLE (0x1 << 6)
-#define PHYUTMI_FORCESUSPEND (0x1 << 1)
-#define PHYUTMI_FORCESLEEP (0x1 << 0)
-
-#define EXYNOS5_DRD_PHYPIPE (0x0c)
-
-#define EXYNOS5_DRD_PHYCLKRST (0x10)
-
-#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
-#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
-
-#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
-#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
-
-#define PHYCLKRST_SSC_EN (0x1 << 20)
-#define PHYCLKRST_REF_SSP_EN (0x1 << 19)
-#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18)
-
-#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
-
-#define PHYCLKRST_FSEL_MASK (0x3f << 5)
-#define PHYCLKRST_FSEL(_x) ((_x) << 5)
-#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
-#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
-#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
-#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
-
-#define PHYCLKRST_RETENABLEN (0x1 << 4)
-
-#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
-#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
-#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
-
-#define PHYCLKRST_PORTRESET (0x1 << 1)
-#define PHYCLKRST_COMMONONN (0x1 << 0)
-
-#define EXYNOS5_DRD_PHYREG0 (0x14)
-#define EXYNOS5_DRD_PHYREG1 (0x18)
-
-#define EXYNOS5_DRD_PHYPARAM0 (0x1c)
-
-#define PHYPARAM0_REF_USE_PAD (0x1 << 31)
-#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
-#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
-
-#define EXYNOS5_DRD_PHYPARAM1 (0x20)
-
-#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
-#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
-
-#define EXYNOS5_DRD_PHYTERM (0x24)
-
-#define EXYNOS5_DRD_PHYTEST (0x28)
-
-#define PHYTEST_POWERDOWN_SSP (0x1 << 3)
-#define PHYTEST_POWERDOWN_HSP (0x1 << 2)
-
-#define EXYNOS5_DRD_PHYADP (0x2c)
-
-#define EXYNOS5_DRD_PHYBATCHG (0x30)
-
-#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2)
-
-#define EXYNOS5_DRD_PHYRESUME (0x34)
-#define EXYNOS5_DRD_LINKPORT (0x44)
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#ifndef KHZ
-#define KHZ (1000)
-#endif
-
-#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4)
-#define S3C64XX_USBPHY_ENABLE (0x1 << 16)
-#define EXYNOS_USBPHY_ENABLE (0x1 << 0)
-#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0)
-
-enum samsung_cpu_type {
- TYPE_S3C64XX,
- TYPE_EXYNOS4210,
- TYPE_EXYNOS4X12,
- TYPE_EXYNOS5250,
-};
-
-struct samsung_usbphy;
-
-/*
- * struct samsung_usbphy_drvdata - driver data for various SoC variants
- * @cpu_type: machine identifier
- * @devphy_en_mask: device phy enable mask for PHY CONTROL register
- * @hostphy_en_mask: host phy enable mask for PHY CONTROL register
- * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
- * mapped address of system controller.
- * @hostphy_reg_offset: offset to HOST PHY CONTROL register from
- * mapped address of system controller.
- *
- * Here we have a separate mask for device type phy.
- * Having different masks for host and device type phy helps
- * in setting independent masks in case of SoCs like S5PV210,
- * in which PHY0 and PHY1 enable bits belong to same register
- * placed at position 0 and 1 respectively.
- * Although for newer SoCs like exynos these bits belong to
- * different registers altogether placed at position 0.
- */
-struct samsung_usbphy_drvdata {
- int cpu_type;
- int devphy_en_mask;
- int hostphy_en_mask;
- u32 devphy_reg_offset;
- u32 hostphy_reg_offset;
- int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long);
- void (*set_isolation)(struct samsung_usbphy *, bool);
- void (*phy_enable)(struct samsung_usbphy *);
- void (*phy_disable)(struct samsung_usbphy *);
-};
-
-/*
- * struct samsung_usbphy - transceiver driver state
- * @phy: transceiver structure
- * @plat: platform data
- * @dev: The parent device supplied to the probe function
- * @clk: usb phy clock
- * @regs: usb phy controller registers memory base
- * @pmuregs: USB device PHY_CONTROL register memory base
- * @sysreg: USB2.0 PHY_CFG register memory base
- * @ref_clk_freq: reference clock frequency selection
- * @drv_data: driver data available for different SoCs
- * @phy_type: Samsung SoCs specific phy types: #HOST
- * #DEVICE
- * @phy_usage: usage count for phy
- * @lock: lock for phy operations
- */
-struct samsung_usbphy {
- struct usb_phy phy;
- struct samsung_usbphy_data *plat;
- struct device *dev;
- struct clk *clk;
- void __iomem *regs;
- void __iomem *pmuregs;
- void __iomem *sysreg;
- int ref_clk_freq;
- const struct samsung_usbphy_drvdata *drv_data;
- enum samsung_usb_phy_type phy_type;
- atomic_t phy_usage;
- spinlock_t lock;
-};
-
-#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
-
-static const struct of_device_id samsung_usbphy_dt_match[];
-
-static inline const struct samsung_usbphy_drvdata
-*samsung_usbphy_get_driver_data(struct platform_device *pdev)
-{
- if (pdev->dev.of_node) {
- const struct of_device_id *match;
- match = of_match_node(samsung_usbphy_dt_match,
- pdev->dev.of_node);
- return match->data;
- }
-
- return (struct samsung_usbphy_drvdata *)
- platform_get_device_id(pdev)->driver_data;
-}
-
-extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
-extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy,
- bool on);
-extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
-extern int samsung_usbphy_set_type(struct usb_phy *phy,
- enum samsung_usb_phy_type phy_type);
-extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy);
-extern int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
- unsigned long rate);
-extern int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
- unsigned long rate);
diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h
deleted file mode 100644
index 1bd24cb..0000000
--- a/include/linux/platform_data/samsung-usbphy.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics Co.Ltd
- * http://www.samsung.com/
- * Author: Praveen Paneri <p.paneri@...sung.com>
- *
- * Defines platform data for samsung usb phy driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __SAMSUNG_USBPHY_PLATFORM_H
-#define __SAMSUNG_USBPHY_PLATFORM_H
-
-/**
- * samsung_usbphy_data - Platform data for USB PHY driver.
- * @pmu_isolation: Function to control usb phy isolation in PMU.
- */
-struct samsung_usbphy_data {
- void (*pmu_isolation)(int on);
-};
-
-extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
-
-#endif /* __SAMSUNG_USBPHY_PLATFORM_H */
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists